Mailing-List: contact cygwin-help AT sourceware DOT cygnus DOT com; run by ezmlm List-Subscribe: List-Archive: List-Post: List-Help: , Sender: cygwin-owner AT sourceware DOT cygnus DOT com Delivered-To: mailing list cygwin AT sourceware DOT cygnus DOT com Message-ID: <38A04FA8.C9953192@openmarket.com> Date: Tue, 08 Feb 2000 12:17:28 -0500 From: "Guy T. Moore Jr." Organization: Engineering X-Mailer: Mozilla 4.61 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: "Masterson, David" CC: cygwin AT sourceware DOT cygnus DOT com Subject: Re: clearmake and cywin b20 and \r\n on NT References: <6F39FC4301CED31196240060B0571831038026 AT milxpr09 DOT kla-tencor DOT com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Using the 'make' that is supplied with the Cygwin installation works fine. clearmake works fine also if I do not set the SHELL variable in the makefile. i.e.: using the standard DOS shell rather than the sh.exe that is supplied with Cygnus. ALthough commands like 'pwd' are not understood by the DOS shell, etc... "Masterson, David" wrote: > > Have you tried the same thing using straight GNU make? I'm not suggesting > you switch to GNU make rather merely run a test with GNU make to see if it > has the same problem... > > -----Original Message----- > From: Guy T. Moore Jr. [mailto:gmoore AT openmarket DOT com] > Sent: Monday, February 07, 2000 1:29 PM > To: cygwin AT sourceware DOT cygnus DOT com > Subject: Re: clearmake and cywin b20 and \r\n on NT > > > Actually, it looks like a "\r\n" line ending problem to me. It's probably > trying > > to run "\r" as a program. > > Actually, after saving the output and doing an octal dump of it,it > is trying to run "pwd\r" as a program. The correct error message is: > > pwd\r : not found > > I definitely do not have any \r in my makefile. > Seems like clearmake is adding that in whether or not my lines in \r or \r\n > > I am going back to CLearCase support with this info. > > Chris Faylor wrote: > > > > On Mon, Feb 07, 2000 at 12:30:46PM -0800, Earnie Boyd wrote: > > >--- "Guy T. Moore Jr." wrote: > > >> > > >> What was the exact answer to using Clearmake and Cygwin b20 > > >> on the WinNT platform? > > >> > > >> I just tried: > > >> CYGWIN=nobinmode > > >> but that did not help running clearmake. > > >> > > >> I still get, > > >> : not found > > >> > > > > > >This is definately a message coming from the ash port. I see it most > commonly > > >when some command can't be executed via sh when trying to use it from a > > >non-Cygwin program. Is Clearmake OpenSource? Can you rebuild it using > Cygwin? > > >Rebuilding with Cygwin would be the best solution. If you can't do that, > try: > > > > > >cp sh.exe ash.exe > > >cp bash.exe sh.exe > > > > > >This will give you a different message that may help determine the real > problem > > >which I suspect to be pathing issues related to Cygwin vs non-Cygwin > paths. > > > > Actually, it looks like a "\r\n" line ending problem to me. It's probably > trying > > to run "\r" as a program. > > > > cgf -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe AT sourceware DOT cygnus DOT com