From:	eplmst AT lu DOT erisoft DOT se (Martin Stromberg)
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: DJGPP install on Windows ME
Date:	13 Sep 2002 06:39:46 GMT
Organization:	Ericsson Erisoft AB, Sweden
Lines:	41
Message-ID:	<als17i$obc$1@antares.lu.erisoft.se>
References:	<alctkr$557$1 AT ctb-nnrp2 DOT saix DOT net> <dgrf9.16568$ip3 DOT 1092237 AT twister DOT southeast DOT rr DOT com> <alqhcr$712$1 AT ctb-nnrp2 DOT saix DOT net>
NNTP-Posting-Host:	lws256.lu.erisoft.se
X-Newsreader:	TIN [version 1.2 PL2]
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

Mario SA (mario AT butoi DOT cjb DOT net) wrote:
:          I have tried to add only "C:\DJGPP\BIN" leaving out %PATH% ,but
: Rhide still gives me the following error message -" Rhide has detected, that
: the environment variable DJDIR has not been set <or not correct>. This is a
: fatal mistake. For information about fixing this, please read the File
: README.1ST from the DJGPP distribution. <about setting the DJGPP environment
: variable!!!> Should I continue ? "- If I click continue Rhide once again
: let's me know that the environment variable 'DJDIR' has not been set - DJGPP
: is not correctly installed , I will probably get many more errors ! Here is
: a list with all set parameters which my windows has already (order
: preserved)

: Variable                                     Value
: ---------                                    ------
: PATH                      C:\WINDOWS;C:\WINDOWS\COMMAND
                           ^^
Here you should add "C:\DJGPP\BIN;".

: BLASTER               A220 I7 D1 H7 P330  T6
: CTSYN                   C:\WINDOWS
: PROMPT                $p$g
: TEMP                      C:\WINDOWS\TEMP
: TMP                        C:\WINDOWS\TEMP
: CLASSPATH          C:\PROGRA~1\PHOTOD~1.0\ADOBEC~1
: DGJPP                     C:\DJGPP\DJGPP.ENV
  ^^^^^
This should be "DJGPP". (Swap the G and the J.)

: There is also this message which comes up every time I am opening the
: environment variables editor ( run start>msconfig>edit). I don't know if is
: important .It goes like this : HEADING - System Configuration Utility - .
: MESSAGE BODY - Environment variables were found in the legacy files
: AUTOEXEC.BAT and/or CONFIG.SYS and the variables were moved to the Windows
: Registry.-

That's how it usually is on WME, IIRC, and what you want.


Right,

						MartinS

- Raw text -