From:	Richard Dawe <richdawe AT bigfoot DOT com>
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: netbd.h, sockets.h, in.h and types.h don't work
Date:	Tue, 30 May 2000 20:03:44 +0100
Organization:	Customer of Planet Online
Lines:	25
Message-ID:	<39341090.BBDB4746@bigfoot.com>
References:	<Pine DOT SUN DOT 3 DOT 91 DOT 1000529101954 DOT 24119G-100000-100000 AT is> <8gvdr0$a4i$2 AT bob DOT news DOT rcn DOT net>
NNTP-Posting-Host:	modem-157.chlorine.dialup.pol.co.uk
Mime-Version:	1.0
X-Trace:	newsg1.svr.pol.co.uk 959716348 5977 62.136.16.157 (30 May 2000 19:52:28 GMT)
NNTP-Posting-Date:	30 May 2000 19:52:28 GMT
X-Complaints-To:	abuse AT theplanet DOT net
X-Mailer:	Mozilla 4.51 [en] (X11; I; Linux 2.2.14 i586)
X-Accept-Language:	de,fr
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

Hello.

Chris Lee wrote:
> 
> Eli Zaretskii wrote:
>
> > Note that, to have TCP/IP on DOS, you will typically need a device
> > driver or a TSR for whatever hardware you use to access the physical
> > layer.
> 
> Look for dosppp06.zip on simtelnet.

That's fine if your using a dial-up link, but what about Ethernet cards,
etc.? Answer, you need a packet driver from the Crynwr or from the driver
set you get with your network card. Crynwr drivers are here:

http://www.crynwr.com/

There are four ZIP files if memory serves correctly.

Bye,

-- 
Richard Dawe
richdawe AT bigfoot DOT com ICQ 47595498 http://www.bigfoot.com/~richdawe/

- Raw text -