MIME-Version: 1.0
From: andyburgess <AndyBurgess AT argonet DOT co DOT uk>
To: cygwin AT cygwin DOT com
Date: Mon, 23 Jan 2006 13:28:24 +0000 (GMT)
Subject: Serial port hangs unless I run Hyperterminal?
Message-ID: <4dedbe8ed5AndyBurgess@argonet.co.uk>
User-Agent: Pluto/3.03h (RISC-OS/4.02) POPstar/2.06-ds.3
Content-Type: text/plain
Mailing-List: contact cygwin-help AT cygwin DOT com; run by ezmlm
Sender: cygwin-owner AT cygwin DOT com
Mail-Followup-To: cygwin AT cygwin DOT com

Cygwin1.dll - version 1005.18.0.0 (Build date 2005-07-02 20:30)

Hi there,

I've been using the superb Cygwin environment for a few months now and am
very impressed with it!

I'm getting an issue when I run my GNU C program.  It's hanging on the
write/read operation to a GSM modem attached to my COM1 *when* the PC has
initially been switched on from cold. However the crazy thing is if I run
Hyperterminal after boot-up, fire a couole of commands to the modem and close
Hyperterminal down, my program subsequently runs perfectly! In the program,
I've avoided setting anything on the modem (no tcsetattr) - except the O_RDWR
and O_NOCTTY on opening the port.

Can anyone tell me why it hangs? I saw that this was a problem
previously,(read()) but I assume it's been fixed now - as it works later! My
Hyperterminal settings are baud 19200, 8 data bits, no parity and hardware
flow control. I've noticed the following:

Prior to running Hyperterminal, my DOS port settings are:

MODE COM1: BAUD=1200 PARITY=n DATA=7 STOP=1 to=off xon=off odsr=off octs=off
dtr=on rts=on idsr=off

After hyperterminal they are:

MODE COM1: BAUD=19200 PARITY=n DATA=8 STOP=1 to=on xon=off odsr=off octs=on
dtr=on rts=hs idsr=off

I've tried setting the settings in a DOS batch program outside of
Hyperterminal, but it's no good. My program won't respond, unless I've run
Hyperterminal! What is the software setting that Hyperterminal uses that my C
program needs?

Also I've been having trouble with the tcsetattr and tcgetattr functions in C
(my program's not using them currently). Each time I call them - I get a
returned -1 - error status.


Cheers
Andy Burgess

-- 
 __  __  __  __      __ ___   _____________________________________________
|__||__)/ __/  \|\ ||_   |   /
|  ||  \\__/\__/| \||__  |  /...Internet access for all Acorn RISC machines
___________________________/ andyburgess AT argonet DOT co DOT uk

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/