From:	"Betelgeuse" <iam@[removethis]cadvision.com>
Newsgroups:	comp.os.msdos.djgpp
References:	<000c01bff203$3c8d9a80$a41bfea9 AT we DOT mediaone DOT net>
Subject:	Re: DJGPP Compiler
Date:	Thu, 20 Jul 2000 17:55:15 -0700
Lines:	58
X-Priority:	3
X-MSMail-Priority:	Normal
X-Newsreader:	Microsoft Outlook Express 5.50.4133.2400
X-MimeOLE:	Produced By Microsoft MimeOLE V5.50.4133.2400
NNTP-Posting-Host:	207.148.133.61
X-Original-NNTP-Posting-Host:	207.148.133.61
Message-ID:	<3977938a_1@news.cadvision.com>
X-Trace:	20 Jul 2000 18:04:26 -0700, 207.148.133.61
Organization:	CADVision Development Corporation (http://www.cadvision.com/)
X-Original-NNTP-Posting-Host:	204.50.1.43
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

>> Starting from # 4, I always get bad command.

Do you mean that DOS says "Bad command or file name" ?

This means that your DJGPP installation isn't set up right. You will need to
add the following lines to the end of your c:\autoexec.bat file:

set PATH=C:\DJGPP\BIN;%PATH%
set DJGPP=C:\DJGPP\DJGPP.ENV

And perhaps these to your c:\config.sys file:

shell=c:\command.com c:\ /e:2048 /p
files=40
fcbs=40,0

Reboot your computer, and try the following:

gxx hello.cpp -o hello.exe

Note that GCC doesn't like CPP files "right off the bat" (meaning it needs
extra switches to handle C++ extensions). GXX works fine.


As for "stubify", assuming you have DJGPP 2.0 or greater, you shouldn't get
any errors or need to do stubbing manually.

Hope that helps,

- Betelgeuse

"george" <ghanna8136 AT mediaone DOT net> wrote in message
news:000c01bff203$3c8d9a80$a41bfea9 AT we DOT mediaone DOT net...
Dear Sir

I tried hard to start the compiler, But I failed to do that.
So I got the following instruction:

1) Write the source code using Notepad and save it as a .cpp file. This
example will use hello.cpp as the file name.
2) Go to the DOS Prompt. (Start | Program Files | MS DOS Prompt)
3) Change the directory to the directory where you saved the source code.
(cd\djgpp\src)
4) Type   gcc -c -Wall hello.cpp
5) Press Enter.
6) Type   gxx -o hello.exe hello.o
7) Press Enter.
8) You will get an error about Stubify, this is okay.
9) Type   hello.exe

Unfortunately, It did not work too.
Starting from # 4, I always get bad command.
Please tell me what can I do.

Thank you
George

- Raw text -