From:	"Jacek K." <xos AT o2 DOT pl>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: Accessing registers from C
Date:	Wed, 4 Jul 2001 01:44:25 +0200
Organization:	tp.internet - http://www.tpi.pl
Lines:	19
Message-ID:	<9htlpv$o5t$1@news.tpi.pl>
References:	<Pine DOT SUN DOT 3 DOT 91 DOT 1010702091418 DOT 3012G-100000 AT is>
NNTP-Posting-Host:	pe30.gdansk.cvx.ppp.tpnet.pl
X-Trace:	news.tpi.pl 994204287 24765 213.76.28.30 (3 Jul 2001 23:51:27 GMT)
X-Complaints-To:	usenet AT tpi DOT pl
NNTP-Posting-Date:	3 Jul 2001 23:51:27 GMT
X-Newsreader:	Microsoft Outlook Express 5.50.4133.2400
X-MSMail-Priority:	Normal
X-Priority:	3
X-MimeOLE:	Produced By Microsoft MimeOLE V5.50.4133.2400
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

Uzytkownik "Eli Zaretskii" <eliz AT is DOT elta DOT co DOT il> napisal w wiadomosci
news:Pine DOT SUN DOT 3 DOT 91 DOT 1010702091418 DOT 3012G-100000 AT is...
>
> On Sun, 1 Jul 2001, Jacek K. wrote:
>
> > Are there some instructions/macros to access CPU registers?
>
> Can you tell what do you need that for?  DJGPP has several provisions
> in the library which normally make accessing the registers
> unnecessary.  Section 17.8 of the FAQ gives a couple of examples.

I need to call a procedure via call gate. Because arguments must be passed
"manualy", doing it by registers will be faster then by stack.

Jacek

- Raw text -