Message-ID:	<3E2C5DDE.7B15C6A9@worldnet.att.net>
From:	Paul Cousoulis <paulcsouls AT worldnet DOT att DOT net>
X-Mailer:	Mozilla 4.78 [en] (Win95; U)
X-Accept-Language:	en
MIME-Version:	1.0
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: DMA and DJGPP
References:	<3E298416 DOT 3A565C4C AT worldnet DOT att DOT net>
Lines:	16
Date:	Mon, 20 Jan 2003 20:39:57 GMT
NNTP-Posting-Host:	12.81.87.54
X-Complaints-To:	abuse AT worldnet DOT att DOT net
X-Trace:	bgtnsc05-news.ops.worldnet.att.net 1043095197 12.81.87.54 (Mon, 20 Jan 2003 20:39:57 GMT)
NNTP-Posting-Date:	Mon, 20 Jan 2003 20:39:57 GMT
Organization:	AT&T Worldnet
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

To complete the thread, I found the registers in the PLX for the address
and transfer size. I don't know how I missed them. So you up the address
and the buffer in the program and load them into the registers and your
off programming. No DMA controller needed.

Paul

Paul Cousoulis wrote:
> 
> I'm building a data aquisition board that uses a PLX PCI chip to
> communicate with the PCI bus. I need to set it up to use DMA to transfer
> the data. I how to do I find the address and set up the memory in DJGPP
> to get at the data?
> 
> Thanks
> Paul

- Raw text -