Mail Archives: cygwin/2004/03/20/15:46:05
Okay, I don't recall seeing the output of "cygcheck -svr" attached to any
of your messages, as requested in <http://cygwin.com/problems.html>.
Please *attach* the output rather than including it inline. You should be
able to run cygcheck from a CMD prompt.
Did you try a clean install by moving your Cygwin root directory out of
the way? Whether or not you're able to do this, and what exact errors you
get when doing this, might prove instructive... FWIW, unless you have
non-standard mounts, you should be able to recover the original (albeit
non-working) installation by moving the old root directory back to
c:\cygwin... But first things first -- we need to see the output of
"cygcheck -svr".
BTW, does running "c:\cygwin\bin\bash --norc" also result in no prompt?
If not, does that bash work normally (note that you'll need to explicitly
prepend "/bin:/usr/bin:/usr/X11R6/bin" to your PATH before you'll be able
to run any commands)?
Igor
On Sat, 20 Mar 2004, Christopher M. Balz wrote:
> The hang itself is indeed a soft hang. I can click out of it using the
> 'Cancel' button, and then at least sometimes, 'setup' will tell me that
> installation is complete. Somewhere in these last clicks is where my
> entire machine was taken down during two of my earlier attempts today.
>
> cd c:\cygwin\bin
> .\bash.exe --login -i
>
> yields nothing, as before -- meaning that a blinking prompt is shown on
> the line after the last command, and that's all.
>
> - CB
>
> Igor Pechtchanski wrote:
>
> >On Sat, 20 Mar 2004, Christopher M. Balz wrote:
> >
> >>Answering Igor's questions . . .
> >>
> >>'setup' hangs when it dies. The window its in closes without any
> >>problem, though.
> >
> >So it doesn't really crash anything? And this doesn't sound like a hard
> >hang, either -- at least the events are processed normally...
> >
> >>Running 'cygwin.bat' from the command line yields nothing.
> >
> >I.e., just shows another prompt right away, or runs but doesn't show the
> >prompt? How about if you run
> >
> >cd c:\cygwin\bin
> >.\bash.exe --login -i
> >
> >?
> >
> >>Below is the content of my setup.log.full file:
> >>
> >>setup.log.full [irrelevant parts snipped]:
> >>2004/03/20 10:11:01 Starting cygwin install, version 2.416
> >>[X-startup-scripts] action=1.0.4-1 trust=curr installed=1.0.3-1 src?=no
> >> categories=All, XFree86
> >>[xterm] action=185-2 trust=curr installed=185-1 src?=no
> >> categories=All, XFree86
> >>2004/03/20 10:11:17 Installing file://C:\Program Files\cygwin/http%3a%2f%2fmirrors.sunsite.dk%2fcygwin/release/XFree86/X-startup-scripts/X-startup-scripts-1.0.4-1.tar.bz2
> >>2004/03/20 10:11:18 Installing file://C:\Program Files\cygwin/http%3a%2f%2fmirrors.sunsite.dk%2fcygwin/release/XFree86/xterm/xterm-185-2.tar.bz2
> >>2004/03/20 10:11:20 running: C:\cygwin\bin\sh.exe -c /etc/postinstall/post-texmf.sh
> >>2004/03/20 11:24:36 mbox note: Installation Complete
> >>2004/03/20 11:24:37 Ending cygwin install
> >
> >Okay, so this shows that you did not reinstall either tetex-base or
> >tetex-tiny (good), and the postinstall script is still executed (bad).
> >This means that it never completed the execution, otherwise it would have
> >been renamed to "*.done". Try actually renaming it (by running
> >
> >cd c:\cygwin\etc\postinstall
> >ren post-texmf.sh post-texmf.sh.done
> >
> >from a CMD prompt). Then try re-running setup and see if it still hangs.
> >Also, try the latest setup snapshot (<http://cygwin.com/setup-snapshots/>)
> >and see if it fares better.
> >
> >It would also be interesting to try actually running the script (via
> >
> >c:\cygwin\bin\sh.exe -x /etc/postinstall/post-texmf.sh.done
> >
> >) and seeing if it hangs and what output it produces.
> >HTH,
> > Igor
> >
> >>Igor Pechtchanski wrote:
> >>
> >>>On Sat, 20 Mar 2004, Christopher M. Balz wrote:
> >>>
> >>>>On Win2K SP 4 up-to-date, I install most packages (including X and tex)
> >>>>and 'setup' hangs with the folllowing message:
> >>>>
> >>>> Running . . .
> >>>>
> >>>> No package
> >>>>
> >>>> /etc/postinstall/post-texmf.sh
> >>>>
> >>>>The progress bar is almost finished at this point (above).
> >>>>
> >>>>The install has broken my Cygwin shell completely. It pops up in a
> >>>>window and closes fine but shows no text.
> >>>>
> >>>Have you seen <http://cygwin.com/ml/cygwin/2004-03/msg00931.html> (my
> >>>previous reply)? If you run "cygwin.bat" from a CMD shell, do you get any
> >>>messages?
> >>>
> >>>>The first two times 'setup' hung, it crashed my machine.
> >>>
> >>>"Crashed" as in BSOD? What is the exact error (you may need to enable
> >>>BSODs for this or look in the Windows Event log).
> >>>
> >>>>I did try moving 'post-textmf.sh' to 'post-textmf.sh.done' but no luck.
> >>> ^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^
> >>>This should be 'post-texmf.sh' and 'post-texmf.sh.done'... But that file
> >>>will be recreated every time you reinstall tetex-base or tetex-tiny.
> >>>
> >>>>Thank you in advance!
> >>>> - CB
> >>>
> >>>Is there any post-texmf.sh output in /var/log/setup.log.full?
> >>> Igor
--
http://cs.nyu.edu/~pechtcha/
|\ _,,,---,,_ pechtcha AT cs DOT nyu DOT edu
ZZZzz /,`.-'`' -. ;-;;,_ igor AT watson DOT ibm DOT com
|,4- ) )-,_. ,\ ( `'-' Igor Pechtchanski, Ph.D.
'---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow!
"I have since come to realize that being between your mentor and his route
to the bathroom is a major career booster." -- Patrick Naughton
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
- Raw text -