Newsgroups:	comp.os.msdos.djgpp
From:	elj AT sky1 DOT elj DOT org (Edwin Johnson)
Subject:	Re: Interrupt handled RS232
References:	<slrn9u2jt7 DOT se DOT elj AT sky1 DOT elj DOT org> <3be260ae$1$246$bb624dac AT diablo DOT uninet DOT ee>
Message-ID:	<slrn9u4l4o.1v1.elj@sky1.elj.org>
Mime-Version:	1.0
User-Agent:	slrn/0.9.7.0 (Linux)
NNTP-Posting-Host:	32.100.53.227
Date:	2 Nov 2001 14:05:27 GMT
X-Trace:	2 Nov 2001 14:05:27 GMT, 32.100.53.227
Organization:	Global Network Services - Remote Access Mail & News Services
Lines:	27
X-Complaints-To:	abuse AT prserv DOT net
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

Yes, in fact that is one of the registers I passed back to C to make sure it
was set. ...Edwin

On Fri, 2 Nov 2001 10:59:07 +0200, Tonu Aas <tonu AT ids DOT ee> wrote:
>> The setup sequence is to first set the new ISR vectors, set up the uart,
> and
>> then unmask the interrupt chip bit for the correct interrupt.
> 
> Have you activated OUT2 on UART ?
> This bit enables UART interrupt into motherboard.
> 
> Tõnu.
> 
> 


-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~   Edwin Johnson ....... elj AT shreve DOT net  ~
~        http://www.shreve.net/~elj       ~
~                                         ~
~ "Once you have flown, you will walk the ~
~ earth with your eyes turned skyward,    ~
~ for there you have been, there you long ~
~ to return." -- da Vinci                 ~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

- Raw text -