Mail Archives: djgpp/1994/01/28/15:38:56
>Is it possible to measure time to better than, say, 1/10000 sec ?
>Does one have to turn off the 18.2 Hz interrupts from the machine
>to do so?
>How?
>
>Thanks in advance
> Thomas Sams.
You can read the timer register directly. The following code should work
assuming that the timer hasn't been reprogrammed to interrupt at more than
18.2 Hz. The timer runs at 1193180 Hz (65536 times faster than the 18.2
Hz timer tick). If you have problems with this code, let me know and I will
try to fix it.
------------------------------------------------------------
/* short timer16() -- return 16-bit timer value */
/* timer resolution is 0.8381 microseconds (1193180 Hz clock) */
/* rolls over 18.2 times per second */
.align 2
.globl _timer16
_timer16:
cli
movb $0xc2,%al # read back cmd (status+count)
outb %al,$0x43
.byte 0xeb,0 # jmp delay
inb $0x40,%al # get status (msb=out pin)
movb %al,%cl
.byte 0xeb,0 # jmp delay
inb $0x40,%al # get LSB
movb %al,%ah
.byte 0xeb,0 # jmp delay
inb $0x40,%al # get MSB
sti
xchgb %ah,%al
orw %ax,%ax
jz _timer16 # zero is problematic
shlb $1,%cl # carry=out status
rcrw $1,%ax
negw %ax
ret
/* unsigned int timer32() -- return 32-bit timer value */
/* returns a timer with 0.8381 microsecond resolution that rolls over
about once an hour */
.align 2
.globl _timer32
_timer32:
call __go32_conventional_mem_selector
movw %ax,%gs
xorl %eax,%eax
movl %gs:0x046c,%edx # read timer tick count in dos memory
call _timer16
cmpl %gs:0x046c,%edx # has timer advanced?
je Ldone4
testb $0x80,%ah # if msbit==0 inc %edx
jnz Ldone4
incl %edx
Ldone4:
shll $16,%edx
orl %edx,%eax
ret
------------------------------------------------------------
--
----------------------------------------------------------------------
: Christopher : Huntington Beach California, USA :
: Christensen : email: cnc AT netcom DOT com :
----------------------------------------------------------------------
- Raw text -