Mail Archives: djgpp/1998/01/13/07:59:33
"Curtis Wensley" <eto AT globalserve DOT net>
> >I'm running Rhide under Win95 with 48 MB RAM and a
> >Pentium 133. Everything works fine, but after booting Rhide the CPU is
> >working non-stop at full capacity. I tried to change the way Win95
> >starts MS-DOS programs but it did not help. I also found no hint in
> >the FAQ.
> >
> >This state even keeps on after closing RHIDE when loaded from
> >a MS-DOS window. I have to close the MS-DOS to make the
> >CPU-usage come back to nomal.
>
>
> With win95, this is the same with ANY DOS-based program.. What you can try
> is setting the IDLE SENSITIVITY to HIGH in the MISC tab in the dos box's
> properties.. this may help free up CPU time when rhide is running and is
> idle.
>
Hmmm... I'm running W95 OSR2 over a Pentium II right now and I installed my
editor (djgpp code) in the machine and used Norton System Doctor to meassure de
CPU usage and I got it:
1) If I let a DOS task a lot of time idle the CPU usage drops to 0%, otherwise
any DOS program eats 100% of the CPU.
2) The W95 command.com doesn't use CPU.
3) My editor (calls __dpmi_idle) doesn't use CPU if I doesn't use the program
(the CPU is released in 1 second or less and normal operation doesn't take the
100%).
SET
------------------------------------ 0 --------------------------------
Visit my home page: http://set-soft.home.ml.org/
or
http://www.geocities.com/SiliconValley/Vista/6552/
Salvador Eduardo Tropea (SET). (Electronics Engineer)
Alternative e-mail: set-sot AT usa DOT net - ICQ: 2951574
Address: Curapaligue 2124, Caseros, 3 de Febrero
Buenos Aires, (1678), ARGENTINA
TE: +(541) 759 0013
- Raw text -