From: Robert Hoehne Newsgroups: comp.os.msdos.djgpp Subject: Re: Redefine Alt-F keys Date: Thu, 22 May 1997 12:33:36 +0200 Organization: TU Chemnitz-Zwickau Lines: 37 Message-ID: <33842100.5F19DE04@Mathematik.tu-chemnitz.de> References: NNTP-Posting-Host: pandora.hrz.tu-chemnitz.de Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Precedence: bulk Eric Gillespie wrote: > > I'm making an inquiry for a friend of mine who runs Linux, and is running > the latest (I think) version of RHIDE. He asks : The latest version is 1.2c > > Is there a way to re-map the Alt-F1 - Alt-F10 keys in RHIDE to something > else? Unfortunately these conflict with virtual terminal switching. If you are running on the console, then you can use inside RHIDE all the Alt+ function keys for RHIDE. To switch to an other console you can use Ctr+ALt+F?. This is similar to using the console switching when you run X. > Also, is there ANY way to get RHIDE 1.2c running for DJGPP 2.0? I do not plan this. Normally it works also with DJGPP 2.0, except when you are using commandlines longer than 126 characters. > but at the moment it will not compile (the error is: > no input files > which sounds like the old commandline problem...). So I can edit, but not This is probably not a commandline but an other problem for you. You should describe it a little bit more (other users had also sometimes a similar problem). Do you working with a project file or not? If not working with a project, which files do have opened on the desktop when you try to compile? Robert -- ***************************************************************** * Robert Hoehne, Fakultaet fuer Mathematik, TU-Chemnitz-Zwickau * * Post: Am Berg 3, D-09573 Dittmannsdorf * * e-Mail: Robert DOT Hoehne AT Mathematik DOT TU-Chemnitz DOT DE * * WWW: http://www.tu-chemnitz.de/~rho * *****************************************************************