Mail Archives: opendos/2010/01/31/21:13:50
It may be a bit late, but ...
As far as I can remember, M$-DOS 6.22 config works
pretty much the same as M$-DOS 7.10 config, per below.
Basically, CONFIG.SYS is where it all starts. Here's an example :
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
REM Available ROM space on this machine : E000-EEFF??? =
(Unused/Auto-detected)
REM Also mapped over : B000-B7FF (MDA video address space) :
device=3Dc:\windows\himem.sys
device=3Dc:\windows\emm386.exe ram i=3Db000-b7ff
DOS=3DHIGH,UMB
BREAK=3DON
COUNTRY=3D061,,C:\WINDOWS\COMMAND\COUNTRY.SYS
BUFFERS=3D30
FILES=3D45
LASTDRIVE=3DZ
FCBS=3D16,16
rem STACKS=3D9,256
[MENU]
MENUITEM =3D STANDARD, Standard DOS Configuration
MENUITEM =3D WINDOZE, Standard Windoze Configuration
MENUITEM =3D DOS_USB, DOS with USB support (Cannot use Windoze)
MENUDEFAULT =3D WINDOZE, 5
[DOS_USB]
REM - Panasonic's universal USB-controller driver (formerly Novac)
device=3DC:\ASPI_USB.DRV\PANASONC\USBASPI.SYS /v /w
REM - Adaptec's ASPI disk driver (supports partition table)
device=3Dc:\ASPI_USB.DRV\Adaptec\aspidisk.sys
[WINDOZE]
[STANDARD]
[COMMON]
DEVICEHIGH C:\WINDOWS\SETVER.EXE
DEVICEHIGH C:\WINDOWS\COMMAND\ANSI.SYS
DEVICEHIGH C:\CD_DRV\LITE-ON\CDROM.SYS /D:ATAPI001
rem ? devicehigh C:\net\ifshlp.sys
SHELL=3DC:\COMMAND.COM C:\ /E:512 /P
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Now, you have the option of specifying an alternative
to AUTOEXEC.BAT via the SHELL command. I presume you
can have an individual SHELL command for the individual
configuration sections, rather than the above, which
has a common SHELL command.
Details from the M$-DOS 7.10 help are as follows :
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
/K command
Runs the specified command, program, or batch program and then =
displays
the MS-DOS command prompt. This switch must be the last switch on =
the
COMMAND command line.
This switch is particularly useful for specifying a startup batch =
file
for the MS-DOS Prompt in Windows (much like AUTOEXEC.BAT for =
MS-DOS). To
do this, open the DOSPRMPT.PIF file using the PIF Editor, and type =
the
/K switch in the Optional Parameters box. It is not recommended to =
use
the /K switch on the SHELL command line in your CONFIG.SYS file; =
doing
so can cause problems with applications and installation programs =
that
make changes to your AUTOEXEC.BAT file.
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Alternatively, you can check for the chosen config in
AUTOEXEC.BAT (which is what I do) using commands like :
if $%CONFIG%=3D=3D$DOS_USB goto nongui
if $%CONFIG%=3D=3D$STANDARD goto nongui
BTW, the M$-DOS 7.xx help is found on the Windoze 9X
CD in the "\tools\oldmsdos" directory.
Joe.
>=20
Joe da Silva
Senior Electronic Engineer
Landis+Gyr
Phone: +61 2 9690 7309
joe DOT dasilva AT landisgyr DOT com
http://www.landisgyr.com/
Manage Energy Better
-----Original Message-----
> From: Kevin Klement [mailto:ccoky AT iglou DOT com]
> Sent: Wednesday, September 30, 2009 8:16 AM
> To: opendos AT delorie DOT com
> Subject: Two configs
>=20
>=20
> Originally to: All
>=20
> Hi All,
>=20
> Is anyone running <Multi-Config> option with MS-DOS 6.22?
>=20
> If so any tips on how to setup these two startup's?
>=20
> [SET 1]
> autoexec.bat
> :
> : =D6=B7 =D2=B7 =D2=B7 =D6=B7 Sysop: Kevin =
J Klement
> : =BA =BA=BA =BA=BA =BA
> : =BA=D2 =B7=D2 =D2=B7 =D6=B7 =B7=D2 =C7=B6 =C7=B6 =D3=B7
> : =BA=BA =BA=BA =BA=BA =D3=B7 =BA=BA =BA=BA =BA=BA =BA
> : =D3=BD =D3=B6 =C7=BD =D3=BD =D3=B6 =D0=BD =D0=BD =D3=BD
> : =D6=BA =BA =D6=BA
> : =D3=BD =D0 =D3=BD Modified: 08/25/09 04:08 pm
> : Microsoft Network Client version=20
> 3.11 for MS-DOS
> :
> @echo off
> path c:\lanman.net;c:\qemm;c:\dos;c:\util;c:\batch;c:\max;c:\seal_386;
> writelog System rebooted ... >> c:\reboot.log
> :
> : Start the Network:
> :
> c:\qemm\loadhi /r:0 /lo c:\lanman.net\net initialize
> c:\lanman.net\netbind.com
> c:\qemm\loadhi /r:4 /lo c:\lanman.net\umb.com
> c:\qemm\loadhi /r:2 /lo c:\lanman.net\tcptsr.exe
> c:\qemm\loadhi /r:4 /lo c:\lanman.net\tinyrfc.exe
> c:\lanman.net\nmtsr.exe
> c:\qemm\loadhi /r:4 /lo c:\lanman.net\emsbfr.exe
> :
> : TSR's:
> :
> c:\qemm\loadhi /r:1 c:\cddriver\MSCDEX.EXE /D:oemcd001 /L:D
> c:\qemm\loadhi /r:2 c:\util\helphand.com
> c:\qemm\loadhi /r:2 /res=3D832 /sqf c:\util\clock.com
> c:\hyper\hyperdkx.exe /C:2048 /V /H
> be sa bright white
> cls
> echo Loading Microsoft Network Client for MS-DOS
> echo.
> echo Please Wait...
> net logon humaniod xxxxxx /domain:gypsynet /yes /savepw:yes
> net time \\gypsy-designs /set /yes
> :
> : Environment:
> :
> prompt $p$g
> set temp=3Dc:\dos
> set comspec=3Dc:\command.com
> set maximus=3Dc:\max\max.prm
> set shezcfg=3Dc:\util\shez.cfg
> set TZ=3DMST7MDT
> : set TZ=3DMST7
> : set TWNODE=3D1
>=20
> CALL c:\batch\binkley.bat
>=20
> config.sys:
>=20
> DEVICE=3DC:\QEMM\QEMM386.SYS R:4 RAM
> FILES=3D20
> DOS=3DUMB
> LASTDRIVE=3DZ
> FCBS=3D3,0
> STACKS=3D0,0
> DOS=3DHIGH
> DEVICE=3DC:\QEMM\LOADHI.SYS /R:1 C:\DOS\ANSI.SYS
> DEVICE=3DC:\QEMM\LOADHI.SYS /R:2 C:\DOS\SETVER.EXE
> DEVICE=3DC:\QEMM\LOADHI.SYS /R:2 C:\CDDRIVER\OAKCDROM.SYS /D:OEMCD001
> DEVICE=3DC:\UTIL\BNU.SYS /L0=3D38400 /Z0 /F+
> DEVICE=3Dc:\qemm\loadhi.sys /r:3 /res=3D3968 /sqt=3Ded00-edff
> C:\lanman.net\IFSHLP.SYS
> rem DEVICE=3DC:\UTIL\X00.SYS E 1 B,0,115200 FIFO=3D8 T=3D4096 R=3D8192
>=20
> [END SET 1]
>=20
> [SET 2]
> autoexec.bat
> :
> :
> :
> :
> : =D6=B7 =D2=B7 =D2=B7 =D6=B7 Sysop: Kevin =
J Klement
> : =BA =BA=BA =BA=BA =BA
> : =BA=D2 =B7=D2 =D2=B7 =D6=B7 =B7=D2 =C7=B6 =C7=B6 =D3=B7
> : =BA=BA =BA=BA =BA=BA =D3=B7 =BA=BA =BA=BA =BA=BA =BA
> : =D3=BD =D3=B6 =C7=BD =D3=BD =D3=B6 =D0=BD =D0=BD =D3=BD
> : =D6=BA =BA =D6=BA
> : =D3=BD =D0 =D3=BD modified: 03/11/09 05:12 pm
> @echo off
> path c:\dos;c:\util;c:\batch;c:\max;c:\seal_386;
> writelog System rebooted ... >> c:\reboot.log
> :
> c:\util\helphand.com
> :
> : Environment:
> :
> prompt $p$g
> set temp=3Dc:\dos
> set comspec=3Dc:\command.com
> set TZ=3DMST7MDT
> : set TZ=3DMST7
>=20
> config.sys:
>=20
> DEVICE=3DC:\DOS\HIMEM.SYS
> DEVICE=3DC:\DOS\EMM386.EXE RAM
> BUFFERS=3D30,0
> FILES=3D50
> DOS=3DUMB
> LASTDRIVE=3DZ
> FCBS=3D4,0
> STACKS=3D0,0
> DOS=3DHIGH
> DEVICE=3DC:\DOS\SETVER.EXE
> DEVICE=3DC:\DOS\ANSI.SYS
>=20
> [END SET 2]
>=20
>=20
> Kevin
>=20
>=20
>=20
>=20
>=20
PLEASE CONSIDER OUR ENVIRONMENT BEFORE PRINTING THIS EMAIL.
This e-mail (including any attachments) is confidential and may be =
legally privileged. If you are not an intended recipient or an =
authorized representative of an intended recipient, you are prohibited =
from using, copying or distributing the information in this e-mail or =
its attachments. If you have received this e-mail in error, please =
notify the sender immediately by return e-mail and delete all copies of =
this message and any attachments. Thank you.
- Raw text -