From: Larry Swanson Newsgroups: comp.graphics.algorithms,comp.os.msdos.djgpp Subject: Re: Double Buffer not working in modes larger than 400x300x16(VESA 2.0) Date: Wed, 15 Oct 1997 19:05:15 -0500 Organization: MidWest Communications, Inc. Lines: 37 Message-ID: <34455A3B.97E10C6B@mwci.net> References: <34417B92 DOT 7B82F875 AT mwci DOT net> NNTP-Posting-Host: dial-34.man.mwci.net Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Precedence: bulk > > > void Buffer_Pixel(int x, int y, int color){ > > DoubleBuffer[ y*screen_width + x ] = color; > > } ^^^ ^^^ > Aren't you missing a '*2' for 2 bytes per pixel, if not > then your screen_width is in bytes already and the '* per_pixel' in the > copy routine is irrelevant. Actually,right now now my Double Buffer is a unsigned short * for some reason.( I should change that to a void * so it would be better. I just noticed my Double Buffer wasn't working right so I hacked an example up quickly. > Also, are you sure that the LFB enabled properly, if not, you'll get a 64K > bank at 0A0000h linear which may cause some problems... Plotting pixels strsight to video memory seems to work fine for me in all modes. My problem is that if I fill the Double Buffer with ,for example, green, and then plot a few pixels of an other color into the double buffer, I will see those pixels for an instan and then the whole screen will be green. > As regards to the assembler thing, you sould not need to create or reload > any selectors. Since the contents of memory SHOULD be mapped to one > selector with a big limit, ds,es,fs,gs should be the same... Simply write > to the (linear offset of buffer)+compiler base address to get your pixels > there. thanks Thanks for responding Jordan Swanson