Mail Archives: djgpp-workers/2009/09/17/18:21:08
Am Mittwoch, 16. September 2009 schrieb Eli Zaretskii:
> FYI
>
> Juan, this would be a good time to resubmit your DJGPP patches, so
> that they will be included in Make 3.82.
>
> Thanks.
>
[snip]
This patch contains the changes required to compile and run the testsuite
using DJGPP. It is basicaly the same that I have submitted almost two years
ago. I have removed the part to fix the broken path support for MSDOS/WINDOWS
because this has already been fixed.
For a description of what the patch was supposed to fix in its original version
see:
<http://lists.gnu.org/archive/html/bug-make/2008-01/msg00008.html>
<http://lists.gnu.org/archive/html/bug-make/2008-06/msg00059.html>
Regards,
Juan M. Guerrero
2008-01-14 Juan Manuel Guerrero <juan DOT guerrero AT gmx DOT de>
* glob/glob.c (my_realloc): Don't define, and don't redefine realloc
to call it since the DJGPP realloc handles NULL pointers.
* configh.dos.template: Remove unconditional definition of SYS_SIGLIST_DECLARED.
Include <sys/version.h> because ports of GCC 4.3.0 and later no longer
include it, so macros like __DJGPP_MINOR__ are no longer defined automatically.
* Makefile.DOS.template (INCLUDES): Use $(prefix) and the corresponding
variables to define LIBDIR, INCLUDEDIR and LOCALEDIR instead of using
the hardcoded ones.
(SUBDIRS): doc subdir added.
(INFO_DEPS, DVIS): Values changed to 'make.info' and 'make.dvi'.
(TEXI2HTML, TEXI2HTML_FLAGS): Removed. Use makeinfo --html to
create html formated docs. texi2html may not be ported to DOS.
(make.info, make.dvi, make.ps, make.html): Make targets depend on
'make.texi'.
(.texi.info, .texi, .texi.dvi): Now recursively invocate. Change
-I switch to look in ./ instead of ./doc.
(html): Target depend on html-recursive instead of make_1.html.
(make_1.html): Removed.
(mostlyclean-aminfo): Use $(srcdir)/doc instead of ./ as prefix.
(all-recursive): Allow for more than one subdir in the build process.
(mostlyclean-recursive, clean-recursive, distclean-recursive,
maintainer-clean-recursive, check-recursive): Enter in doc/ too.
(tags-recursive): Allow for more than one subdir in the build process.
(info-recursive, dvi-recursive, ps-recursive, html-recursive): New
targets. Enter into doc/ to produce the targets.
(all-am): $(INFO_DEPS) replaced by info.
* tests/scripts/options/dash-B: Define $error_message to allow for an
error message that may be specific to a particular libc implementation.
* tests/scripts/options/dash-k: Define $error_message to allow for an
error message that may be specific to a particular libc implementation.
* tests/scripts/options/dash-W: Define $error_message to allow for an
error message that may be specific to a particular libc implementation.
* tests/scripts/targets/SECONDARY: If the port does not support
parallelism inhibit test cases #9 and #10 (Savannah bug #15919).
* tests/scripts/variables/MAKE_RESTARTS: Define $error_message to allow
error message that may be specific to a particular libc implementation.
* tests/scripts/variables/SHELL: If compiled with DJGPP, do not run
this test at all.
Index: Makefile.DOS.template
===================================================================
RCS file: /sources/make/make/Makefile.DOS.template,v
retrieving revision 2.16
diff -u -r2.16 Makefile.DOS.template
--- Makefile.DOS.template 22 Dec 2007 12:07:36 -0000 2.16
+++ Makefile.DOS.template 17 Sep 2009 19:54:09 -0000
@@ -2,7 +2,7 @@
# Makefile.in generated automatically by automake 1.2 from Makefile.am
#
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
-# 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+# 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This file is part of GNU Make.
#
# GNU Make is free software; you can redistribute it and/or modify it under
@@ -85,13 +85,13 @@
man_MANS = make.1
-INCLUDES = -I$(srcdir)/glob -DLIBDIR=\"c:/djgpp/lib\" -DINCLUDEDIR=\"c:/djgpp/include\" -DLOCALEDIR=\"$(localedir)\"
+INCLUDES = -I$(srcdir)/glob -DLIBDIR=\"$(prefix)$(libdir)\" -DINCLUDEDIR=\"$(prefix)$(includedir)\" -DLOCALEDIR=\"$(prefix)$(localedir)\"
BUILT_SOURCES = README build.sh-in
EXTRA_DIST = $(BUILT_SOURCES) $(man_MANS) README.customs remote-cstms.c make-stds.texi texinfo.tex SCOPTIONS SMakefile Makefile.ami README.Amiga config.ami amiga.c amiga.h NMakefile README.DOS configh.dos configure.bat makefile.com README.W32 build_w32.bat config.h-W32 subproc.bat make.lnk config.h-vms makefile.vms readme.vms vmsdir.h vmsfunctions.c vmsify.c
-SUBDIRS = glob
+SUBDIRS = glob doc
mkinstalldirs = ${exec_prefix}/bin/gmkdir -p
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = build.sh
@@ -115,16 +115,13 @@
LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
TEXI2DVI = texi2dvi
TEXINFO_TEX = $(srcdir)/config/texinfo.tex
-INFO_DEPS = make.info
-DVIS = make.dvi
+INFO_DEPS = doc/make.info
+DVIS = doc/make.dvi
TEXINFOS = doc/make.texi
noinst_TEXINFOS = doc/fdl.texi doc/make-stds.texi
man1dir = $(mandir)/man1
MANS = $(man_MANS)
-TEXI2HTML = texi2html
-TEXI2HTML_FLAGS = -split_chapter
-
NROFF = nroff
DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL Makefile.am Makefile.in NEWS acconfig.h aclocal.m4 alloca.c build.sh-in config.h-in configure configure.in getloadavg.c
@@ -191,8 +188,10 @@
# Documentation
-make.info: doc/make.texi
-make.dvi: doc/make.texi
+make.info: make.texi
+make.dvi: make.texi
+make.ps: make.dvi make.texi
+make.html: make.texi
DVIPS = dvips
@@ -200,32 +199,33 @@
.texi.info:
@command.com /c if exist make.info* del make.info*
@command.com /c if exist make.i* del make.i*
- $(MAKEINFO) -I$(srcdir)/doc --no-split $< -o ./$@
+ $(MAKEINFO) -I$(srcdir) --no-split $< -o ./$@
.texi:
@command.com /c if exist make.info* del make.info*
@command.com /c if exist make.i* del make.i*
- $(MAKEINFO) -I$(srcdir)/doc --no-split $< -o ./$@
+ $(MAKEINFO) -I$(srcdir) --no-split $< -o ./$@
.texi.dvi:
- TEXINPUTS="$(srcdir)/doc;$$TEXINPUTS" MAKEINFO='$(MAKEINFO) -I $(srcdir)/doc' $(TEXI2DVI) $<
+ TEXINPUTS="$(srcdir);$$TEXINPUTS" MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.dvi.ps:
$(DVIPS) $< -o $@
# Other documentation formats
-html: make_1.html
+html: html-recursive
-make_1.html: $(TEXINFOS) $(noinst_TEXINFOS)
- $(TEXI2HTML) $(TEXI2HTML_FLAGS) $(srcdir)/doc/make.texi
+.texi.html:
+ @command.com /c if exist make.html* del make.html*
+ $(MAKEINFO) --html -I$(srcdir) --no-split $< -o ./$@
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(infodir)
- @for file in $(INFO_DEPS); do d=$(srcdir); for ifile in `cd $$d && echo $$file`; do if test -f $$d/$$ifile; then echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; else : ; fi; done; done
+ @for file in $(INFO_DEPS); do iifile=`echo $$file | sed "s|doc/||"`; d=$(srcdir); for ifile in `cd $$d && echo $$file`; do if test -f $$d/$$ifile; then echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$iifile"; $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$iifile; else : ; fi; done; done
@$(POST_INSTALL)
- @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then for file in $(INFO_DEPS); do echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file"; install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :; done; else : ; fi
+ @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then for file in $(INFO_DEPS); do iifile=`echo $$file | sed "s|doc/||"`; echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$iifile"; install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$iifile || :; done; else : ; fi
uninstall-info:
$(PRE_UNINSTALL)
@@ -237,9 +237,12 @@
for base in $(INFO_DEPS); do d=$(srcdir); for file in `cd $$d && eval echo $$base*`; do test -f $(distdir)/$$file || ln $$d/$$file $(distdir)/$$file 2> /dev/null || cp -p $$d/$$file $(distdir)/$$file; done; done
mostlyclean-aminfo:
- -rm -f make.aux make.cp make.cps make.dvi make.fn make.fns make.ky \
- make.kys make.ps make.log make.pg make.toc make.tp make.tps \
- make.vr make.vrs make.op make.tr make.cv make.cn
+ -rm -f $(srcdir)/doc/make.aux $(srcdir)/doc/make.cp $(srcdir)/doc/make.cps $(srcdir)/doc/make.dvi \
+ $(srcdir)/doc/make.fn $(srcdir)/doc/make.fns $(srcdir)/doc/make.ky $(srcdir)/doc/make.kys \
+ $(srcdir)/doc/make.ps $(srcdir)/doc/make.log $(srcdir)/doc/make.pg $(srcdir)/doc/make.toc \
+ $(srcdir)/doc/make.tp $(srcdir)/doc/make.tps $(srcdir)/doc/make.vr $(srcdir)/doc/make.vrs \
+ $(srcdir)/doc/make.op $(srcdir)/doc/make.tr $(srcdir)/doc/make.cv $(srcdir)/doc/make.cn \
+ $(srcdir)/doc/make.html
clean-aminfo:
@@ -291,13 +294,10 @@
# but do a sanity check: if $SUBDIRS will ever have more than
# a single directory, yell bloody murder.
all-recursive:
-ifeq ($(words $(SUBDIRS)), 1)
+ifeq ($(findstring glob, $(SUBDIRS)), glob)
@command.com /c if not exist glob\\nul md glob
- @echo Making all in $(SUBDIRS)
- $(MAKE) -C $(SUBDIRS) -f ../Makefile INCLUDES='-I$(srcdir) -I$(srcdir)/glob' DEFS='-I.. -I$(srcdir)' VPATH=$(srcdir)/glob libglob.a
-else
- @echo FATAL: There is more than one directory in "($(SUBDIRS))"
- @$(EXIT_FAIL)
+ @echo Making all in glob
+ $(MAKE) -C glob -f ../Makefile INCLUDES='-I$(srcdir) -I$(srcdir)/glob' DEFS='-I.. -I$(srcdir)' VPATH=$(srcdir)/glob libglob.a
endif
$(SUBDIRS):
@@ -310,11 +310,13 @@
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive check-recursive:
-ifeq ($(words $(SUBDIRS)), 1)
- @echo Making $(shell echo $@ | sed s/-recursive//) in $(SUBDIRS)
- $(MAKE) -C $(SUBDIRS) -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
+ifeq ($(words $(SUBDIRS)), 2)
+ @echo Making $(shell echo $@ | sed s/-recursive//) in glob
+ $(MAKE) -C glob -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
+ @echo Making $(shell echo $@ | sed s/-recursive//) in doc
+ $(MAKE) -C doc -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
else
- @echo FATAL: There is more than one directory in "($(SUBDIRS))"
+ @echo FATAL: There is more than two directory in "($(SUBDIRS))"
@$(EXIT_FAIL)
endif
@@ -322,10 +324,10 @@
etags $(addprefix $(srcdir)/,$^) -o ./glob/TAGS
tags-recursive:
-ifeq ($(words $(SUBDIRS)), 1)
+ifeq ($(words $(SUBDIRS)), 2)
$(MAKE) tags-in-glob
else
- @echo FATAL: There is more than one directory in "($(SUBDIRS))"
+ @echo FATAL: There is more than two directory in "($(SUBDIRS))"
@$(EXIT_FAIL)
endif
@@ -376,15 +378,44 @@
$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
-info: $(INFO_DEPS) info-recursive
-dvi: $(DVIS) dvi-recursive
+info: info-recursive
+info-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+ @command.com /c if not exist doc\\nul md doc
+ @echo Making all in doc
+ $(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.info
+endif
+
+dvi: dvi-recursive
+dvi-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+ @command.com /c if not exist doc\\nul md doc
+ @echo Making all in doc
+ $(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.dvi
+endif
+
+ps: ps-recursive
+ps-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+ @command.com /c if not exist doc\\nul md doc
+ @echo Making all in doc
+ $(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.ps
+endif
+
+html-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+ @command.com /c if not exist doc\\nul md doc
+ @echo Making all in doc
+ $(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.html
+endif
+
check: all-am check-recursive check-local
@:
installcheck: installcheck-recursive
all-recursive-am: config.h
$(MAKE) all-recursive
-all-am: Makefile $(INFO_DEPS) $(PROGRAMS) config.h
+all-am: Makefile $(PROGRAMS) config.h info
install-exec-am: install-binPROGRAMS
Index: configh.dos.template
===================================================================
RCS file: /sources/make/make/configh.dos.template,v
retrieving revision 1.19
diff -u -r1.19 configh.dos.template
--- configh.dos.template 22 Dec 2007 11:27:02 -0000 1.19
+++ configh.dos.template 17 Sep 2009 19:54:09 -0000
@@ -16,12 +16,16 @@
You should have received a copy of the GNU General Public License along with
this program. If not, see <http://www.gnu.org/licenses/>. */
+/* Include this header to make __DJGPP_MINOR__ available because DJGPP ports
+ of GCC 4.3.0 and later no longer do it automatically. */
+#include <sys/version.h>
+
/* Many things are defined already by a system header. */
#include <sys/config.h>
#if __DJGPP__ > 2 || __DJGPP_MINOR__ > 1
-/* Define to 1 if `sys_siglist' is declared by <signal.h>. */
+/* Define to 1 if `sys_siglist' is declared by <signal.h> or <unistd.h>. */
# define SYS_SIGLIST_DECLARED 1
/* Define to 1 if the C library defines the variable `_sys_siglist'. */
@@ -107,9 +111,6 @@
/* Define to 1 if the C compiler supports function prototypes. */
#define PROTOTYPES 1
-/* Define to 1 if `sys_siglist' is declared by <signal.h> or <unistd.h>. */
-#define SYS_SIGLIST_DECLARED 1
-
/* Version number of package */
#define VERSION "%VERSION%"
Index: glob/glob.c
===================================================================
RCS file: /sources/make/make/glob/glob.c,v
retrieving revision 1.28
diff -u -r1.28 glob.c
--- glob/glob.c 22 Dec 2007 11:28:49 -0000 1.28
+++ glob/glob.c 17 Sep 2009 19:54:09 -0000
@@ -182,7 +182,7 @@
# define mempcpy(Dest, Src, Len) __mempcpy (Dest, Src, Len)
#endif
-#ifndef __GNU_LIBRARY__
+#if !defined __GNU_LIBRARY__ && !defined __DJGPP__
# ifdef __GNUC__
__inline
# endif
@@ -190,9 +190,6 @@
# ifdef WINDOWS32
static void *
my_realloc (void *p, unsigned int n)
-# elif defined(__DJGPP__)
-static void *
-my_realloc (void *p, size_t n)
# else
static char *
my_realloc (p, n)
@@ -208,7 +205,7 @@
}
# define realloc my_realloc
# endif /* __SASC */
-#endif /* __GNU_LIBRARY__ */
+#endif /* __GNU_LIBRARY__ || __DJGPP__ */
#if !defined __alloca && !defined __GNU_LIBRARY__
Index: tests/scripts/options/dash-B
===================================================================
RCS file: /sources/make/make/tests/scripts/options/dash-B,v
retrieving revision 1.5
diff -u -r1.5 dash-B
--- tests/scripts/options/dash-B 13 Jun 2009 21:21:49 -0000 1.5
+++ tests/scripts/options/dash-B 17 Sep 2009 19:54:10 -0000
@@ -38,15 +38,27 @@
# Test -B with the re-exec feature: we don't want to re-exec forever
# Savannah bug # 7566
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ #
+ # If compiled with DJGPP an error message (ENOENT) is issued.
+ #
+ $error_message = ' (ENOENT)';
+ }
+}
+else {
+ $error_message = '';
+}
+
run_make_test('
all: ; @:
$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
include foo.x
foo.x: ; @touch $@
',
- '-B', 'MAKE_RESTARTS=
-#MAKEFILE#:4: foo.x: No such file or directory
-MAKE_RESTARTS=1');
+ '-B', "MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory$error_message
+MAKE_RESTARTS=1");
rmfiles('foo.x');
@@ -62,11 +74,11 @@
foo.x: ; @touch $@
blah.x: ; @echo $@
',
- '-B', 'MAKE_RESTARTS=
-#MAKEFILE#:4: foo.x: No such file or directory
+ '-B', "MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory$error_message
MAKE_RESTARTS=1
blah.x
-all');
+all");
rmfiles('foo.x', 'blah.x');
Index: tests/scripts/options/dash-W
===================================================================
RCS file: /sources/make/make/tests/scripts/options/dash-W,v
retrieving revision 1.5
diff -u -r1.5 dash-W
--- tests/scripts/options/dash-W 8 Mar 2006 20:15:09 -0000 1.5
+++ tests/scripts/options/dash-W 17 Sep 2009 19:54:10 -0000
@@ -33,6 +33,18 @@
# First set it up with a normal build
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ #
+ # If compiled with DJGPP an error message (ENOENT) is issued.
+ #
+ $error_message = ' (ENOENT)';
+ }
+}
+else {
+ $error_message = '';
+}
+
run_make_test('
all: baz.x ; @:
include foo.x
@@ -42,11 +54,11 @@
bar.x: ; echo >> $@
baz.x: bar.x ; @echo "touch $@"
',
- '', '#MAKEFILE#:3: foo.x: No such file or directory
+ '', "#MAKEFILE#:3: foo.x: No such file or directory$error_message
echo >> bar.x
touch foo.x
restarts=1
-touch baz.x');
+touch baz.x");
# Now run with -W bar.x
Index: tests/scripts/options/dash-k
===================================================================
RCS file: /sources/make/make/tests/scripts/options/dash-k,v
retrieving revision 1.3
diff -u -r1.3 dash-k
--- tests/scripts/options/dash-k 16 May 2004 19:16:56 -0000 1.3
+++ tests/scripts/options/dash-k 17 Sep 2009 19:54:10 -0000
@@ -100,12 +100,24 @@
# TEST -- make sure we keep the error code if we can't create an included
# makefile.
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ #
+ # If compiled with DJGPP an error message (ENOENT) is issued.
+ #
+ $error_message = ' (ENOENT)';
+ }
+}
+else {
+ $error_message = '';
+}
+
run_make_test('all: ; @echo hi
include ifile
ifile: no-such-file; @false
',
'-k',
- "#MAKEFILE#:2: ifile: No such file or directory
+ "#MAKEFILE#:2: ifile: No such file or directory$error_message
#MAKE#: *** No rule to make target `no-such-file', needed by `ifile'.
#MAKE#: Failed to remake makefile `ifile'.
hi\n",
Index: tests/scripts/targets/SECONDARY
===================================================================
RCS file: /sources/make/make/tests/scripts/targets/SECONDARY,v
retrieving revision 1.6
diff -u -r1.6 SECONDARY
--- tests/scripts/targets/SECONDARY 15 Aug 2007 13:53:54 -0000 1.6
+++ tests/scripts/targets/SECONDARY 17 Sep 2009 19:54:10 -0000
@@ -121,6 +121,10 @@
unlink('version2');
+if (!$parallel_jobs) {
+ return 1;
+}
+
# TEST #9 -- Savannah bug #15919
# The original fix for this bug caused a new bug, shown here.
Index: tests/scripts/variables/MAKE_RESTARTS
===================================================================
RCS file: /sources/make/make/tests/scripts/variables/MAKE_RESTARTS,v
retrieving revision 1.1
diff -u -r1.1 MAKE_RESTARTS
--- tests/scripts/variables/MAKE_RESTARTS 25 Jun 2005 18:57:28 -0000 1.1
+++ tests/scripts/variables/MAKE_RESTARTS 17 Sep 2009 19:54:10 -0000
@@ -4,15 +4,27 @@
# Test basic capability
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ #
+ # If compiled with DJGPP an error message (ENOENT) is issued.
+ #
+ $error_message = ' (ENOENT)';
+ }
+}
+else {
+ $error_message = '';
+}
+
run_make_test('
all: ; @:
$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
include foo.x
foo.x: ; @touch $@
',
- '', 'MAKE_RESTARTS=
-#MAKEFILE#:4: foo.x: No such file or directory
-MAKE_RESTARTS=1');
+ '', "MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory$error_message
+MAKE_RESTARTS=1");
rmfiles('foo.x');
@@ -25,11 +37,11 @@
foo.x: ; @echo "include bar.x" > $@
bar.x: ; @touch $@
',
- '', 'MAKE_RESTARTS=
-#MAKEFILE#:4: foo.x: No such file or directory
+ '', "MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory$error_message
MAKE_RESTARTS=1
-foo.x:1: bar.x: No such file or directory
-MAKE_RESTARTS=2');
+foo.x:1: bar.x: No such file or directory$error_message
+MAKE_RESTARTS=2");
rmfiles('foo.x', 'bar.x');
@@ -47,9 +59,9 @@
bar.x: ; @touch $@
',
'', "MAKE_RESTARTS=
-#MAKEFILE#:8: foo.x: No such file or directory
+#MAKEFILE#:8: foo.x: No such file or directory$error_message
MAKE_RESTARTS=1
-foo.x:1: bar.x: No such file or directory
+foo.x:1: bar.x: No such file or directory$error_message
MAKE_RESTARTS=2
recurse MAKE_RESTARTS=
MAKE_RESTARTS=
Index: tests/scripts/variables/SHELL
===================================================================
RCS file: /sources/make/make/tests/scripts/variables/SHELL,v
retrieving revision 1.6
diff -u -r1.6 SHELL
--- tests/scripts/variables/SHELL 6 Jun 2009 23:16:47 -0000 1.6
+++ tests/scripts/variables/SHELL 17 Sep 2009 19:54:10 -0000
@@ -2,6 +2,12 @@
$description = "Test proper handling of SHELL.";
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ return -1;
+ }
+}
+
# Find the default value when SHELL is not set. On UNIX it will be /bin/sh,
# but on other platforms who knows?
resetENV();
- Raw text -