From:	krugman AT nospam DOT demon DOT co DOT uk (Kevin)
Newsgroups:	comp.os.msdos.djgpp
Subject:	Re: LCD Programming
Date:	Sat, 20 Mar 1999 00:02:40 GMT
Message-ID:	<36f3e369.12599809@158.152.254.68>
References:	<36F2BB66 DOT E23B851B AT numerica DOT it>
NNTP-Posting-Host:	reality-bytes.demon.co.uk
X-NNTP-Posting-Host:	reality-bytes.demon.co.uk:212.228.30.60
X-Trace:	news.demon.co.uk 921888139 nnrp-04:20975 NO-IDENT reality-bytes.demon.co.uk:212.228.30.60
X-Complaints-To:	abuse AT demon DOT net
X-Newsreader:	Forte Agent 1.5/32.451
MIME-Version:	1.0
Lines:	32
To:	djgpp AT delorie DOT com
DJ-Gateway:	from newsgroup comp.os.msdos.djgpp
Reply-To:	djgpp AT delorie DOT com

Hi

Guess what I was doing this very day at work, 
I was writing a program that used the parallel port to 
drive a display assembly consisting of 3 * 6 digit 7 segment 
LCDs and driven by four Hitachi HD44100 chips. the interface on these
chips is alledgedly the same as the HD66100 chips, but the 66100's are
80 registers instead of the 40 in the 44100's

I've used the paralel port for a few other thigs and its realy easy,
It's a good idea to get a separate plug in ISA card with a LPT port on
it, cos then you're less likely to damage your mother board if
something goes disastrousley wrong.

Once I had sorted out which segment was wired to which shift
register(they were all done seemingly at random, and this took half a
day to figure). It was realy easy. If you like, I'll post the code and
the LPT connections I used, but I'm not back at work till Monday, and
I don't have the code here at home.


Kevin.

If you wish to Email or ICQ me, use

kevin AT reality-bytes DOT demon DOT co DOT uk

or 

25646989

Can you tell what it is yet?

- Raw text -