delorie.com/archives/browse.cgi   search  
Mail Archives: djgpp/1995/11/05/07:19:35

Xref: news-dnh.mv.net comp.os.msdos.4dos:3499 comp.os.msdos.apps:4643
comp.os.msdos.desqview:2140 comp.os.msdos.djgpp:3050
comp.os.msdos.mail-news:1765 comp.os.msdos.misc:15180
comp.os.msdos.pcgeos:165 comp.os.msdos.programmer:15691
comp.os.msdos.programmer.turbovision:2133
Path: news-dnh.mv.net!mv!news.sprintlink.net!eskimo!guysmiley.blarg.com!usenet
From: warrl AT blarg DOT net (Warrl kyree Tale'sedrin)
Newsgroups: comp.os.msdos.4dos,comp.os.msdos.apps,comp.os.msdos.desqview,comp.os.msdos.djgpp,comp.os.msdos.mail-news,comp.os.msdos.misc,comp.os.msdos.pcgeos,comp.os.msdos.programmer,comp.os.msdos.programmer.turbovision
Subject: Re: MS DOS help needed
Date: Sat, 04 Nov 1995 19:08:54 GMT
Organization: None -- just look at my desk!
Lines: 38
Distribution: inet
References: <47aknc$ebq AT gti DOT gti DOT net>
Reply-To: warrl AT blarg DOT net
Nntp-Posting-Host: dialup02.blarg.net
To: djgpp AT sun DOT soe DOT clarkson DOT edu
Dj-Gateway: from newsgroup comp.os.msdos.djgpp

Joe Plescia                             <jplescia AT plescia DOT com> wrote:

>Does any one know how to get fdisk (dos ver 6.2) to partition
>a disk bigger than 500meg?  I have an approx 840 ide drive and
>fdisk does not let me part. it mode than approx 500m....
>Norton show the correct size...bios/cmos shows the correct size too...
>Any Ideas???

FDISK is fine.  Your problem lies deeper.  Specifically, your BIOS
cannot see more than 1024 cylinders on the drive.

Fixes:

(1) a new motherboard.  If you've been thinking about getting one,
this would be a good time.  If you've been thinking about upgrading
from a 386SX to a 386DX, or a 386 to a 486, or a 486 to a Pentium, you
want a new motherboard not just a new processor.

(2) a new EIDE disk controller card which includes an automatic BIOS
patching function.  It will be able to handle the disk drive(s) you
have.  Note: it is possible your current motherboard has the disk
controller on it; if so, you'll need the motherboard manual to find
how to disable that controller.  More likely your disk controller is
on a separate card, which you will remove -- just move all the cables
from it to similarly-labelled connectors on the new card.

(3) a new BIOS.  If you don't know how to get the necessary
information for this, I suggest taking your computer into the shop.  I
am not going to try to explain it in text -- that would be similar to
writing a detailed explanation of how to tie shoelaces.

(4) a software BIOS patch.  There is one called Disk Manager which
probably came with your drive.  This is the cheap, easy, least
desirable approach.

<Followups should be trimmed, but I have no idea where this guy was
posting from.>

- Raw text -


  webmaster     delorie software   privacy  
  Copyright © 2019   by DJ Delorie     Updated Jul 2019