delorie.com/archives/browse.cgi   search  
Mail Archives: cygwin-developers/2000/01/07/18:11:46

Mailing-List: contact cygwin-developers-help AT sourceware DOT cygnus DOT com; run by ezmlm
List-Subscribe: <mailto:cygwin-developers-subscribe AT sourceware DOT cygnus DOT com>
List-Archive: <http://sourceware.cygnus.com/ml/cygwin-developers/>
List-Post: <mailto:cygwin-developers AT sourceware DOT cygnus DOT com>
List-Help: <mailto:cygwin-developers-help AT sourceware DOT cygnus DOT com>, <http://sourceware.cygnus.com/ml/#faqs>
Sender: cygwin-developers-owner AT sourceware DOT cygnus DOT com
Delivered-To: mailing list cygwin-developers AT sourceware DOT cygnus DOT com
X-Authentication-Warning: hp2.xraylith.wisc.edu: khan owned process doing -bs
Date: Fri, 7 Jan 2000 17:14:26 -0600 (CST)
From: Mumit Khan <khan AT NanoTech DOT Wisc DOT EDU>
To: cygwin-developers AT sourceware DOT cygnus DOT com
Subject: patch for config changes [Re: use of __builtin_memset]
In-Reply-To: <20000107151545.B2705@cygnus.com>
Message-ID: <Pine.HPP.3.96.1000107171351.5812B-100000@hp2.xraylith.wisc.edu>
MIME-Version: 1.0

Here's a first try to start using config.h instead of passing everything
from the command line. I just saw a note about the winsup reorg, so this
is probably already useless to try and apply. However, I would like some
input on how folks feel about this change. I've deleted the change to
configure, but you can simply run autoconf for that.

If you change acconfig.h to add new macros, make sure you regenerate
config.h.in:
  
  $ autoheader

I didn't automate this via Makefile to avoid adding another "stamp" file
(see autoconf manual for more info).

Bootstrap tested, but do please watch out for bugs ...

2000-01-07  Mumit Khan  <khan AT xraylith DOT wisc DOT edu>

	* acconfig.h: New file.
	* configure.in Add check for memset builtin.
	(AC_CONFIG_HEADER): Use.
	(STRACE_HHMMSS): Define instead of substituting.
	(_MT_SAFE): Likewise.
	(_CYG_THREAD_FAILSAFE): Likewise.
	(DEBUGGING): Likewise.
	(MT_SAFE): Substitute as a yes/no variable.
	* Makefile.in: Remove DEBUGGING, STRACE_HHMMSS, and THREAD_FAILSAFE
	variables and add DEFS. Update usage of MT_SAFE to reflect yes/no
	values. Add config.h to winsup.h dependency.
	(CFLAGS_CONFIG): Update.
	(INCLUDES): Prepend `-I.'.
	* utils/Makefile.in (INCLUDES): Likewise.
	* winsup.h: Conditionally include config.h.
	* thread.cc: Likewise.
	* config.h.in: Generate new file.
	* configure: Regenerate.

Index: acconfig.h
===================================================================
RCS file: acconfig.h
diff -N acconfig.h
--- /dev/null	Tue May  5 15:32:27 1998
+++ acconfig.h	Fri Jan  7 16:04:13 2000
@@ -0,0 +1,15 @@
+/* Define if DEBUGGING support is requested.  */
+#undef DEBUGGING
+
+/* Define if building "extra" thread-safe Cygwin DLL.  */
+#undef _CYG_THREAD_FAILSAFE
+
+/* Define if GCC supports builtin memset.  */
+#undef HAVE_BUILTIN_MEMSET
+
+/* Define if building thread-safe Cygwin DLL.  */
+#undef _MT_SAFE
+
+/* Define if strace log output has date/time stamp.  */
+#undef STRACE_HHMMSS
+
Index: configure.in
===================================================================
RCS file: /homes/khan/src/CVSROOT/cygwin-dev/winsup/configure.in,v
retrieving revision 1.1.1.1
diff -u -3 -p -r1.1.1.1 configure.in
--- configure.in	2000/01/07 21:18:31	1.1.1.1
+++ configure.in	2000/01/07 23:05:41
@@ -11,6 +11,7 @@ dnl Process this file with autoconf to p
 
 AC_PREREQ(2.12)dnl
 AC_INIT(init.cc)
+AC_CONFIG_HEADER(config.h)
 
 AC_PROG_INSTALL
 
@@ -76,44 +77,88 @@ AC_ALLOCA
 AC_CONFIG_SUBDIRS(regexp mingw utils doc)		
 AC_PROG_MAKE_SET
 
+dnl check whether gcc supports __builtin_memset.
+# Test for builtin mem* functions.
+AC_LANG_SAVE
+AC_LANG_CPLUSPLUS
+AC_TRY_COMPILE([
+#include <string.h>
+void foo(char *s, int c, size_t n) 
+{ 
+  __builtin_memset(s, c, n); 
+}
+], [ ],
+use_builtin_memset=yes, use_builtin_memset=no)
+if test $use_builtin_memset = "yes"; then
+  AC_DEFINE(HAVE_BUILTIN_MEMSET)
+fi
+AC_LANG_RESTORE
+
 AC_ARG_ENABLE(strace-hhmmss,
 [ --enable-strace-hhmmss		strace log output has date/time stamp],
 [case "${enableval}" in
-yes)	STRACE_HHMMSS='-DSTRACE_HHMMSS' ;;
-no)	STRACE_HHMMSS= ;;
-*) 	AC_MSG_ERROR(bad value ${enableval} given for enable-strace-hhmmss option) ;;
+yes)	
+  AC_DEFINE(STRACE_HHMMSS) 
+  ;;
+no)	
+  ;;
+*) 	
+  AC_MSG_ERROR(bad value ${enableval} given for enable-strace-hhmmss option) 
+  ;;
 esac
-AC_SUBST(STRACE_HHMMSS)
 ])
 
-AC_SUBST(PTH_ALLOW)
-MT_SAFE='-D_MT_SAFE=1'	PTH_ALLOW=
+dnl set default mt safeness and then process the options.
+mt_safe_val=1
+MT_SAFE=yes
+PTH_ALLOW=''
+
 AC_ARG_ENABLE(threadsafe,
 [ --enable-threadsafe=[runtime]	Build a cygwin DLL which is thread safe],
 [case "${enableval}" in
-yes)	 MT_SAFE='-D_MT_SAFE=1'	PTH_ALLOW=	;;
-runtime) MT_SAFE='-D_MT_SAFE=2' PTH_ALLOW=	;;
-no)	 MT_SAFE= PTH_ALLOW=';'			;;
+yes)	 
+  dnl default.
+  ;;
+runtime) 
+  mt_safe_val=2
+  MT_SAFE=yes
+  ;;
+no)	 
+  mt_safe_val=0
+  MT_SAFE=no
+  PTH_ALLOW=';'
+  ;;
 esac
-AC_SUBST(MT_SAFE)
 ])
 
 AC_ARG_ENABLE(extra-threadsafe-checking,
 [ --enable-extra-threadsafe-checking	Build a cygwin DLL which is thread safe with extra consistency checking],
 [case "${enableval}" in
-yes)	 : ${MT_SAFE='-D_MT_SAFE=1'}; THREAD_FAILSAFE=-D_CYG_THREAD_FAILSAFE	;;
-no)	 MT_SAFE=		;;
+yes)	 
+  mt_safe_val=1
+  MT_SAFE=yes
+  AC_DEFINE(_CYG_THREAD_FAILSAFE)
+  ;;
+no)	 
+  dnl Don't do anything here to avoid overriding --enable-threadsafe.
+  ;;
 esac
-AC_SUBST(THREAD_FAILSAFE)
 ])
 
+if test "$MT_SAFE" = "yes"; then
+  AC_DEFINE_UNQUOTED(_MT_SAFE,$mt_safe_val)
+fi
+
+dnl Makefile uses MT_SAFE, so we subst as well as defining it.
+AC_SUBST(MT_SAFE)
+AC_SUBST(PTH_ALLOW)
+
 AC_ARG_ENABLE(debugging,
 [ --enable-debugging		Build a cygwin DLL which has more consistency checking for debugging],
 [case "${enableval}" in
-yes)	 DEBUGGING='-DDEBUGGING' ;;
-no)	 DEBUGGING= ;;
+yes)	 AC_DEFINE(DEBUGGING) ;;
+no)	 ;;
 esac
-AC_SUBST(DEBUGGING)
 ])
 
 
@@ -181,3 +226,4 @@ AC_SUBST(DEF_DLL_ENTRY)
 AC_SUBST(ALLOCA)
 AC_SUBST(CONFIG_DIR)
 AC_OUTPUT(Makefile cygwin.def:cygwin.din)
+
Index: Makefile.in
===================================================================
RCS file: /homes/khan/src/CVSROOT/cygwin-dev/winsup/Makefile.in,v
retrieving revision 1.1.1.1
diff -u -3 -p -r1.1.1.1 Makefile.in
--- Makefile.in	2000/01/07 21:18:31	1.1.1.1
+++ Makefile.in	2000/01/07 22:55:55
@@ -43,10 +43,8 @@ INSTALL_PROGRAM:=@INSTALL_PROGRAM@
 #
 # --enable options from configure
 #
-DEBUGGING:=@DEBUGGING@
-MT_SAFE:=@MT_SAFE@
-STRACE_HHMMSS:=@STRACE_HHMMSS@
-THREAD_FAILSAFE:=@THREAD_FAILSAFE@
+MT_SAFE = @MT_SAFE@
+DEFS = @DEFS@
 
 CC:=@CC@
 # FIXME: Which is it, CC or CC_FOR_TARGET?
@@ -54,8 +52,7 @@ CC_FOR_TARGET:=$(CC)
 CFLAGS:=@CFLAGS@
 CXXFLAGS:=@CXXFLAGS@
 CFLAGS_COMMON:=-Wall -Wwrite-strings # -finline-functions
-CFLAGS_CONFIG:=$(DEBUGGING) $(STRACE_HHMMSS) \
-		$(MT_SAFE) $(THREAD_FAILSAFE)
+CFLAGS_CONFIG:=$(DEFS) 
 MALLOC_DEBUG:=#-DMALLOC_DEBUG -I/gotham/src/comp-tools/winsup/dlmalloc
 MALLOC_OBJ:=#/gotham/src/comp-tools/winsup/dlmalloc/malloc.o
 
@@ -65,7 +62,9 @@ else
     updir:=$(srcdir)/..
 endif
 
-INCLUDES:=-I$(srcdir)/include -I$(srcdir) -I$(updir)/newlib/libc/sys/cygwin -I$(updir)/newlib/libc/include -I$(srcdir)/config/@CONFIG_DIR@ -nostdinc++
+INCLUDES:=-I. -I$(srcdir)/include -I$(srcdir) \
+  -I$(updir)/newlib/libc/sys/cygwin -I$(updir)/newlib/libc/include \
+  -I$(srcdir)/config/@CONFIG_DIR@ -nostdinc++
 
 ALL_CFLAGS:=$(MALLOC_DEBUG) $(CFLAGS) $(CFLAGS_COMMON) $(CFLAGS_CONFIG) $(INCLUDES)
 ALL_CXXFLAGS:=$(MALLOC_DEBUG) $(CXXFLAGS) $(CFLAGS_COMMON) $(CFLAGS_CONFIG) $(INCLUDES)
@@ -97,7 +96,7 @@ RUNTEST = `if [ -f $${srcdir}/../dejagnu
 RUNTESTFLAGS =
 
 DEP:=mkdep
-ifdef MT_SAFE
+ifeq ($(strip $(MT_SAFE)),yes)
 MT_SAFE_HEADERS:=thread.h
 MT_SAFE_OBJECTS:=pthread.o thread.o
 endif
@@ -483,6 +482,7 @@ WINSUP_H:=winsup.h fhandler.h path.h sha
 	  sigproc.h include/cygwin/version.h \
 	  $(MT_SAFE_HEADERS)
 
+winsup.h: config.h
 assert.o: $(WINSUP_H)
 dcrt0.o: $(WINSUP_H) include/exceptions.h include/glob.h dll_init.h autoload.h
 debug.o: $(WINSUP_H) debug.h sync.h
@@ -554,3 +554,4 @@ uname.o: $(WINSUP_H)
 wait.o: $(WINSUP_H)
 window.o: $(WINSUP_H)
 thread.o: $(WINSUP_H)
+
Index: winsup.h
===================================================================
RCS file: /homes/khan/src/CVSROOT/cygwin-dev/winsup/winsup.h,v
retrieving revision 1.1.1.1
diff -u -3 -p -r1.1.1.1 winsup.h
--- winsup.h	2000/01/07 21:18:31	1.1.1.1
+++ winsup.h	2000/01/07 22:00:30
@@ -8,6 +8,10 @@ This software is a copyrighted work lice
 Cygwin license.  Please consult the file "CYGWIN_LICENSE" for
 details. */
 
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
 #define __INSIDE_CYGWIN__
 
 #define alloca(x) __builtin_alloca (x)
@@ -15,7 +19,9 @@ details. */
 #define strcpy __builtin_strcpy
 #define memcpy __builtin_memcpy
 #define memcmp __builtin_memcmp
-#define memset __builtin_memset
+#ifdef HAVE_BUILTIN_MEMSET
+# define memset __builtin_memset
+#endif
 
 #include <sys/types.h>
 #include <sys/strace.h>
Index: thread.cc
===================================================================
RCS file: /homes/khan/src/CVSROOT/cygwin-dev/winsup/thread.cc,v
retrieving revision 1.1.1.1
diff -u -3 -p -r1.1.1.1 thread.cc
--- thread.cc	2000/01/07 21:18:31	1.1.1.1
+++ thread.cc	2000/01/07 22:22:34
@@ -10,6 +10,10 @@ This software is a copyrighted work lice
 Cygwin license.  Please consult the file "CYGWIN_LICENSE" for
 details. */
 
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
 #ifdef _MT_SAFE
 #include <errno.h>
 #include "winsup.h"
Index: config.h.in
===================================================================
RCS file: config.h.in
diff -N config.h.in
--- /dev/null	Tue May  5 15:32:27 1998
+++ config.h.in	Fri Jan  7 16:04:16 2000
@@ -0,0 +1,38 @@
+/* config.h.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define if using alloca.c.  */
+#undef C_ALLOCA
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+#undef CRAY_STACKSEG_END
+
+/* Define if you have alloca, as a function or macro.  */
+#undef HAVE_ALLOCA
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
+#undef HAVE_ALLOCA_H
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+ STACK_DIRECTION > 0 => grows toward higher addresses
+ STACK_DIRECTION < 0 => grows toward lower addresses
+ STACK_DIRECTION = 0 => direction of growth unknown
+ */
+#undef STACK_DIRECTION
+
+/* Define if DEBUGGING support is requested.  */
+#undef DEBUGGING
+
+/* Define if building "extra" thread-safe Cygwin DLL.  */
+#undef _CYG_THREAD_FAILSAFE
+
+/* Define if GCC supports builtin memset.  */
+#undef HAVE_BUILTIN_MEMSET
+
+/* Define if building thread-safe Cygwin DLL.  */
+#undef _MT_SAFE
+
+/* Define if strace log output has date/time stamp.  */
+#undef STRACE_HHMMSS
Index: utils/Makefile.in
===================================================================
RCS file: /homes/khan/src/CVSROOT/cygwin-dev/winsup/utils/Makefile.in,v
retrieving revision 1.1.1.1
diff -u -3 -p -r1.1.1.1 Makefile.in
--- Makefile.in	2000/01/07 21:18:31	1.1.1.1
+++ Makefile.in	2000/01/07 22:27:40
@@ -32,7 +32,7 @@ CXXFLAGS = @CXXFLAGS@
 
 MINGW_INCLUDES = -I$(srcdir)/../mingw/include -I$(srcdir)/../include
 
-INCLUDES = -I$(srcdir)/.. -I$(srcdir)/../include \
+INCLUDES = -I.. -I$(srcdir)/.. -I$(srcdir)/../include \
 	   -I$(srcdir)/../../newlib/libc/sys/cygwin \
 	   -I$(srcdir)/../../newlib/libc/include
 
@@ -91,3 +91,4 @@ Makefile: Makefile.in $(srcdir)/configur
 
 config.status: configure
 	$(SHELL) config.status --recheck
+

- Raw text -


  webmaster     delorie software   privacy  
  Copyright © 2019   by DJ Delorie     Updated Jul 2019