From: Robert Hoehne <Robert DOT Hoehne AT Mathematik DOT tu-chemnitz DOT de>
Newsgroups: gnu.gcc.help,comp.os.msdos.djgpp
Subject: Re: How do you uncompress and install DJGPP binutils 2.7 ?
Date: Fri, 20 Dec 1996 12:48:53 +0100
Organization: TU Chemnitz-Zwickau
Lines: 26
Message-ID: <32BA7D25.2E90@Mathematik.tu-chemnitz.de>
References: <32B9E0C9 DOT 4A64 AT ot DOT com>
NNTP-Posting-Host: daemon.hrz.tu-chemnitz.de
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: zionhill AT ot DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

ZionHill wrote:
> 
> I downloaded the binutils.gz for vs. 2.7 from delorie.com.
I haven't the time to check DJ's complete ftp-site, but I can't
imagine, that there is a 'binutils.gz' file. May be you got
the '.gz'-file from a GNU-site but this is even worst,
because you will NOT be able to compile it for DJGPP in a simple
way.

The port for the binutils 2.7 to DJGPP is already done and is
available as a compiled binary archive and a archive with the
sources which includes all the neccessary changes to compile
under and for DJGPP.

These two archives can be found on any SimtelNet mirrors
in
/pub/simtelnet/gnu/djgpp/v2gnu
 
Robert
-- 
*****************************************************************
* Robert Hoehne, Fakultaet fuer Mathematik, TU-Chemnitz-Zwickau *
* Post:    Am Berg 3, D-09573 Dittmannsdorf                     *
* e-Mail:  Robert DOT Hoehne AT Mathematik DOT TU-Chemnitz DOT DE              *
* WWW:     http://www.tu-chemnitz.de/~rho                       *
*****************************************************************