From:	jdashiel AT eagle1 DOT eaglenet DOT com
Date:	Mon, 24 Feb 1997 22:03:08 -0500 (EST)
To:	opendos AT mail DOT tacoma DOT net
Subject:	[opendos] narrowing it down for provox
Message-Id:	<Pine.NXT.3.95.970224215745.2396A-100000@eagle1>
Mime-Version:	1.0
Sender:	owner-opendos AT mail DOT tacoma DOT net

I have one part of provox loading in config.sys and
the part that's supposed to run it loading in the first line of
autoexec.bat.
The config.sys load goes fine and it continues to blow up on invocation.
Interestingly, emm386.exe is cleared of culpability since the
blow up happens whether emm386.exe is used or not.
The line that loads provox device driver is:
device=c:\provox\provox.exe

Here's the hard drive opendos config.sys file.
I'll send the others when I can get them together.

device=c:\provox\provox.exe
REM device=c:\opendos\emm386.exe dpmi=Off frame=None
DEVICE=C:\OPENDOS\DPMS.EXE
DEVICE = RCD.SYS /F
REM device=c:\dos\himem.sys
REM device=c:\dos\emm386.exe noems
DOS=HIGH,UMB
FILES=40
BUFFERS=20
BREAK=ON
LASTDRIVE=H
installhigh=c:\dos\fastopen.exe c:=100 d:=100 e:=100 f:=100 -x
SHELL=C:\COMMAND.COM C:\ /E:5632 /P
DEVICEHIGH=C:\OPENDOS\ANSI.SYS
DEVICEHIGH /L:1,5888 =C:\DOS\RAMDRIVE.SYS 1024 /E
device=c:\fprot\virstop.exe /disk:e:
DEVICE=C:\OPENDOS\SETVER.EXE
FCBS=4,4
HISTORY=ON,512,ON
rem DEVICE=C:\PLUGPLAY\DRIVERS\DOS\DWCFGMG.SYS
DEVICE=C:\CTCM\CTCM.EXE
COUNTRY=1,,C:\OPENDOS\COUNTRY.SYS
set temp=g:\
set qcron=c:\qcron\
set tmp=c:\tmp
set yarn=c:\yarn
set home=c:\home
set tz=est5edt
set describe=c:\jov
set joverc=c:\jove\jove.rc
set term=ansi
set djgpp=c:/djgpp/djgpp.env
set artrsn=174514743
set pktmp=f:\
REM set comspec=c:\command.com
set commo=c:\commo
set BLASTER=A240 I5 D1 H5 P330 T6
set MIDI=SYNTH:1 MAP:E
set pcelm=c:\pcelm
set less=-cm





jude <jdashiel AT eagle1 DOT eaglenet DOT com>

- Raw text -