delorie.com/archives/browse.cgi   search  
Mail Archives: djgpp/2000/06/11/15:39:56

From: "Alexei A. Frounze" <see_below AT the_messasge_body DOT com>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: far pointers
Date: Sun, 11 Jun 2000 17:03:04 +0400
Organization: None
Lines: 66
Message-ID: <39438E08.CED69BAE@the_messasge_body.com>
References: <Pine DOT SUN DOT 3 DOT 91 DOT 1000611150731 DOT 24657B-100000 AT is>
NNTP-Posting-Host: ppp108-186.dialup.mtu-net.ru
Mime-Version: 1.0
X-Trace: gavrilo.mtu.ru 960728563 79700 212.188.108.186 (11 Jun 2000 13:02:43 GMT)
X-Complaints-To: usenet-abuse AT mtu DOT ru
NNTP-Posting-Date: 11 Jun 2000 13:02:43 GMT
X-Mailer: Mozilla 4.72 [en] (Win95; I)
X-Accept-Language: en,ru
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

Eli Zaretskii wrote:

[snip]
> 
> Try to avoid reinventing the Intel manual ;-).

OKay, let's define it as
INTEL 80386 PROGRAMMER'S REFERENCE MANUAL 1986 states
(Chapter 1  Introduction to the 80386, 
 1.1  Organization of This Manual) and give up:
--------------------------8<-----------------------------
...
Virtual 8086 mode (also called V86 mode) is a dynamic mode in the sense
that the processor can switch repeatedly and rapidly between V86 mode and
protected mode. The CPU enters V86 mode from protected mode to execute an
8086 program, then leaves V86 mode and enters protected mode to continue
executing a native 80386 program.

The features that are available to applications programs in protected mode
and to all programs in V86 mode are the same. These features form the
content of Part I. The additional features that are available to systems
software in protected mode form Part II. Part III explains real-address
mode and V86 mode, as well as how to execute a mix of 32-bit and 16-bit
programs.
...
--------------------------8<-----------------------------

Chapter 15  Virtual 8086 Mode:
--------------------------8<-----------------------------
The 80386 supports execution of one or more 8086, 8088, 80186, or 80188
programs in an 80386 protected-mode environment. An 8086 program runs in
this environment as part of a V86 (virtual 8086) task. V86 tasks take
advantage of the hardware support of multitasking offered by the protected
mode. Not only can there be multiple V86 tasks, each one executing an 8086
program, but V86 tasks can be multiprogrammed with other 80386 tasks.

The purpose of a V86 task is to form a "virtual machine" with which to
execute an 8086 program. A complete virtual machine consists not only of
80386 hardware but also of systems software. Thus, the emulation of an 8086
is the result of cooperation between hardware and software:

  _  The hardware provides a virtual set of registers (via the TSS), a
     virtual memory space (the first megabyte of the linear address space of
     the task), and directly executes all instructions that deal with these
     registers and with this address space.

  _  The software controls the external interfaces of the virtual machine
     (I/O, interrupts, and exceptions) in a manner consistent with the
     larger environment in which it executes. In the case of I/O, software
     can choose either to emulate I/O instructions or to let the hardware
     execute them directly without software intervention.

Software that helps implement virtual 8086 machines is called a V86
monitor.
--------------------------8<-----------------------------


:)

bye.
Alexei A. Frounze
-----------------------------------------
E-mail:   alexfru [AT] chat [DOT] ru
Homepage: http://alexfru.chat.ru
Mirror:   http://members.xoom.com/alexfru

- Raw text -


  webmaster     delorie software   privacy  
  Copyright © 2019   by DJ Delorie     Updated Jul 2019