From:	gdemont AT my-deja DOT com
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: Fine timing
Date:	Fri, 13 Oct 2000 12:17:11 GMT
Organization:	Deja.com - Before you buy.
Lines:	30
Message-ID:	<8s6ug4$ebr$1@nnrp1.deja.com>
References:	<8s4ini$g3i$1 AT nnrp1 DOT deja DOT com> <7458-Thu12Oct2000175507+0300-eliz AT is DOT elta DOT co DOT il>
NNTP-Posting-Host:	130.125.13.32
X-Article-Creation-Date:	Fri Oct 13 12:17:11 2000 GMT
X-Http-User-Agent:	Mozilla/4.75 (Macintosh; U; PPC)
X-Http-Proxy:	1.0 x63.deja.com:80 (Squid/1.1.22) for client 130.125.13.32
X-MyDeja-Info:	XMYDJUIDgdemont
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

> > A small question: is a "middle" frequency timer
> > available from djgpp run-time (say ~1Khz, i.e. a bit
> > more than the 18.2 Hz of DOS)

Eli:

> Did you consider the CMOS real-time-clock timer?  It runs at 1024Hz by
> default and triggers Int 70h on IRQ8 (IIRC).

By default ? This is very good news!!

> By default, this clock's
> interrupt is disabled, but you can enable it by writing appropriate
> values into port 70h.

Nice! And is it possible to read the 1024ths of second from port 70h
without using an interrupt ? In that case it would simplify dramatically
things. For the moment I program the PIT, take Int 8 and repair the BIOS
time that would go wrong otherwise by reading the values from port 70h!
I works, but is not so nice and needs not forgetting to reset the
normal state a the end - especially when an unhandled Ada exception
has occured.
Anyway, thank you very much, I'll see on that side!

Gautier


Sent via Deja.com http://www.deja.com/
Before you buy.

- Raw text -