From:	"Henri P. Gavin" <hpgavin AT duke DOT edu>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Hardware Register Programming Win2000
Date:	10 Aug 2001 19:43:31 GMT
Organization:	Duke University, Durham, NC, USA
Lines:	12
Message-ID:	<9l1dh3$9md$1@news.duke.edu>
NNTP-Posting-Host:	godzilla2.acpub.duke.edu
User-Agent:	tin/1.4.5-20010409 ("One More Nightmare") (UNIX) (SunOS/5.6 (sun4m))
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

Hello, 
I have a DJGPP-compiled hardware driver working fine under Win98/DOS.
I have tried to re-compile under Win2000 and appear to be unable to
write to the hardware registers.   This is a PCI Bus card, and we
get the Base Addresses from the hardware device manager, as we did
under Win98.  In general DJGPP appears to compile the code, except
for the inportb, inportw, outportw, and outportb commands.  

Thanks in advance for any help/advice.

Henri Gavin  and Jesse Hoagg   hpgavin AT duke DOT edu   jbh8 AT duke DOT edu

- Raw text -