From: cpw10 AT columbia DOT edu (Chester Wong) Newsgroups: comp.os.msdos.djgpp Subject: Re: RHIDE and WinNT 4.0 Date: Tue, 18 Mar 1997 06:19:56 GMT Organization: Columbia University Lines: 36 Message-ID: <332e3358.4696162@news.cc.columbia.edu> References: <332a234c DOT 14141844 AT news DOT cc DOT columbia DOT edu> <332D3332 DOT 2902 AT Mathematik DOT tu-chemnitz DOT de> NNTP-Posting-Host: dialup-8-11.cc.columbia.edu Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: djgpp AT delorie DOT com DJ-Gateway: from newsgroup comp.os.msdos.djgpp Hi. Thanks for the tip. However, I'm still unable to get mouse support in RHIDE with the new version. Perhaps you can enlighten me: in a command prompt window, I type "rhide -M". The hard drive goes, and then nothing happens. If I type "rhide -M" again, then the program loads. This happened in the older version as well. Any ideas as to what is happening? With this peculiar behavior, I cannot create a .pif file that will run RHIDE with mouse drivers, etc. Thanks for the help. Also, if anyone out there has been able to get RHIDE 1.2 to work under WinNT 4.0, please e-mail me your help.. TIA, Chester On Mon, 17 Mar 1997 13:04:02 +0100, Robert Hoehne wrote: >Chester Wong wrote: >> >> Hi. Has anyone been able to get RHIDE to use the mouse in a DOS session >> under WinNT 4.0? Thanks. > >The newest RHIDE version 1.2 (from today) has a new commandline >switch '-M'. This switch must used when running under NT. > >You can download the newest version from website or wait some >days, until it is updated on all simtelnet mirrors. > >Robert >-- >***************************************************************** >* Robert Hoehne, Fakultaet fuer Mathematik, TU-Chemnitz-Zwickau * >* Post: Am Berg 3, D-09573 Dittmannsdorf * >* e-Mail: Robert DOT Hoehne AT Mathematik DOT TU-Chemnitz DOT DE * >* WWW: http://www.tu-chemnitz.de/~rho * >*****************************************************************