From: jb3207 AT eclipse DOT co DOT uk (Jason Barstow)
Newsgroups: comp.os.msdos.djgpp
Subject: Re: 'uclock_t x[1]' crashes VBE_detect()
Date: Sun, 18 May 1997 11:41:16 GMT
Organization: Jabber Interactive
Reply-To: jb3207 AT eclipse DOT co DOT uk
References: <1 DOT 5 DOT 4 DOT 32 DOT 19970516145414 DOT 002ededc AT ubeclu DOT unibe DOT ch>
NNTP-Posting-Host: p13.dione.eclipse.co.uk
Message-ID: <337eeae0.0@ispc-news.cableinet.net>
Lines: 21
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Precedence: bulk

Roger Noss <noss AT pupk DOT unibe DOT ch> wrote:
>By the way, I had to get svgakt62.zip from SciTech's site
>(it's free but hard to find) to make the SVGA stuff work.
>Even so, I could not use the makefile because the SciTech
>makefile definitions package must be installed, and I could
>not find it.  Is it free too, or has anyone managed to 'make'
>without it?

I hacked this for DJGPP. Sorry but it's all tied together with
other code now so I can't give you a DJsvgakt or somesuch.

If memory serves me correctly most of the code just sets
up a virtual protmode environment (i.e. stuff that works
across Watcom, MS, BC etc). I cut all the non-djgpp stuff
and replaced any int(3)86 stuff with djgpp equivalent functions.

This was the *first* thing I attempted with DJGPP so it couldn't
have been that difficult ;)