Message-Id: Comments: Authenticated sender is From: "Salvador Eduardo Tropea (SET)" Organization: INTI To: Charles Krug , djgpp AT delorie DOT com Date: Mon, 22 Dec 1997 17:18:00 +0000 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: Will Allegro programs run under RHIDE/Win95 In-reply-to: <349E7C02.192F847A@pentek.com> Precedence: bulk Charles Krug wrote: > I've been working through the Vivace.txt file--I spent yesterday working > on porting my scientific graphics plotter to Allegro. It works okay, > but I have the following questions: > > 1. How gracefully will Rhide handle the change from text to graphics > mode when I run from within the IDE. I had some strange results, so I > started running from the command line. The result depends on the hardware/software that you have installed. In some cases all is ok in others no. Tip 1: Use a monochrome monitor/card to debug (Hercules). Tip 2: Try to avoid the Allegro's mouse. If you really need to debug never turn on the mouse because it can hang RHIDE. (no idea why). > 2. I'm running under Win95. Will Allegro programs run in a dos > window? I'm not overly concerned w/ performance on this project (the > biggest time sink is calculating the pixels) I find the need to > every time I run annoying. Normally you won't have problems, at least not if you have the correct W95 drivers, in general the ones provided by M$ are old and buggy. Ever run in full screen, some drivers goes crazy if you try to put a SVGA mode in a Window. SET ------------------------------------ 0 -------------------------------- Visit my home page: http://www.geocities.com/SiliconValley/Vista/6552/ Salvador Eduardo Tropea (SET). (Electronics Engineer) Alternative e-mail: set-sot AT usa DOT net - ICQ: 2951574 Address: Curapaligue 2124, Caseros, 3 de Febrero Buenos Aires, (1678), ARGENTINA TE: +(541) 759 0013