Mail Archives: djgpp/1998/06/03/09:01:51
"Gil-Dong HOng" <santuary DOT master AT mailcity DOT com> wrote:
> this is my first try with djgpp, and then first time i tried to compile an
> example c file "hello.c" with a command "gcc hello.c -o hello.exe" under
> win95-osr2 us version with dos box, it did nothing but blinking a cursor. i
> waited about 5minutes; however it did nothing...i tried to run gcc under
> pure ms-dos mode by shutting down the system to restart on ms-dos mode....it
> showed some funny thing saying page fault error(i am not sure what was the
> message exactly) with lots of hex values....it seems to me that gcc doesn't
> like my cyrix cpu(6x86 pr200+) which is known for some incompatiblities with
> intel counter part......
I don't know if Robert still using the same machine, but he had a 6x86 PR166+
to develope RHIDE (and perhaps to port gcc 2.8.0/1). I still using a 5x86 120
to develope, so I think Cyrix processors works OK with djgpp.
SET
------------------------------------ 0 --------------------------------
Visit my home page: http://set-soft.home.ml.org/
or
http://www.geocities.com/SiliconValley/Vista/6552/
Salvador Eduardo Tropea (SET). (Electronics Engineer)
Alternative e-mail: set-soft AT usa DOT net set AT computer DOT org
ICQ: 2951574
Address: Curapaligue 2124, Caseros, 3 de Febrero
Buenos Aires, (1678), ARGENTINA
TE: +(541) 759 0013
- Raw text -