From:	Hans-Bernhard Broeker <broeker AT physik DOT rwth-aachen DOT de>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: "GRX is not supported on your COMPILER/CPU/.."
Date:	22 Aug 2000 13:32:59 GMT
Organization:	Aachen University of Technology (RWTH)
Lines:	23
Message-ID:	<8ntveb$oj5$1@nets3.rz.RWTH-Aachen.DE>
References:	<39A23AED DOT F81B1DE4 AT siemens DOT at>
NNTP-Posting-Host:	acp3bf.physik.rwth-aachen.de
X-Trace:	nets3.rz.RWTH-Aachen.DE 966951179 25189 137.226.32.75 (22 Aug 2000 13:32:59 GMT)
X-Complaints-To:	abuse AT rwth-aachen DOT de
NNTP-Posting-Date:	22 Aug 2000 13:32:59 GMT
Originator:	broeker@
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

Martin Alt <martin DOT alt AT siemens DOT at> wrote:
> I thing that is because the __GNUC__ define is never defined, but where
> this should be?

That's not the problem. GCC #define's __GNUC__ automatically, all by
itself.

> Do I using the wrong GNUC (my is installed to \EMX)?

Probably yes. EMX is a port of GNU C to OS/2, which also works on
DOS. DJGPP, which this newsgroup and the makefile.dj2 you used is
about, is a native DOS port of GNU C. So you're at least using the
wrong makefile, but more likely the wrong GNU C.

> The SW I have to compile is made with GRX20, is this a problem? 

No.



-- 
Hans-Bernhard Broeker (broeker AT physik DOT rwth-aachen DOT de)
Even if all the snow were burnt, ashes would remain.

- Raw text -