From: Erik Max Francis Newsgroups: comp.os.msdos.djgpp Subject: Re: Standards Date: Fri, 10 Oct 1997 10:01:53 -0700 Organization: Alcyone Systems Lines: 24 Message-ID: <343E5F81.2D7B8BD0@alcyone.com> References: NNTP-Posting-Host: newton.alcyone.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Precedence: bulk Kevin A. Pieckiel wrote: > Where can I get stuff like that? I'm pretty sure it's not in an RFC > as I > browse those pretty regularly. Anyone know right off hand where I can > find references similar to RFC's that have ANSI and IEEE standards? You have to buy the ANSI standard direct from ANSI. I'm no sure about IEEE, but I imagine it's much the same way. If you're specifically interested in the ANSI C standard, you can look into _The annotated ANSI C standard_ by Herbert Schildt (ISBN 0078819520). Schildt's annotation should be ignored, because they are in some cases dead wrong, but the standard is reproduced almost in its entirety -- and it costs less than if you were to get it from ANSI itself. -- Erik Max Francis, &tSftDotIotE / mailto:max AT alcyone DOT com Alcyone Systems / http://newton.alcyone.com/ San Jose, California, United States / icbm://+37.20.07/-121.53.38 \ "After each war there is a little / less democracy to save." / Brooks Atkinson