From:	lordmyelin AT aol DOT com (LordMyelin)
Newsgroups:	comp.os.msdos.djgpp
Subject:	HELP ME (Allegro)
Lines:	18
NNTP-Posting-Host:	ladder05.news.aol.com
X-Admin:	news AT aol DOT com
Date:	27 Feb 1999 20:32:20 GMT
Organization:	AOL http://www.aol.com
Message-ID:	<19990227153220.13524.00001622@ng-ch1.aol.com>
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

OK, I can't get Allegro to build........
I get an error that says "path not set properly" 
I set the path as it says in the djgpp help files and djgpp works fine when
compiling other programs.
Here's what I did.   I downloaded all the files recommended at Delorie, make
and all...then I installed them to c:\djgpp....
I check out the djgpp.env file to make sure that LFN = y.  It was correct so I
updated my path.  I put this right after echo off on the next line.
set djgpp=c:\djgpp\djgpp.env
set path=c:\djgpp\bin;%path%
I unzipped allegro to c:\djgpp\allegro,,,,
went into allegro under DOS and typed Make.....
first, I had a problem because I also have Borland make, so I copied all of the
allegro files to c:\djgpp\bin and typed make in that directory.
That's where I get the "path not set properly" message.
Help me PLEASE!!!  Thanks guys (and gals) for all your help.
Will

- Raw text -