Mailing-List: contact cygwin-help AT cygwin DOT com; run by ezmlm List-Subscribe: List-Archive: List-Post: List-Help: , Sender: cygwin-owner AT cygwin DOT com Mail-Followup-To: cygwin AT cygwin DOT com Delivered-To: mailing list cygwin AT cygwin DOT com From: "Martin" To: Subject: com* vs /dev/ttyS* Date: Wed, 31 Mar 2004 13:06:27 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: X-IsSubscribed: yes Greetings I am having trouble using the com1 port through Cygwin. I know this have been posted earlier, but I havn't found a solution. I am using GDB to communicate with an ARM7 evaluation board. I use the command "tar rdi com1" to use com1 as communication port, whereafter the system hangs. I've also tried /dev/ttyS0 and /dev/com1 which returns "Could not open device "/dev/com1". Any ideas? Regards Martin Siegumfeldt -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://cygwin.com/docs.html FAQ: http://cygwin.com/faq/