From: karuottu AT freenet DOT hut DOT fi (Kai Ruottu)
Newsgroups: gnu.gcc.help,comp.os.msdos.djgpp
Subject: Re: M68000 libgcc library
Date: Sat, 07 Dec 1996 03:24:54 GMT
Organization: Freenet Finland
Lines: 30
Message-ID: <58aksl$kg6@learnet.freenet.hut.fi>
References: <32A29685 DOT 498E AT info DOT vub DOT ac DOT be>
NNTP-Posting-Host: plus-11-4.dial.inet.fi
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

Geert Goossens <gagoosse AT info DOT vub DOT ac DOT be> wrote:

>Hi,

>I have used the m68k.zip I found somewhere on the Internet to make a
>DOS->M68000 cross-compiler. The problem is that the included libgcc.a
>library (used for divisions, multiplications and so on), is made for
>a 68020 and not for a 68000. Does anyone know how and where to get
>a libgcc.a for the 68000?

 The complete libs were missing first (the linker scripts too...),
but should be available at ftp.lysator.liu.se/pub/msdos/gcc-dos-m68k.

If not, there is a problem... Anyhow, a lot of people have made the
m68k-coff target compiler to work under Linux, Win32, DOS or some
Unix-workstation and also built the Cygnus newlib for m68k-coff... The
libgcc.a's for m68000/msoft-float ... m68020/6888x generated when
building the compiler are independent of the host... So, anyone of the
m68k-coff target compilers (version 2.7.2) will have the right
libgcc.a's...

 If you cannot find the complete libs, mail me...  As the provider of
the DOS-hosted-gcc-m68k, I have this stuff available and can mail it
to you...
 
Kai Ruottu, MScEng      | HAL = Step forwards from IBM hardware. This is OK, but
kar AT akk DOT llaky DOT fi        | WNT = Step backwards from VMS, if using the same logic, 
karuottu AT freenet DOT hut DOT fi | ULR = Step forward from VMS, could be a better name, and  
                        |       "Unix's Last Rival" would tell what it is...