Mail Archives: cygwin/2006/01/05/20:55:42
Let me say again, THANKS for helping!
Well, the screen has stayed frozen for some 10 minutes. Some observations:
1. Killing the rsync process (CTRL-C) on [LOCAL/Linux] does not kill
the process on [REMOTE/Windows]. I have to kill the process manually on
[REMOTE].
2. The process seems to stop at one or two of the same files each time:
run1 : hung at file A bytes transferred: 2,392,064
run2 : hung at file B bytes transferred: 2,408,448
run3 : hung at file B bytes transferred: 2,408,448
run4 : hung back at file A bytes transferred: 2,408,448
run5 : hung at file A bytes transferred: 2,408,448
Deleted all previously-transferred files and then:
run6 : hung at file A bytes transferred: 2,359,296
run7 : hung at file A bytes transferred: 2,359,296
run8 : hung at file A bytes transferred: 2,359,296
Deleted all previously-transferred files and then:
run9 : hung at file A bytes transferred: 2,359,296
Deleted all previously-transferred files and then:
run10: hung at file A bytes transferred: 2,359,296
Notice that some of these have interesting differences: 2,359,296 -
2,392,064=32,768=2^15
2,408,448 - 2,392,064 = 16,384 = 2^14. Files A and B are each small
files as are files adjacent to them.
3. To answer your earlier question, I installed cygwin and added the
rsync and openssh which were part of the distribution but were not
installed by default. I did not compile my own.
Brett Serkez wrote:
>Ken,
>
>The rsync protocol actually does check-suming of blocks to efficiently
>detect and transfer files. While it may look like it is hung, it may
>actually be just transfering check sums on each file. When I perform
>long transfers it looks hung from time to time, but my use of the extra
>v switches helped me better understand the protocol.
>
>When it stops at a different directory and file, is it always
>further along?
>
>It may well be hung, but be sure. Interesting that it works the other
>way without having to build a custom rsync. I've found this behavior
>consistent, but then again, I always install Cygwin with the same set of
>packages. Do you do a full install of Cygwin? I usually perform a
>default install and just add vi, tcsh, openssh and rsync.
>
>Brett
>
>On Thu, 05 Jan 2006 19:37:22 -0500, "Ken Senior"
><seniork AT gmail DOT com> said:
>
>
>>Thanks Brett for the quick reply. The multiple -v is a handy thing to
>>remember.
>>
>>In fact this is not my problem though. It looks like the listing of
>>files just hangs midstream. Some local directories are created and
>>sometimes a few files make it too, but it just hangs. For example:
>>
>> . . .
>> recv_generator(MATLAB/wavelab/Papers/SpinCycle/cspinfo03.m,8425)
>> recv_generator(MATLAB/wavelab/Papers/SpinCycle/cspinfo04.m,8425)
>> recv_generator(MATLAB/wavelab/Papers/SpinCycle/cspinfo05.m,8425)
>>
>>None of these files were actually transferred and there are plenty
>>more of these similarly-named files well beyond cspinfo05.m, leaving
>>me no additional info. Moreover, there are no special characters or
>>spaces in these files to suggest a problem in the file or directory
>>name. Also, each launch seems to stop at a different directory and
>>file. Bizarre. I don't know how to use strace or I'd try that. -K
>>
>>
>>Brett Serkez wrote:
>>
>>
>>
>>>Ken,
>>>
>>>I run rsync both Windows and Linux to Linux, Linux always being the
>>>'server'. In my case I found the hang to be up front, before secure
>>>shell even attempted to access the network and also in my case
>>>changing from a local socket to a local pipe resolved the issue:
>>>
>>>http://cygwin.com/ml/cygwin/2005-12/msg01096.html
>>>
>>>Have you tried adding more v switches to your command line, like:
>>>
>>>rsync -avvz user@[REMOTE/Windows]:/path/to/stuff/ dest/on/local/
>>>rsync -avvvz user@[REMOTE/Windows]:/path/to/stuff/ dest/on/local/
>>>rsync -avvvvvz user@[REMOTE/Windows]:/path/to/stuff/ dest/on/local/
>>>
>>>Each time you a a v switch, it increases the debug output, I think up
>>>to 4 or 5. This would help to narrow the issue as you'll see how far
>>>your getting in the protocol which might help narrow the problem.
>>>
>>>Is it at all possible to go the other way? I know if you are
>>>willing to build your own rsync with the socketpair() called
>>>disabled it will work.
>>>
>>>Brett
>>>
>>>
>>>
>>>On Thu, 05 Jan 2006 18:46:04 -0500, "Ken Senior"
>>><seniork AT gmail DOT com> said:
>>>
>>>
>>>
>>>
>>>>Hi.
>>>>
>>>>I posted the message listed below to the rsync list, but one of the
>>>>readers there suggested I post it here indicating that there's a
>>>>known/common problem in cygwin of data loss in local pipes (whatever
>>>>that means I am not sure). I find my rsync command hanging, whether
>>>>or not I run it over SSH, that is with our without the --rsh='ssh -l
>>>>username'. I searched and read the archived mail on the cygwin list
>>>>archives and though there are six pages of "rsync hanging" issues, I
>>>>didn't find much help. Unfortunately, the logs are saying nothing
>>>>and I couldn't get the strace business to work---no doubt because
>>>>I've never used it. Can anyone here suggest anything? -Thanks
>>>>
>>>>
>>>>
>>>>----
>>>>
>>>>I just installed the latest version of cygwin (1.5.18-1) from
>>>>www.cygwin.com on my Windows XP machine. I have had a lot of
>>>>success with rsync between Linux boxes but after many months of
>>>>mixed results I have had much less than perfect luck with rsync from
>>>>a Linux box [LOCAL] to a windows box [REMOTE]---that is, constant
>>>>hanging.
>>>>
>>>>I have tried to follow the rsync FAQ on using strace to figure out
>>>>why things are hanging, but I'm not understanding what gets launched
>>>>where and in what order. I created the rsync-debug script (below)
>>>>as suggested, but it's unclear how to use it. Would you guys mind
>>>>giving a step-by-step on how to get this strace info?
>>>>
>>>>For example, let's say on [LOCAL/Linux] I want to issue the command:
>>>>
>>>>rsync -avz user@[REMOTE/Windows]:/path/to/stuff/ dest/on/local/
>>>>
>>>>Do I first launch the rsync-debug on [REMOTE/Windows]? Do I modify
>>>>the above command in order to get things rolling?
>>>>
>>>>Cheers and thanks in advance.
>>>>
>>>>-Ken
>>>>
>>>>----
>>>>
>>>>rsync-debug script:
>>>>
>>>>ulimit -c unlimited strace -f rsync --daemon --no-detach 2>/tmp/rsync-
>>>>$$.out
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>--
>>>>Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
>>>>Problem reports: http://cygwin.com/problems.html
>>>>Documentation: http://cygwin.com/docs.html FAQ:
>>>>http://cygwin.com/faq/
>>>>
>>>>
>>>>
>>>>
>>>>
>>>----------------------------------------------------------------
>>>Brett C. Serkez, Techie
>>>
>>>
>>>
>>>
>>>
>>>
>----------------------------------------------------------------
>Brett C. Serkez, Techie
>
>
>
>
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
- Raw text -