Xref: news2.mv.net comp.os.msdos.djgpp:3666
Newsgroups: comp.os.msdos.djgpp
From: Pieter Kunst <kunst AT natlab DOT research DOT philips DOT com>
Subject: Re: VESA 2.0 docs (was GRX2.0 Docs)
Sender: news AT natlab DOT research DOT philips DOT com (USENET News System)
Message-ID: <3192F654.3A4F@natlab.research.philips.com>
Date: Fri, 10 May 1996 07:55:00 GMT
To: nicolas AT dsys DOT ceng DOT cea DOT fr
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
References: <4ms4k3$8jv AT news DOT cea DOT fr>
Mime-Version: 1.0
Organization: Philips Research Laboratories, Eindhoven, NL
Lines: 11
DJ-Gateway: from newsgroup comp.os.msdos.djgpp

Eric NICOLAS wrote:
> 
> : Or you could just use VESA. The VESA 1.x standard is a lot slower than a
> : hardware level driver, because it requires a switch to real mode every
> : time I change banks, but VESA 2.0 avoids that. Even if your card doesn't
> : support the linear framebuffer modes, VESA 2.0 is as fast as native code.
> 
> OK, but where can I find documentation for VESA 2.0 ??
> 

www.vesa.org