Mail Archives: djgpp-workers/2008/01/14/19:58:11
Am Samstag, 22. Dezember 2007 13:12 schrieb Eli Zaretskii:
> > I have appended a small patch that shows the things I had to change to get a
> > working make binary. That patch is not intended to be used. It shall only
> > show the code lines that may need to be adjusted to solve the problems. There
> > may be better ways to solve the issue, but I am not familiar enough with the
> > make sources to provide a better patch. There may be also much more MSDOS or
> > DJGPp specific things that may be fixed. The patch only fixes things that I am
> > aware. Things that may cause trouble are drive letters, checks for absolute
> > patch, etc, etc etc. The usual DOS/WINDOWS things.
>
> Thanks, Juan. Your warnings notwithstanding, I did install your
> patches. I no longer have time to do any significant work on the
> DJGPP port of Make, so installing your changes will at least give
> DJGPP users a binary that works better than with the original sources.
I am sorry to hear that but in this case a little bit more elaborated
patch must be presented. This patch is based on today's CVS head sources
and has been tested on my linux and DOS box. The patch will treat three
issues:
- the make code itself
- the testsuite
- the supplementary DOS specific build files
1) The make code.
The most escential change is in function abspath() in function.c.
This function is completely unix centric and that is the reason
why the test case functions/abspath fails for the DJGPP port of make.
The patch will change this function in such a way that it will be
able to handle the DOS/DJGPP specific cases with paths that may
have backslashes instead of slashes as dir separators or may have
mixed backslashes and slashes as dir separators or may have a drive
letter prepended to the path. To handle all these issues macros
like HAVE_DRIVE and IS_PATHSEP are used. The definition of all
OS specific macros to handle path issues have been moved to a canonical
place, following the same policy than in GNU texinfo and GNU bison and
some other programs that support not unix-like OSs, that is make.h.
In make.h there are already lines like:
/* Handle other OSs. */
#ifndef PATH_SEPARATOR_CHAR
# if defined(HAVE_DOS_PATHS)
# define PATH_SEPARATOR_CHAR ';'
# elif defined(VMS)
# define PATH_SEPARATOR_CHAR ','
# else
# define PATH_SEPARATOR_CHAR ':'
# endif
#endif
those have been replaced by:
/* Handle other OSs. */
#ifndef PATH_SEPARATOR_CHAR
# if defined(HAVE_DOS_PATHS)
# define PATH_SEPARATOR_CHAR ';'
# define IS_PATHSEP(c) ((c) == '/' || (c) == '\\')
# define HAVE_DRIVE(n) ((n)[0] && (n)[1] == ':')
# elif defined(VMS)
# define PATH_SEPARATOR_CHAR ','
# define IS_PATHSEP(c) ((c) == ']')
# else
# define PATH_SEPARATOR_CHAR ':'
# define IS_PATHSEP(c) ((c) == '/')
# endif
#endif
having all OS specific issues in one place and removing those definitions
from their original places. With those changes supplied by the patch the
DJGPP port of make is again able to handle paths that follows the DOS
syntax. Other changes are to pacify the compiler.
2) The testsuite.
Here two kind of modifications are required: first does to inhibit those
test cases that make no sense with this particular port and second those
to adjust the test cases in such a way that they work with this port.
The test case variables/shell will probably never work with this port
so I have disabled it with the following code snippet:
if ($port_type eq "DOS") {
if (exists $ENV{DJDIR}) {
return -1;
}
}
May be some day I may have enough time look more carefully to this test case
and I will figure out how some of the test may be got to execute on DOS/DJGPP
but actualy it is not possible.
The second test case that does not work correctly with DOS/DJGPP is
targets/SECONDARY. The tests #9 and #10 are related to Savannah bug #15919 and
require the paralelism of make. Paralllelism will never by available for the
DJGPP port of make so I have added the following lines after test #8 to inhibit
the execution of the rest of the tests:
if (!$parallel_jobs) {
return 1;
}
This should be good for all ports that do not offer parallelism.
For functions/abspath new DOS specific tests have been added. Of course they
will only be executed if $port_type is "DOS" and DJDIR is set in the environment
identifying the DJGPP port of make. For almost every unix type of test up to
three similar DOS tests have been added to test the supported different DOS
style variants of paths. These are:
\foo\bar
\foo/bar
and both with a drive letter prepended.
All other changes are required to get different tests working. E.G.: certain
tests will produce output like this:
#MAKEFILE#:4: foo.x: No such file or directory
but the DJGPP port will produce output like this:
#MAKEFILE#:4: foo.x: No such file or directory (ENOENT)
Although the test was successful, diff will note the difference in the output
strings and will report that the test has failed. To avoid this kind of
failure the following lines have been added where they were required:
if ($port_type eq "DOS") {
if (exists $ENV{DJDIR}) {
$error_message = '(ENOENT)';
}
}
else {
$error_message = '';
}
This concerns the tests options/dash-B, options/dash-k, options/dash-W and
variables/MAKE_RESTARTS.
3) The supplementary DOS specific build files
The most important change is that $(prefix) is used to define the variables
LIBDIR, INCLUDEDIR and LOCALEDIR instead of hard coded ones. Also the way
the docs are generated have been modified so that the results and intermediary
files are generated in doc/ instead of the $(srcdir).
For further details, please inspect the path.
I cc the message to djgpp-workers, may be someone else want to contribute
something. As usual suggestions, objections, comments are welcome.
Regards,
Juan m. Guerrero
2008-01-14 Juan Manuel Guerrero <juan DOT guerrero AT gmx DOT de>
* implicit.c: Add const qualifier to *lastslash so it has the
same one than *filename and to avoid compiler warnings.
* dir.c (file_exists_p) [HAVE_DOS_PATHS]: Use HAVE_DRIVE.
(file_impossible) [HAVE_DOS_PATHS]: Use HAVE_DRIVE.
(file_impossible_p) [HAVE_DOS_PATHS]: Use HAVE_DRIVE.
* function.c [HAVE_DOS_PATHS, VMS]: Remove IS_PATHSEP definition.
Now it is defined in its canonical place in make.h.
(abspath) [HAVE_DOS_PATHS]: Use IS_PATHSEP instead of a literal '/'.
Support d:foo style absolute file names.
Add logic for the case that backslash are path separators.
Include colon as separator char in the IS_PATHSEP definition and
use it to check for root char.
(func_notdir_suffix, func_basename_dir, abspath): Use HAVE_DRIVE.
* glob/glob.c (my_realloc): Don't define, and don't redefine realloc
to call it since the DJGPP realloc handles NULL pointers.
* hash.c (round_up_2): Use 4294967295U to avoid compiler warnings.
* implicit.c (pattern_search) [HAVE_DOS_PATHS]: Use HAVE_DRIVE.
* make.h: All OS specific macros to handle path peculiarities are
defined here.
[HAVE_DOS_PATHS]: New macro HAVE_DRIVE to check for drive specifier
strings like`a:�.
[HAVE_DOS_PATHS, VMS]: Define macro IS_PATHSEP.
* Makefile.DOS.template (INCLUDES): Use $(prefix) instead of the
hardcoded ones in LIBDIR, INCLUDEDIR and LOCALEDIR.
(SUBDIRS): doc subdir added.
(INFO_DEPS, DVIS): Values changed to `make.info� and `make.dvi�.
(TEXI2HTML, TEXI2HTML_FLAGS): Removed. Use makeinfo --html to
create html formated docs. texi2html may not be ported to DOS.
(make.info, make.dvi, make.ps, make.html): Make targets depend on
`make.texi�.
(.texi.info, .texi, .texi.dvi): Now recursively invocate. Change
-I switch to look in ./ instead of ./doc.
(html): Target depend on html-recursive instead of make_1.html.
(make_1.html): Removed.
(mostlyclean-aminfo): Use $(srcdir)/doc instead of ./ as prefix.
(all-recursive): Allow for more than one subdir in the build process.
(mostlyclean-recursive, clean-recursive, distclean-recursive,
maintainer-clean-recursive, check-recursive): Enter in doc/ too.
(tags-recursive): Allow for more than one subdir in the build process.
(info-recursive, dvi-recursive, ps-recursive, html-recursive): New
targets. Enter into doc/ to produce the targets.
(all-am): $(INFO_DEPS) replaced by info.
* dosbuild.bat: Add -DLOCALEDIR to command line to compile main.c.
Remove make.new if build successfull.
Use /dev/env/DJDIR instead of c:/djgpp for -DINCLUDEDIR and
-DLOCALEDIR.
* tests/scripts/functions/abspath: Added new MSDOS specific tests.
They reproduce the complete testcases but using backslash instead
of slash as dir separator and prepend a DOS typical drive letter.
They are only started if DJGPP is used as compiler.
* tests/scripts/options/dash-B: Define $error_message to allow for an
error message that may be issued by different systems.
* tests/scripts/options/dash-k: Define $error_message to allow for an
error message that may be issued by different systems.
* tests/scripts/options/dash-W: Define $error_message to allow for an
error message that may be issued by different systems.
* tests/scripts/targets/SECONDARY: If the port does not support
parallelism inhibit test cases #9 and #10 (Savannah bug #15919).
* tests/scripts/variables/MAKE_RESTARTS: Define $error_message to allow
for an error message that may be issued by different systems.
* tests/scripts/variables/SHELL: If compiled with DJGPP, do not run
this test at all.
Index: Makefile.DOS.template
===================================================================
RCS file: /sources/make/make/Makefile.DOS.template,v
retrieving revision 2.16
diff -U 5 -r2.16 Makefile.DOS.template
--- Makefile.DOS.template 22 Dec 2007 12:07:36 -0000 2.16
+++ Makefile.DOS.template 15 Jan 2008 00:15:34 -0000
@@ -1,10 +1,10 @@
# -*-Makefile-*- template for DJGPP
# Makefile.in generated automatically by automake 1.2 from Makefile.am
#
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
-# 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+# 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This file is part of GNU Make.
#
# GNU Make is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation; either version 3 of the License, or (at your option) any later
@@ -83,17 +83,17 @@
libglob_a_SOURCES = %GLOB_SOURCES%
make_LDADD = glob/libglob.a
man_MANS = make.1
-INCLUDES = -I$(srcdir)/glob -DLIBDIR=\"c:/djgpp/lib\" -DINCLUDEDIR=\"c:/djgpp/include\" -DLOCALEDIR=\"$(localedir)\"
+INCLUDES = -I$(srcdir)/glob -DLIBDIR=\"$(prefix)$(libdir)\" -DINCLUDEDIR=\"$(prefix)$(includedir)\" -DLOCALEDIR=\"$(prefix)$(localedir)\"
BUILT_SOURCES = README build.sh-in
EXTRA_DIST = $(BUILT_SOURCES) $(man_MANS) README.customs remote-cstms.c make-stds.texi texinfo.tex SCOPTIONS SMakefile Makefile.ami README.Amiga config.ami amiga.c amiga.h NMakefile README.DOS configh.dos configure.bat makefile.com README.W32 build_w32.bat config.h-W32 subproc.bat make.lnk config.h-vms makefile.vms readme.vms vmsdir.h vmsfunctions.c vmsify.c
-SUBDIRS = glob
+SUBDIRS = glob doc
mkinstalldirs = ${exec_prefix}/bin/gmkdir -p
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = build.sh
PROGRAMS = $(bin_PROGRAMS)
@@ -113,20 +113,17 @@
CFLAGS = -O2 -g
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
TEXI2DVI = texi2dvi
TEXINFO_TEX = $(srcdir)/config/texinfo.tex
-INFO_DEPS = make.info
-DVIS = make.dvi
+INFO_DEPS = doc/make.info
+DVIS = doc/make.dvi
TEXINFOS = doc/make.texi
noinst_TEXINFOS = doc/fdl.texi doc/make-stds.texi
man1dir = $(mandir)/man1
MANS = $(man_MANS)
-TEXI2HTML = texi2html
-TEXI2HTML_FLAGS = -split_chapter
-
NROFF = nroff
DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL Makefile.am Makefile.in NEWS acconfig.h aclocal.m4 alloca.c build.sh-in config.h-in configure configure.in getloadavg.c
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
@@ -189,38 +186,41 @@
@command.com /c if exist make.exe del make.exe
$(LINK) $(make_LDFLAGS) $(make_OBJECTS) $(make_LDADD) $(LIBS)
# Documentation
-make.info: doc/make.texi
-make.dvi: doc/make.texi
+make.info: make.texi
+make.dvi: make.texi
+make.ps: make.dvi make.texi
+make.html: make.texi
DVIPS = dvips
.texi.info:
@command.com /c if exist make.info* del make.info*
@command.com /c if exist make.i* del make.i*
- $(MAKEINFO) -I$(srcdir)/doc --no-split $< -o ./$@
+ $(MAKEINFO) -I$(srcdir) --no-split $< -o ./$@
.texi:
@command.com /c if exist make.info* del make.info*
@command.com /c if exist make.i* del make.i*
- $(MAKEINFO) -I$(srcdir)/doc --no-split $< -o ./$@
+ $(MAKEINFO) -I$(srcdir) --no-split $< -o ./$@
.texi.dvi:
- TEXINPUTS="$(srcdir)/doc;$$TEXINPUTS" MAKEINFO='$(MAKEINFO) -I $(srcdir)/doc' $(TEXI2DVI) $<
+ TEXINPUTS="$(srcdir);$$TEXINPUTS" MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.dvi.ps:
$(DVIPS) $< -o $@
# Other documentation formats
-html: make_1.html
+html: html-recursive
-make_1.html: $(TEXINFOS) $(noinst_TEXINFOS)
- $(TEXI2HTML) $(TEXI2HTML_FLAGS) $(srcdir)/doc/make.texi
+.texi.html:
+ @command.com /c if exist make.html* del make.html*
+ $(MAKEINFO) --html -I$(srcdir) --no-split $< -o ./$@
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(infodir)
@for file in $(INFO_DEPS); do d=$(srcdir); for ifile in `cd $$d && echo $$file`; do if test -f $$d/$$ifile; then echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; else : ; fi; done; done
@@ -235,13 +235,16 @@
dist-info: $(INFO_DEPS)
for base in $(INFO_DEPS); do d=$(srcdir); for file in `cd $$d && eval echo $$base*`; do test -f $(distdir)/$$file || ln $$d/$$file $(distdir)/$$file 2> /dev/null || cp -p $$d/$$file $(distdir)/$$file; done; done
mostlyclean-aminfo:
- -rm -f make.aux make.cp make.cps make.dvi make.fn make.fns make.ky \
- make.kys make.ps make.log make.pg make.toc make.tp make.tps \
- make.vr make.vrs make.op make.tr make.cv make.cn
+ -rm -f $(srcdir)/doc/make.aux $(srcdir)/doc/make.cp $(srcdir)/doc/make.cps $(srcdir)/doc/make.dvi \
+ $(srcdir)/doc/make.fn $(srcdir)/doc/make.fns $(srcdir)/doc/make.ky $(srcdir)/doc/make.kys \
+ $(srcdir)/doc/make.ps $(srcdir)/doc/make.log $(srcdir)/doc/make.pg $(srcdir)/doc/make.toc \
+ $(srcdir)/doc/make.tp $(srcdir)/doc/make.tps $(srcdir)/doc/make.vr $(srcdir)/doc/make.vrs \
+ $(srcdir)/doc/make.op $(srcdir)/doc/make.tr $(srcdir)/doc/make.cv $(srcdir)/doc/make.cn \
+ $(srcdir)/doc/make.html
clean-aminfo:
distclean-aminfo:
@@ -289,17 +292,14 @@
# Assume that the only thing to do in glob is to build libglob.a,
# but do a sanity check: if $SUBDIRS will ever have more than
# a single directory, yell bloody murder.
all-recursive:
-ifeq ($(words $(SUBDIRS)), 1)
+ifeq ($(findstring glob, $(SUBDIRS)), glob)
@command.com /c if not exist glob\\nul md glob
- @echo Making all in $(SUBDIRS)
- $(MAKE) -C $(SUBDIRS) -f ../Makefile INCLUDES='-I$(srcdir) -I$(srcdir)/glob' DEFS='-I.. -I$(srcdir)' VPATH=$(srcdir)/glob libglob.a
-else
- @echo FATAL: There is more than one directory in "($(SUBDIRS))"
- @$(EXIT_FAIL)
+ @echo Making all in glob
+ $(MAKE) -C glob -f ../Makefile INCLUDES='-I$(srcdir) -I$(srcdir)/glob' DEFS='-I.. -I$(srcdir)' VPATH=$(srcdir)/glob libglob.a
endif
$(SUBDIRS):
command.com /c md $@
@@ -308,26 +308,28 @@
$(AR) cru libglob.a $(libglob_a_OBJECTS) $(libglob_a_LIBADD)
$(RANLIB) libglob.a
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive check-recursive:
-ifeq ($(words $(SUBDIRS)), 1)
- @echo Making $(shell echo $@ | sed s/-recursive//) in $(SUBDIRS)
- $(MAKE) -C $(SUBDIRS) -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
+ifeq ($(words $(SUBDIRS)), 2)
+ @echo Making $(shell echo $@ | sed s/-recursive//) in glob
+ $(MAKE) -C glob -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
+ @echo Making $(shell echo $@ | sed s/-recursive//) in doc
+ $(MAKE) -C doc -f ../Makefile $(shell echo $@ | sed s/-recursive//)-am
else
- @echo FATAL: There is more than one directory in "($(SUBDIRS))"
+ @echo FATAL: There is more than two directory in "($(SUBDIRS))"
@$(EXIT_FAIL)
endif
tags-in-glob: $(libglob_a_SOURCES)
etags $(addprefix $(srcdir)/,$^) -o ./glob/TAGS
tags-recursive:
-ifeq ($(words $(SUBDIRS)), 1)
+ifeq ($(words $(SUBDIRS)), 2)
$(MAKE) tags-in-glob
else
- @echo FATAL: There is more than one directory in "($(SUBDIRS))"
+ @echo FATAL: There is more than two directory in "($(SUBDIRS))"
@$(EXIT_FAIL)
endif
tags: TAGS
@@ -374,19 +376,48 @@
-chmod 777 $(distdir)
@for file in $(DISTFILES); do d=$(srcdir); test -f $(distdir)/$$file || ln $$d/$$file $(distdir)/$$file 2> /dev/null || cp -p $$d/$$file $(distdir)/$$file; done; for subdir in $(SUBDIRS); do test -d $(distdir)/$$subdir || mkdir $(distdir)/$$subdir || exit 1; chmod 777 $(distdir)/$$subdir; (cd $$subdir && $(MAKE) top_distdir=../$(top_distdir)/$$subdir distdir=../$(distdir)/$$subdir distdir) || exit 1; done
$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
$(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
-info: $(INFO_DEPS) info-recursive
-dvi: $(DVIS) dvi-recursive
+info: info-recursive
+info-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+ @command.com /c if not exist doc\\nul md doc
+ @echo Making all in doc
+ $(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.info
+endif
+
+dvi: dvi-recursive
+dvi-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+ @command.com /c if not exist doc\\nul md doc
+ @echo Making all in doc
+ $(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.dvi
+endif
+
+ps: ps-recursive
+ps-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+ @command.com /c if not exist doc\\nul md doc
+ @echo Making all in doc
+ $(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.ps
+endif
+
+html-recursive:
+ifeq ($(findstring doc, $(SUBDIRS)), doc)
+ @command.com /c if not exist doc\\nul md doc
+ @echo Making all in doc
+ $(MAKE) -C doc -f ../Makefile VPATH=$(srcdir)/doc make.html
+endif
+
check: all-am check-recursive check-local
@:
installcheck: installcheck-recursive
all-recursive-am: config.h
$(MAKE) all-recursive
-all-am: Makefile $(INFO_DEPS) $(PROGRAMS) config.h
+all-am: Makefile $(PROGRAMS) config.h info
install-exec-am: install-binPROGRAMS
install-data-am: install-info-am
Index: dir.c
===================================================================
RCS file: /sources/make/make/dir.c,v
retrieving revision 1.67
diff -U 5 -r1.67 dir.c
--- dir.c 10 Oct 2007 04:32:16 -0000 1.67
+++ dir.c 15 Jan 2008 00:15:36 -0000
@@ -765,11 +765,11 @@
{
const char *bslash = strrchr(name, '\\');
if (!dirend || bslash > dirend)
dirend = bslash;
/* The case of "d:file". */
- if (!dirend && name[0] && name[1] == ':')
+ if (!dirend && HAVE_DRIVE (name))
dirend = name + 1;
}
#endif /* HAVE_DOS_PATHS */
if (dirend == 0)
#ifndef _AMIGA
@@ -825,11 +825,11 @@
{
const char *bslash = strrchr(p, '\\');
if (!dirend || bslash > dirend)
dirend = bslash;
/* The case of "d:file". */
- if (!dirend && p[0] && p[1] == ':')
+ if (!dirend && HAVE_DRIVE (p))
dirend = p + 1;
}
# endif /* HAVE_DOS_PATHS */
if (dirend == 0)
# ifdef _AMIGA
@@ -907,11 +907,11 @@
{
const char *bslash = strrchr(filename, '\\');
if (!dirend || bslash > dirend)
dirend = bslash;
/* The case of "d:file". */
- if (!dirend && filename[0] && filename[1] == ':')
+ if (!dirend && HAVE_DRIVE (filename))
dirend = filename + 1;
}
#endif /* HAVE_DOS_PATHS */
if (dirend == 0)
#ifdef _AMIGA
Index: dosbuild.bat
===================================================================
RCS file: /sources/make/make/dosbuild.bat,v
retrieving revision 1.7
diff -U 5 -r1.7 dosbuild.bat
--- dosbuild.bat 4 Jul 2007 19:35:18 -0000 1.7
+++ dosbuild.bat 15 Jan 2008 00:15:36 -0000
@@ -1,7 +1,7 @@
@echo off
-rem Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+rem Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
rem Free Software Foundation, Inc.
rem This file is part of GNU Make.
rem
rem GNU Make is free software; you can redistribute it and/or modify it under
rem the terms of the GNU General Public License as published by the Free
@@ -23,13 +23,13 @@
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g commands.c -o commands.o
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g job.c -o job.o
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g dir.c -o dir.o
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g file.c -o file.o
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g misc.c -o misc.o
-gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g main.c -o main.o
-gcc -c -I. -I./glob -DHAVE_CONFIG_H -DINCLUDEDIR=\"c:/djgpp/include\" -O2 -g read.c -o read.o
-gcc -c -I. -I./glob -DHAVE_CONFIG_H -DLIBDIR=\"c:/djgpp/lib\" -O2 -g remake.c -o remake.o
+gcc -c -I. -I./glob -DHAVE_CONFIG_H -DLOCALEDIR=\"/dev/env/DJDIR/share/locale\" -O2 -g main.c -o main.o
+gcc -c -I. -I./glob -DHAVE_CONFIG_H -DINCLUDEDIR=\"/dev/env/DJDIR/include\" -O2 -g read.c -o read.o
+gcc -c -I. -I./glob -DHAVE_CONFIG_H -DLIBDIR=\"/dev/env/DJDIR/lib\" -O2 -g remake.c -o remake.o
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g rule.c -o rule.o
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g implicit.c -o implicit.o
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g default.c -o default.o
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g variable.c -o variable.o
gcc -c -I. -I./glob -DHAVE_CONFIG_H -O2 -g expand.c -o expand.o
@@ -59,5 +59,6 @@
@echo on
gcc -o make.new @respf.$$$
@if exist make.exe echo Make.exe is now built!
@if not exist make.exe echo Make.exe build failed...
@if exist make.exe del respf.$$$
+@if exist make.exe del make.new
Index: function.c
===================================================================
RCS file: /sources/make/make/function.c,v
retrieving revision 1.104
diff -U 5 -r1.104 function.c
--- function.c 10 Oct 2007 13:22:21 -0000 1.104
+++ function.c 15 Jan 2008 00:15:40 -0000
@@ -509,20 +509,10 @@
o = variable_buffer_output (o, "simple", 6);
return o;
}
-#ifdef VMS
-# define IS_PATHSEP(c) ((c) == ']')
-#else
-# ifdef HAVE_DOS_PATHS
-# define IS_PATHSEP(c) ((c) == '/' || (c) == '\\')
-# else
-# define IS_PATHSEP(c) ((c) == '/')
-# endif
-#endif
-
static char *
func_notdir_suffix (char *o, char **argv, const char *funcname)
{
/* Expand the argument. */
@@ -553,11 +543,11 @@
continue;
o = variable_buffer_output (o, p, len - (p - p2));
}
#ifdef HAVE_DOS_PATHS
/* Handle the case of "d:foo/bar". */
- else if (streq (funcname, "notdir") && p2[0] && p2[1] == ':')
+ else if (streq (funcname, "notdir") && HAVE_DRIVE (p2))
{
p = p2 + 2;
o = variable_buffer_output (o, p, len - (p - p2));
}
#endif
@@ -605,11 +595,11 @@
o = variable_buffer_output (o, p2, ++p - p2);
else if (p >= p2 && (*p == '.'))
o = variable_buffer_output (o, p2, p - p2);
#ifdef HAVE_DOS_PATHS
/* Handle the "d:foobar" case */
- else if (p2[0] && p2[1] == ':' && is_dir)
+ else if (HAVE_DRIVE (p2) && is_dir)
o = variable_buffer_output (o, p2, 2);
#endif
else if (is_dir)
#ifdef VMS
o = variable_buffer_output (o, "[]", 2);
@@ -1882,19 +1872,39 @@
`..' components nor any repeated path separators ('/'). */
static char *
abspath (const char *name, char *apath)
{
+#ifdef HAVE_DOS_PATHS
+# undef IS_PATHSEP
+# define IS_PATHSEP(c) ((c) == '/' || (c) == '\\' || (c) == ':')
+#endif
+
char *dest;
const char *start, *end, *apath_limit;
if (name[0] == '\0' || apath == NULL)
return NULL;
apath_limit = apath + GET_PATH_MAX;
- if (name[0] != '/')
+#ifdef HAVE_DOS_PATHS
+ if (HAVE_DRIVE (name)) /* DOS-style drive letter? */
+ {
+ strncpy (apath, name, 2);
+ dest = apath + 2;
+ name += 2;
+ if (IS_PATHSEP (*name))
+ {
+ name++;
+ *dest++ = '/';
+ }
+ *dest = '\0';
+ }
+ else
+#endif
+ if (!IS_PATHSEP (name[0]))
{
/* It is unlikely we would make it until here but just to make sure. */
if (!starting_directory)
return NULL;
@@ -1911,15 +1921,15 @@
for (start = end = name; *start != '\0'; start = end)
{
unsigned long len;
/* Skip sequence of multiple path-separators. */
- while (*start == '/')
+ while (IS_PATHSEP (*start))
++start;
/* Find end of path component. */
- for (end = start; *end != '\0' && *end != '/'; ++end)
+ for (end = start; *end != '\0' && !IS_PATHSEP (*end); ++end)
;
len = end - start;
if (len == 0)
@@ -1927,16 +1937,20 @@
else if (len == 1 && start[0] == '.')
/* nothing */;
else if (len == 2 && start[0] == '.' && start[1] == '.')
{
/* Back up to previous component, ignore if at root already. */
- if (dest > apath + 1)
- while ((--dest)[-1] != '/');
+ if (dest > apath + 1
+#ifdef HAVE_DOS_PATHS
+ && (apath[1] != ':' || dest > apath + 2 + IS_PATHSEP (apath[2]))
+#endif
+ )
+ while (--dest, (!IS_PATHSEP (dest[-1])));
}
else
{
- if (dest[-1] != '/')
+ if (!IS_PATHSEP (dest[-1]))
*dest++ = '/';
if (dest + len >= apath_limit)
return NULL;
@@ -1945,16 +1959,24 @@
*dest = '\0';
}
}
/* Unless it is root strip trailing separator. */
- if (dest > apath + 1 && dest[-1] == '/')
+ if (dest > apath + 1 && IS_PATHSEP (dest[-1])
+#ifdef HAVE_DOS_PATHS
+ && (dest > apath + 3 || dest[-3] == ':')
+#endif
+ )
--dest;
*dest = '\0';
return apath;
+#ifdef HAVE_DOS_PATHS
+# undef IS_PATHSEP
+# define IS_PATHSEP(c) ((c) == '/' || (c) == '\\')
+#endif
}
static char *
func_realpath (char *o, char **argv, const char *funcname UNUSED)
Index: hash.c
===================================================================
RCS file: /sources/make/make/hash.c,v
retrieving revision 2.7
diff -U 5 -r2.7 hash.c
--- hash.c 4 Jul 2007 19:35:18 -0000 2.7
+++ hash.c 15 Jan 2008 00:15:40 -0000
@@ -319,11 +319,11 @@
n |= (n >> 2);
n |= (n >> 4);
n |= (n >> 8);
n |= (n >> 16);
-#if !defined(HAVE_LIMITS_H) || ULONG_MAX > 4294967295
+#if !defined(HAVE_LIMITS_H) || ULONG_MAX > 4294967295U
/* We only need this on systems where unsigned long is >32 bits. */
n |= (n >> 32);
#endif
return n + 1;
Index: implicit.c
===================================================================
RCS file: /sources/make/make/implicit.c,v
retrieving revision 1.66
diff -U 5 -r1.66 implicit.c
--- implicit.c 4 Jul 2007 19:35:19 -0000 1.66
+++ implicit.c 15 Jan 2008 00:15:42 -0000
@@ -192,11 +192,11 @@
/* Length of FILENAME. */
unsigned int namelen = strlen (filename);
/* The last slash in FILENAME (or nil if there is none). */
- char *lastslash;
+ const char *lastslash;
/* This is a file-object used as an argument in
recursive calls. It never contains any data
except during a recursive call. */
struct file *intermediate_file = 0;
@@ -272,11 +272,11 @@
and the case of "d:file". */
{
char *bslash = strrchr (filename, '\\');
if (lastslash == 0 || bslash > lastslash)
lastslash = bslash;
- if (lastslash == 0 && filename[0] && filename[1] == ':')
+ if (lastslash == 0 && HAVE_DRIVE (filename))
lastslash = filename + 1;
}
#endif
#endif
if (lastslash != 0 && lastslash[1] == '\0')
@@ -339,11 +339,11 @@
#ifdef HAVE_DOS_PATHS
/* Didn't find it yet: check for DOS-type directories. */
if (check_lastslash)
{
char *b = strchr (target, '\\');
- check_lastslash = !(b || (target[0] && target[1] == ':'));
+ check_lastslash = !(b || HAVE_DRIVE (target));
}
#endif
#endif
}
if (check_lastslash)
Index: make.h
===================================================================
RCS file: /sources/make/make/make.h,v
retrieving revision 1.131
diff -U 5 -r1.131 make.h
--- make.h 4 Nov 2007 21:54:01 -0000 1.131
+++ make.h 15 Jan 2008 00:15:43 -0000
@@ -308,14 +308,18 @@
/* Handle other OSs. */
#ifndef PATH_SEPARATOR_CHAR
# if defined(HAVE_DOS_PATHS)
# define PATH_SEPARATOR_CHAR ';'
+# define IS_PATHSEP(c) ((c) == '/' || (c) == '\\')
+# define HAVE_DRIVE(n) ((n)[0] && (n)[1] == ':')
# elif defined(VMS)
# define PATH_SEPARATOR_CHAR ','
+# define IS_PATHSEP(c) ((c) == ']')
# else
# define PATH_SEPARATOR_CHAR ':'
+# define IS_PATHSEP(c) ((c) == '/')
# endif
#endif
/* This is needed for getcwd() and chdir(), on some W32 systems. */
#if defined(HAVE_DIRECT_H)
Index: glob/glob.c
===================================================================
RCS file: /sources/make/make/glob/glob.c,v
retrieving revision 1.28
diff -U 5 -r1.28 glob.c
--- glob/glob.c 22 Dec 2007 11:28:49 -0000 1.28
+++ glob/glob.c 15 Jan 2008 00:15:45 -0000
@@ -180,21 +180,18 @@
# define HAVE_MEMPCPY 1
# undef mempcpy
# define mempcpy(Dest, Src, Len) __mempcpy (Dest, Src, Len)
#endif
-#ifndef __GNU_LIBRARY__
+#if !defined __GNU_LIBRARY__ && !defined __DJGPP__
# ifdef __GNUC__
__inline
# endif
# ifndef __SASC
# ifdef WINDOWS32
static void *
my_realloc (void *p, unsigned int n)
-# elif defined(__DJGPP__)
-static void *
-my_realloc (void *p, size_t n)
# else
static char *
my_realloc (p, n)
char *p;
unsigned int n;
@@ -206,11 +203,11 @@
return (char *) malloc (n);
return (char *) realloc (p, n);
}
# define realloc my_realloc
# endif /* __SASC */
-#endif /* __GNU_LIBRARY__ */
+#endif /* __GNU_LIBRARY__ || __DJGPP__ */
#if !defined __alloca && !defined __GNU_LIBRARY__
# ifdef __GNUC__
Index: tests/scripts/functions/abspath
===================================================================
RCS file: /sources/make/make/tests/scripts/functions/abspath,v
retrieving revision 1.2
diff -U 5 -r1.2 abspath
--- tests/scripts/functions/abspath 29 Aug 2005 14:11:01 -0000 1.2
+++ tests/scripts/functions/abspath 15 Jan 2008 00:15:46 -0000
@@ -75,7 +75,119 @@
',
'',
'');
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ #
+ # Some DOS specific tests that are supported
+ # only by the DJGPP port of make.
+ #
+ # For every unix-style test case up to three more are
+ # added to test for paths with backslash instead slash
+ # as directory separator; to test for paths with mixed
+ # backslash and slash as dir separator and to test for
+ # paths with a drive letter prepended.
+ #
+
+$description = "Test the abspath functions with DOS path syntax.";
+
+$details = "";
+
+run_make_test('
+ifneq ($(realpath $(abspath .\)),$(CURDIR))
+ $(warning .\: abs="$(abspath .\)" real="$(realpath $(abspath .\))" curdir="$(CURDIR)")
+endif
+
+ifneq ($(realpath $(abspath .\\\)),$(CURDIR))
+ $(warning .\\\: abs="$(abspath .\\\)" real="$(realpath $(abspath .\\\))" curdir="$(CURDIR)")
+endif
+
+ifneq ($(abspath \),/)
+ $(warning \: abspath="$(abspath \)")
+endif
+
+ifneq ($(abspath \\\\\\),/)
+ $(warning \\\\\\: abspath="$(abspath \\\\\\)")
+endif
+
+ifneq ($(abspath \\.),/)
+ $(warning \\.: abspath="$(abspath \\.)")
+endif
+
+ifneq ($(abspath ///.),/)
+ $(warning ///.: abspath="$(abspath ///.)")
+endif
+
+ifneq ($(abspath \\./),/)
+ $(warning \\./: abspath="$(abspath \\./)")
+endif
+
+ifneq ($(abspath \\.///),/)
+ $(warning \\.///: abspath="$(abspath \\.///)")
+endif
+
+ifneq ($(abspath \\..),/)
+ $(warning \\..: abspath="$(abspath \\..)")
+endif
+
+ifneq ($(abspath //\\..),/)
+ $(warning //\\..: abspath="$(abspath //\\..)")
+endif
+
+ifneq ($(abspath \\../),/)
+ $(warning \\../: abspath="$(abspath \\../)")
+endif
+
+ifneq ($(abspath \\..///),/)
+ $(warning \\..///: abspath="$(abspath \\..///)")
+endif
+
+
+ifneq ($(abspath \\foo\\bar\\..),/foo)
+ $(warning \\foo\\bar\\..: abspath="$(abspath \\foo\\bar\\..)")
+endif
+
+ifneq ($(abspath a:\\foo\\bar\\..),a:/foo)
+ $(warning a:\\foo\\bar\\..: abspath="$(abspath a:\\foo\\bar\\..)")
+endif
+
+ifneq ($(abspath a:foo\\bar\\..),a:foo)
+ $(warning a:foo\\bar\\..: abspath="$(abspath a:foo\\bar\\..)")
+endif
+
+ifneq ($(abspath \\foo\\bar\\..\\..\\..\\baz),/baz)
+ $(warning \\foo\\bar\\..\\..\\..\\baz: abspath="$(abspath \\foo\\bar\\..\\..\\..\\baz)")
+endif
+
+ifneq ($(abspath a:\\foo\\bar\\..\\..\\..\\baz),a:/baz)
+ $(warning a:\\foo\\bar\\..\\..\\..\\baz: abspath="$(abspath a:\\foo\\bar\\..\\..\\..\\baz)")
+endif
+
+ifneq ($(abspath a:foo\\bar\\..\\..\\..\\baz),a:baz)
+ $(warning a:foo\\bar\\..\\..\\..\\baz: abspath="$(abspath a:foo\\bar\\..\\..\\..\\baz)")
+endif
+
+ifneq ($(abspath \\foo\\bar\\..\\ \\..),/foo /)
+ $(warning \\foo\\bar\\..\\ \\..: abspath="$(abspath \\foo\\bar\\..\\ \\..)")
+endif
+
+ifneq ($(abspath a:\\foo\\bar\\..\\ a:\\..),a:/foo a:/)
+ $(warning a:\\foo\\bar\\..\\ a:\\..: abspath="$(abspath a:\\foo\\bar\\..\\ a:\\..)")
+endif
+
+ifneq ($(abspath a:foo\\bar\\..\\ a:..),a:foo a:)
+ $(warning a:foo\\bar\\..\\ a:..: abspath="$(abspath a:foo\\bar\\..\\ a:..)")
+endif
+
+.PHONY: all
+all: ; @:
+',
+'',
+'');
+
+ }
+}
+
# This tells the test driver that the perl test script executed properly.
1;
Index: tests/scripts/options/dash-B
===================================================================
RCS file: /sources/make/make/tests/scripts/options/dash-B,v
retrieving revision 1.4
diff -U 5 -r1.4 dash-B
--- tests/scripts/options/dash-B 25 Jun 2005 18:57:28 -0000 1.4
+++ tests/scripts/options/dash-B 15 Jan 2008 00:15:46 -0000
@@ -36,19 +36,31 @@
rmfiles('bar.x', 'foo');
# Test -B with the re-exec feature: we don't want to re-exec forever
# Savannah bug # 7566
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ #
+ # If compiled with DJGPP an error message (ENOENT) is issued.
+ #
+ $error_message = '(ENOENT)';
+ }
+}
+else {
+ $error_message = '';
+}
+
run_make_test('
all: ; @:
$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
include foo.x
foo.x: ; @touch $@
',
- '-B', 'MAKE_RESTARTS=
-#MAKEFILE#:4: foo.x: No such file or directory
-MAKE_RESTARTS=1');
+ '-B', "MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory $error_message
+MAKE_RESTARTS=1");
rmfiles('foo.x');
# Test -B with the re-exec feature: we DO want -B in the "normal" part of the
# makefile.
@@ -60,14 +72,14 @@
$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
include foo.x
foo.x: ; @touch $@
blah.x: ; @echo $@
',
- '-B', 'MAKE_RESTARTS=
-#MAKEFILE#:4: foo.x: No such file or directory
+ '-B', "MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory $error_message
MAKE_RESTARTS=1
blah.x
-all');
+all");
rmfiles('foo.x', 'blah.x');
1;
Index: tests/scripts/options/dash-W
===================================================================
RCS file: /sources/make/make/tests/scripts/options/dash-W,v
retrieving revision 1.5
diff -U 5 -r1.5 dash-W
--- tests/scripts/options/dash-W 8 Mar 2006 20:15:09 -0000 1.5
+++ tests/scripts/options/dash-W 15 Jan 2008 00:15:46 -0000
@@ -31,24 +31,36 @@
# Test -W with the re-exec feature: we don't want to re-exec forever
# Savannah bug # 7566
# First set it up with a normal build
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ #
+ # If compiled with DJGPP an error message (ENOENT) is issued.
+ #
+ $error_message = '(ENOENT)';
+ }
+}
+else {
+ $error_message = '';
+}
+
run_make_test('
all: baz.x ; @:
include foo.x
foo.x: bar.x
@echo "\$$(info restarts=\$$(MAKE_RESTARTS))" > $@
@echo "touch $@"
bar.x: ; echo >> $@
baz.x: bar.x ; @echo "touch $@"
',
- '', '#MAKEFILE#:3: foo.x: No such file or directory
+ '', "#MAKEFILE#:3: foo.x: No such file or directory $error_message
echo >> bar.x
touch foo.x
restarts=1
-touch baz.x');
+touch baz.x");
# Now run with -W bar.x
# Tweak foo.x's timestamp so the update will change it.
&utouch(1000, 'foo.x');
Index: tests/scripts/options/dash-k
===================================================================
RCS file: /sources/make/make/tests/scripts/options/dash-k,v
retrieving revision 1.3
diff -U 5 -r1.3 dash-k
--- tests/scripts/options/dash-k 16 May 2004 19:16:56 -0000 1.3
+++ tests/scripts/options/dash-k 15 Jan 2008 00:15:46 -0000
@@ -98,16 +98,28 @@
&compare_output($answer, &get_logfile(1));
# TEST -- make sure we keep the error code if we can't create an included
# makefile.
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ #
+ # If compiled with DJGPP an error message (ENOENT) is issued.
+ #
+ $error_message = '(ENOENT)';
+ }
+}
+else {
+ $error_message = '';
+}
+
run_make_test('all: ; @echo hi
include ifile
ifile: no-such-file; @false
',
'-k',
- "#MAKEFILE#:2: ifile: No such file or directory
+ "#MAKEFILE#:2: ifile: No such file or directory $error_message
#MAKE#: *** No rule to make target `no-such-file', needed by `ifile'.
#MAKE#: Failed to remake makefile `ifile'.
hi\n",
512);
Index: tests/scripts/targets/SECONDARY
===================================================================
RCS file: /sources/make/make/tests/scripts/targets/SECONDARY,v
retrieving revision 1.6
diff -U 5 -r1.6 SECONDARY
--- tests/scripts/targets/SECONDARY 15 Aug 2007 13:53:54 -0000 1.6
+++ tests/scripts/targets/SECONDARY 15 Jan 2008 00:15:47 -0000
@@ -119,10 +119,14 @@
all: version2',
'all', 'GOOD');
unlink('version2');
+if (!$parallel_jobs) {
+ return 1;
+}
+
# TEST #9 -- Savannah bug #15919
# The original fix for this bug caused a new bug, shown here.
touch(qw(1.a 2.a));
Index: tests/scripts/variables/MAKE_RESTARTS
===================================================================
RCS file: /sources/make/make/tests/scripts/variables/MAKE_RESTARTS,v
retrieving revision 1.1
diff -U 5 -r1.1 MAKE_RESTARTS
--- tests/scripts/variables/MAKE_RESTARTS 25 Jun 2005 18:57:28 -0000 1.1
+++ tests/scripts/variables/MAKE_RESTARTS 15 Jan 2008 00:15:47 -0000
@@ -2,19 +2,31 @@
$description = "Test the MAKE_RESTARTS variable.";
# Test basic capability
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ #
+ # If compiled with DJGPP an error message (ENOENT) is issued.
+ #
+ $error_message = '(ENOENT)';
+ }
+}
+else {
+ $error_message = '';
+}
+
run_make_test('
all: ; @:
$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
include foo.x
foo.x: ; @touch $@
',
- '', 'MAKE_RESTARTS=
-#MAKEFILE#:4: foo.x: No such file or directory
-MAKE_RESTARTS=1');
+ '', "MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory $error_message
+MAKE_RESTARTS=1");
rmfiles('foo.x');
# Test multiple restarts
@@ -23,15 +35,15 @@
$(info MAKE_RESTARTS=$(MAKE_RESTARTS))
include foo.x
foo.x: ; @echo "include bar.x" > $@
bar.x: ; @touch $@
',
- '', 'MAKE_RESTARTS=
-#MAKEFILE#:4: foo.x: No such file or directory
+ '', "MAKE_RESTARTS=
+#MAKEFILE#:4: foo.x: No such file or directory $error_message
MAKE_RESTARTS=1
-foo.x:1: bar.x: No such file or directory
-MAKE_RESTARTS=2');
+foo.x:1: bar.x: No such file or directory $error_message
+MAKE_RESTARTS=2");
rmfiles('foo.x', 'bar.x');
# Test multiple restarts and make sure the variable is cleaned up
@@ -45,13 +57,13 @@
include foo.x
foo.x: ; @echo "include bar.x" > $@
bar.x: ; @touch $@
',
'', "MAKE_RESTARTS=
-#MAKEFILE#:8: foo.x: No such file or directory
+#MAKEFILE#:8: foo.x: No such file or directory $error_message
MAKE_RESTARTS=1
-foo.x:1: bar.x: No such file or directory
+foo.x:1: bar.x: No such file or directory $error_message
MAKE_RESTARTS=2
recurse MAKE_RESTARTS=
MAKE_RESTARTS=
#MAKE#[1]: Entering directory `#PWD#'
all MAKE_RESTARTS=
Index: tests/scripts/variables/SHELL
===================================================================
RCS file: /sources/make/make/tests/scripts/variables/SHELL,v
retrieving revision 1.4
diff -U 5 -r1.4 SHELL
--- tests/scripts/variables/SHELL 25 Aug 2005 04:40:11 -0000 1.4
+++ tests/scripts/variables/SHELL 15 Jan 2008 00:15:47 -0000
@@ -1,9 +1,15 @@
# -*-perl-*-
$description = "Test proper handling of SHELL.";
+if ($port_type eq "DOS") {
+ if (exists $ENV{DJDIR}) {
+ return -1;
+ }
+}
+
# Find the default value when SHELL is not set. On UNIX it will be /bin/sh,
# but on other platforms who knows?
resetENV();
delete $ENV{SHELL};
$mshell = `echo 'all:;\@echo \$(SHELL)' | $make_path -f-`;
- Raw text -