X-Authentication-Warning:	delorie.com: mail set sender to geda-help-bounces using -f
X-Recipient:	geda-help AT delorie DOT com
X-SourceIP:	95.97.163.245
X-Authenticated-Sender:	b DOT mykendevelopment AT upcmail DOT nl
Message-ID:	<55B606D7.7090605@iae.nl>
Date:	Mon, 27 Jul 2015 12:24:23 +0200
From:	myken <myken AT iae DOT nl>
User-Agent:	Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
MIME-Version:	1.0
To:	geda-help AT delorie DOT com
Subject:	Re: [geda-help] Strategy of adding netname attributes in gSchem?
References:	<CAONhAosa8509VEWHQ_BUFp5iu9RA_65m8EzfZ-YMqDMJMpNZAw AT mail DOT gmail DOT com>
In-Reply-To:	<CAONhAosa8509VEWHQ_BUFp5iu9RA_65m8EzfZ-YMqDMJMpNZAw@mail.gmail.com>
Reply-To:	geda-help AT delorie DOT com

Hello,

Please take an other look at your schematics.
All nets with the same name will be tied together. Looking at your 
schematic I see two nets with the name C and two nets with the name Q 
that probably shouldn't be connected to each-other.
So net C connected to pin 1 of U1 will be short-circuit to net C 
connected to pin 3 of U1, is that what you want?

Cheers Robert.

On 27/07/15 10:50, Csányi Pál (csanyipal AT gmail DOT com) [via 
geda-help AT delorie DOT com] wrote:
> Hello,
>
> I'm working on my little mosquito repellent project.
> So far I have the schematic completed ( see attachment ).
> What did I furter to get the pcb?
>
> I create a new empty pcb with pcb application.
> After that I run gsch2pcb on project file:
> gsch2pcb tervezet
>
> ----------------------------------
> Done processing.  Work performed:
> 9 file elements and 0 m4 elements added to
> KornyezetKimeloSzunyogRiaszto.new.pcb.
>
> Next steps:
> 1.  Run pcb on your file KornyezetKimeloSzunyogRiaszto.pcb.
> 2.  From within PCB, select "File -> Load layout data to paste buffer"
>      and select KornyezetKimeloSzunyogRiaszto.new.pcb to load the new
> footprints into your existing layout.
> 3.  From within PCB, select "File -> Load netlist file" and select
>      KornyezetKimeloSzunyogRiaszto.net to load the updated netlist.
>
> 4.  From within PCB, enter
>
>             :ExecuteFile(KornyezetKimeloSzunyogRiaszto.cmd)
>
>      to update the pin names of all footprints.
>
> But what I did is far from perfect; the resulted ratnest's are wrong.
>
> So what is the preferred way  - or strategy - to set up netnames so so
> one can get proper pcb layout at the and?
>

- Raw text -