From: "John M. Aldrich" <fighteer AT cs DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: Still having compiler problems
Date: Thu, 10 Oct 1996 00:22:20 -0700
Organization: Three pounds of chaos and a pinch of salt
Lines: 26
Message-ID: <325CA42C.1302@cs.com>
References: <1996Oct9 DOT 165343 DOT 147552 AT forest>
Reply-To: fighteer AT cs DOT com
NNTP-Posting-Host: ppp103.cs.com
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To: ebromber AT forest DOT drew DOT edu
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

ebromber AT forest DOT drew DOT edu wrote:
> 
> I recently unzipped all the necessary files and make the necessary changes
> to my autoexec.bat file. Then I went I read the FAQ and did all that
> applied. But when I go to compile my programs, I still get the message
> saying it can't find header files. What do I do now?

A copy of the errors might be nice.  Also a fragment from your program
(specifically the lines containing the #include directives).  :)

Also, are you trying to compile C or C++?  If C++, make sure that you
are naming your programs '.cc' or '.cpp',  not '.C', which can cause
some problems.  Also make sure that you got the C++ files, not just the
C ones (see 'readme.1st').

In any case, please follow the FAQ guidelines in chapter 6.12 to create
a full report of your system's environment and configuration.  At least
post your CONFIG.SYS, AUTOEXEC.BAT, and your environment as reported by
'set'.

-- 
---------------------------------------------------------------------
| John M. Aldrich, aka Fighteer I |        fighteer AT cs DOT com          |
| Proud owner of what might one   |   http://www.cs.com/fighteer    |
| day be a spectacular MUD...     | Plan: To make Bill Gates suffer |
---------------------------------------------------------------------