Message-ID:	<009c01c108cb$e197f4a0$c408e289@mpaul>
From:	"Matthias Paul" <Matthias DOT Paul AT post DOT rwth-aachen DOT de>
To:	<opendos AT delorie DOT com>
References:	<001e01c10811$07ce6e80$80de4c18 AT cr140962a>
Subject:	Re: L_disk
Date:	Mon, 9 Jul 2001 15:49:06 +0200
Organization:	University of Technology, RWTH Aachen, Germany
MIME-Version:	1.0
X-Priority:	3
X-MSMail-Priority:	Normal
X-Mailer:	Microsoft Outlook Express 5.50.4522.1200
X-MIMEOLE:	Produced By Microsoft MimeOLE V5.50.4522.1200
X-MIME-Autoconverted:	from quoted-printable to 8bit by delorie.com id TAA29583
Reply-To:	opendos AT delorie DOT com

On 2001-07-09, Fergus Hayman wrote:

> I't would be nice to be able to Xtransfer files with Laplink
> or something __won't have to keep zipping floppies for ever.
> I have a Parallel cable male to male that should work.

DR-DOS comes with FILELINK, that will do the job, but is
not very fast. If you can get hold of Sewell´s FASTLYNX (FX)
from somewhere, try this instead, it is easier to set up
and very fast.
Alternatively, you can also using the Link facility of
the Norton Commander (NC) or the DOS Navigator (DN) 
(Also I had problems to set up the later there are reports
that it works).

Regarding the 510 Mb BIOS limitation: Get OnTrack´s DiskManager
or one of the OEM products. At least as long as the other
OSes use the BIOS to access the disk (as DOS does), this is
compatible with other non-DOS OSes and also with multi-boot
utiities that install into the MBR (you must install them in
the "virtual MBR" provided by DiskManager, not the physical
MBR). OSes that bypass the BIOS to access the disk are
incompatible with DiskManager, so BSD will probably
not work.

Greetings,

 Matthias

PS. Please disable HTML when posting into this group.
HTML is not recognized by many emailers, adds no extra
value to the info, but more than doubles the transfer
volume and thereby the costs for everyone. Also,
HTML posts increase the risk for email viruses.
In order to correctly set up Outlook Express 5.50 you
can go to Extras->Options->Send, and select "text-only"
instead of "HTML" for email *and* newsgroup posts.
It is also wise to uncheck the option "Send reply in
the same format as original".

-- 

Matthias Paul, Ubierstrasse 28, D-50321 Bruehl, Germany
<mailto:Matthias DOT Paul AT post DOT rwth-aachen DOT de>; <mailto:mpaul AT drdos DOT org>
http://www.uni-bonn.de/~uzs180/mpdokeng.html; http://mpaul.drdos.org

- Raw text -