From: Thomas Demmer Newsgroups: comp.os.msdos.djgpp Subject: Re: .h files unrecognised Date: Sat, 14 Feb 1998 16:25:07 +0100 Organization: Lehrstuhl fuer Stroemungsmechanik Lines: 28 Message-ID: <34E5B753.DE07A90F@LSTM.Ruhr-UNI-Bochum.De> References: <34E59182 DOT 80F AT which DOT net> NNTP-Posting-Host: bvb.lstm.ruhr-uni-bochum.de Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Precedence: bulk Andrew wrote: > > I have tried to install djgpp on my pc but when I run a small test > program it fails to detect the stdio.h file even though all the .h > files are in the same directory as the program. If I enclose the > stdio.h in quotes and not angle brackets ie. "stdio.h" not , > then the program can find the stdio.h file but it cannot find any of > the files that stdio.h calls. Any help would be greatfully appeciated. The help should be already on your hard-disk. Somewhere there should be a file called readme.1st, that explains how to set the environment variable DJGPP like SET DJGPP=c:/djgpp/djgpp.env -- Ciao Tom ************************************************************* * Thomas Demmer * * Lehrstuhl fuer Stroemungsmechanik * * Ruhr-Uni-Bochum * * Universitaetsstr. 150 * * D-44780 Bochum * * Tel: +49 234 700 6434 * * Fax: +49 234 709 4162 * * http://www.lstm.ruhr-uni-bochum.de/~demmer * *************************************************************