From:	andyclifton AT cs DOT comNOSPAM (Andrew Clifton)
Newsgroups:	comp.os.msdos.djgpp
Subject:	Problems with dual display in RHIDE
Lines:	14
NNTP-Posting-Host:	ladder07.news.cs.com
X-Admin:	news AT cs DOT com
Date:	13 Sep 2000 01:12:26 GMT
Organization:	CompuServe (http://www.compuserve.com/)
Message-ID:	<20000912211226.16940.00001107@ng-fl1.news.cs.com>
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

Greetings,
I am tring to get RHIDE to run with two monitors. I installed an old Herc card
in my PC, and RHIDE detects it, but nothing ever gets sent to the mono monitor.
When I type MODE MONO my mono monitor remains blank, my SVGA monitor freezes
except for the cursor, which still moves as if it were displaying stuff. I
checked to make sure that EMM386 wasn't using the memory that the Herc card
uses, I check to see if my video card (a TVGA9860 PCI) had an option for 8-bit
mode (I read somewhere that it might need to be set), I checked the setting in
my BIOS. Nothing works. There are some jumpers on the Herc card itself... When
I run MSD it sees the Hercules card as a secondary adapter. Anybody have any
ideas? 

Andrew Clifton
andyclifton "AT" cs.com

- Raw text -