From:	"sl" <junk AT bbs DOT darktech DOT org>
Newsgroups:	comp.os.msdos.djgpp
Subject:	VESA 1.2, cannot get current video mode!
Date:	Wed, 29 Dec 1999 17:22:45 -0500 (EST)
Organization:	Posted via Supernews, http://www.supernews.com
Lines:	29
Message-ID:	<fyoofqnexgrpubet.fniwtx0.pminews@nntp.generation.net>
X-Complaints-To:	newsabuse AT supernews DOT com
X-Newsreader:	PMINews 2.00.1205 For OS/2
MIME-Version:	1.0
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

Hi,

	Using the VESA 1.2 specification (I also double checked using the MS
DOS interrupt list) I wrote up the following function.. Unfortunately, on my
system, this call ALWAYS returns regs.h.al=79 instead of regs.h.al=0 which
would indicate no error has occured.

--------function follows-----------

   regs.x.ax=0x4F03;
   regs.h.ah=0x4F;
   regs.h.al=3;
   __dpmi_int(0x10, &regs);
   if (regs.h.al!=0x4F)
     setError(noSupport); //command not supported
   if (regs.h.ah!=0)
     setError(failed);         //command failed
   if (error()!=none)
     return -1;
   _mode=regs.x.bx;

------------------------------

	Please help!

Gili

- Raw text -