From:	"Groman" <groman AT thehelm DOT com>
Newsgroups:	alt.os.development,alt.lang.asm,comp.os.msdos.djgpp,alt.os.assembly
References:	<CXMe4.467$YK4 DOT 12132 AT nnrp3-w DOT snfc21 DOT pbi DOT net>
Subject:	Re: Having troubles with IDT/IRQ0
Lines:	77
X-Priority:	3
X-MSMail-Priority:	Normal
X-Newsreader:	Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE:	Produced By Microsoft MimeOLE V5.00.2314.1300
Message-ID:	<_1Qe4.581$6Q4.15708@nnrp2-w.snfc21.pbi.net>
Date:	Tue, 11 Jan 2000 16:38:32 -0800
NNTP-Posting-Host:	206.170.6.189
X-Complaints-To:	abuse AT pacbell DOT net
X-Trace:	nnrp2-w.snfc21.pbi.net 947637498 206.170.6.189 (Tue, 11 Jan 2000 16:38:18 PST)
NNTP-Posting-Date:	Tue, 11 Jan 2000 16:38:18 PST
Organization:	SBC Internet Services
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

sorry, forgot to mention:

#define _pack __attribute__ ((packed))



Groman <groman AT thehelm DOT com> wrote in message
news:CXMe4.467$YK4 DOT 12132 AT nnrp3-w DOT snfc21 DOT pbi DOT net...
> Could somebody please tell me if the following bits and pieces are correct
> and do what I want(99% chance the problem is elseware, but I want to make
> sure
> these pieces are which work)
> I've been starring into this code for about 16 hours now, and I think I am
> missing something obvious:
> The computer reboots as soon as I enable the interrupts(IRQs are shifted
to
> 0x20 and are all masked but 0x2 and 0x0(code from Linux 2.0 source))
>
> Bochs panics saying
> interrupt(): gate descriptor is not valid sys seg
>
>
>
> I am using djgpp with nasm...
>
>
> is this a correct IDT entry?
> struct IDTDesc
> {
>  unsigned short  OffSet1 _pack;    // Offset
>  unsigned short  Selector1 _pack;  // Segment selector
>  unsigned short  Flags _pack;      // Flags
>  unsigned short  OffSet2 _pack;    // Rest of the offset
> } _pack;
>
> is this the correct way to setup the IDT(statically)
>
> IDTDesc IDT[256];
>
>
> is this the correct way to change interrupt 0x20 to handler IRQ0Handler:
>
>  unsigned long int offset = (unsigned int)(void *)&IRQ0Handler;
>  DisableInt();
>
>  IDT[0x20].OffSet1 = (offset&0xFFFF);
>  IDT[0x20].OffSet2 = (offset>>16);
>  IDT[0x20].Flags   =  0x8E00;
>  IDT[0x20].Selector1 = 0x8;
>
> will this work as an interrupt handler?
>
> _IRQ0Handler:
>  push eax
>  push edx
>
>
>  mov dx,0x20
>  mov al,0x20
>  out dx,al
>
>  inc word [0xb8000]
>
>  pop edx
>  pop eax
>  iret
>
> sincerely, groman
>
> thank you in advance.
>
>
>
>
>

- Raw text -