Mail Archives: cygwin/2003/06/15/22:23:22
------=_NextPart_000_0000_01C3338C.A50A9CC0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Hi Gerrit,
I have re-installed Cygwin because I wanted to start developing some web
apps and apache is the best choice for me. Apache isn't giving me this
error anymore:
cygrunsrv: Error starting a service: QueryServiceStatus: Win32 error 1062:
The service has not been started.
Instead it just does nothing, but I still can't connect to 127.0.0.1
I will attach the files you requested, hopefully you can see something I
don't. I also checked the error.log and it's giving me a new error, I
searched the mailing list archives but could find nothing pertaining to
this.
[Sun Jun 15 22:07:03 2003] [notice] Apache/1.3.24 (Cygwin) configured --
resuming normal operations
[Sun Jun 15 22:07:03 2003] [notice] Accept mutex: pthread (Default: pthread)
[Sun Jun 15 22:07:03 2003] [alert] Child 1448 returned a Fatal error...
Apache is exiting!
[Sun Jun 15 22:07:03 2003] [alert] (22)Invalid argument: setuid: unable to
change to uid: 65535
I am running Cygwin via:
cygrunsrv -I httpd -p /usr/sbin/httpd -d "CYGWIN httpd" -a '-k' -e
"CYGWIN=binmode ntsec"
cygrunsrv -S httpd
Thanks,
Sergio
> -----Original Message-----
> From: cygwin-owner AT cygwin DOT com [mailto:cygwin-owner AT cygwin DOT com]On Behalf
> Of Gerrit P. Haase
> Sent: Saturday, June 14, 2003 8:11 AM
> To: Sergio
> Cc: cygwin AT cygwin DOT com
> Subject: Re: Problem Running Apache through Cygwin
>
>
> Hallo Sergio,
>
> It should run.
> Can you send your httpd.conf (as attachment), please?
> And your /var/log/apache/error.log & access.log too?
>
>
> Gerrit
> --
> =^..^=
>
>
> --
> Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
> Problem reports: http://cygwin.com/problems.html
> Documentation: http://cygwin.com/docs.html
> FAQ: http://cygwin.com/faq/
>
>
------=_NextPart_000_0000_01C3338C.A50A9CC0
Content-Type: application/octet-stream;
name="httpd.log"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="httpd.log"
[Sun Jun 15 21:59:20 2003] [alert] httpd: Could not determine the =
server's fully qualified domain name, using 192.168.1.100 for ServerName=0A=
------=_NextPart_000_0000_01C3338C.A50A9CC0
Content-Type: application/octet-stream;
name="error_log"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="error_log"
[Sun Jun 15 21:59:21 2003] [alert] httpd: Could not determine the =
server's fully qualified domain name, using 192.168.1.100 for ServerName=0A=
[Sun Jun 15 21:59:22 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 21:59:22 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 21:59:23 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 21:59:23 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 21:59:23 2003] [notice] Apache/1.3.24 (Cygwin) configured -- =
resuming normal operations=0A=
[Sun Jun 15 21:59:23 2003] [notice] Accept mutex: pthread (Default: =
pthread)=0A=
[Sun Jun 15 21:59:23 2003] [alert] Child 3020 returned a Fatal error... =0A=
Apache is exiting!=0A=
[Sun Jun 15 21:59:23 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:00:56 2003] [warn] pid file /var/run/httpd.pid =
overwritten -- Unclean shutdown of previous Apache run?=0A=
[Sun Jun 15 22:00:57 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:00:57 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:00:58 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:00:58 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:00:59 2003] [notice] Apache/1.3.24 (Cygwin) configured -- =
resuming normal operations=0A=
[Sun Jun 15 22:00:59 2003] [notice] Accept mutex: pthread (Default: =
pthread)=0A=
[Sun Jun 15 22:00:59 2003] [alert] Child 2468 returned a Fatal error... =0A=
Apache is exiting!=0A=
[Sun Jun 15 22:00:59 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:01:25 2003] [error] (13)Permission denied: could not open =
transfer log file /var/log/apache/access_log.=0A=
[Sun Jun 15 22:02:47 2003] [warn] pid file /var/run/httpd.pid =
overwritten -- Unclean shutdown of previous Apache run?=0A=
[Sun Jun 15 22:02:48 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:02:48 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:02:48 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:02:49 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:02:49 2003] [notice] Apache/1.3.24 (Cygwin) configured -- =
resuming normal operations=0A=
[Sun Jun 15 22:02:49 2003] [notice] Accept mutex: pthread (Default: =
pthread)=0A=
[Sun Jun 15 22:02:49 2003] [alert] Child 3672 returned a Fatal error... =0A=
Apache is exiting!=0A=
[Sun Jun 15 22:02:49 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:07:01 2003] [warn] pid file /var/run/httpd.pid =
overwritten -- Unclean shutdown of previous Apache run?=0A=
[Sun Jun 15 22:07:02 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:07:02 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:07:03 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:07:03 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
[Sun Jun 15 22:07:03 2003] [notice] Apache/1.3.24 (Cygwin) configured -- =
resuming normal operations=0A=
[Sun Jun 15 22:07:03 2003] [notice] Accept mutex: pthread (Default: =
pthread)=0A=
[Sun Jun 15 22:07:03 2003] [alert] Child 1448 returned a Fatal error... =0A=
Apache is exiting!=0A=
[Sun Jun 15 22:07:03 2003] [alert] (22)Invalid argument: setuid: unable =
to change to uid: 65535=0A=
------=_NextPart_000_0000_01C3338C.A50A9CC0
Content-Type: application/octet-stream;
name="httpd.conf"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="httpd.conf"
##=0A=
## httpd.conf -- Apache HTTP server configuration file=0A=
##=0A=
=0A=
#=0A=
# Based upon the NCSA server configuration files originally by Rob =
McCool.=0A=
#=0A=
# This is the main Apache server configuration file. It contains the=0A=
# configuration directives that give the server its instructions.=0A=
# See <URL:http://www.apache.org/docs/> for detailed information about=0A=
# the directives.=0A=
#=0A=
# Do NOT simply read the instructions in here without understanding=0A=
# what they do. They're here only as hints or reminders. If you are =
unsure=0A=
# consult the online docs. You have been warned. =0A=
#=0A=
# After this file is processed, the server will look for and process=0A=
# /usr/conf/srm.conf and then /usr/conf/access.conf=0A=
# unless you have overridden these with ResourceConfig and/or=0A=
# AccessConfig directives here.=0A=
#=0A=
# The configuration directives are grouped into three basic sections:=0A=
# 1. Directives that control the operation of the Apache server process =
as a=0A=
# whole (the 'global environment').=0A=
# 2. Directives that define the parameters of the 'main' or 'default' =
server,=0A=
# which responds to requests that aren't handled by a virtual host.=0A=
# These directives also provide default values for the settings=0A=
# of all virtual hosts.=0A=
# 3. Settings for virtual hosts, which allow Web requests to be sent to=0A=
# different IP addresses or hostnames and have them handled by the=0A=
# same Apache server process.=0A=
#=0A=
# Configuration and logfile names: If the filenames you specify for many=0A=
# of the server's control files begin with "/" (or "drive:/" for Win32), =
the=0A=
# server will use that explicit path. If the filenames do *not* begin=0A=
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"=0A=
# with ServerRoot set to "/usr/local/apache" will be interpreted by the=0A=
# server as "/usr/local/apache/logs/foo.log".=0A=
#=0A=
=0A=
### Section 1: Global Environment=0A=
#=0A=
# The directives in this section affect the overall operation of Apache,=0A=
# such as the number of concurrent requests it can handle or where it=0A=
# can find its configuration files.=0A=
#=0A=
=0A=
#=0A=
# ServerType is either inetd, or standalone. Inetd mode is only =
supported on=0A=
# Unix platforms.=0A=
#=0A=
ServerType standalone=0A=
=0A=
#=0A=
# ServerRoot: The top of the directory tree under which the server's=0A=
# configuration, error, and log files are kept.=0A=
#=0A=
# NOTE! If you intend to place this on an NFS (or otherwise network)=0A=
# mounted filesystem then please read the LockFile documentation=0A=
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);=0A=
# you will save yourself a lot of trouble.=0A=
#=0A=
ServerRoot "/usr"=0A=
=0A=
#=0A=
# The LockFile directive sets the path to the lockfile used when Apache=0A=
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or=0A=
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at=0A=
# its default value. The main reason for changing it is if the logs=0A=
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL=0A=
# DISK. The PID of the main server process is automatically appended to=0A=
# the filename. =0A=
#=0A=
#LockFile /var/run/httpd.lock=0A=
=0A=
#=0A=
# PidFile: The file in which the server should record its process=0A=
# identification number when it starts.=0A=
#=0A=
PidFile /var/run/httpd.pid=0A=
=0A=
#=0A=
# ScoreBoardFile: File used to store internal server process information.=0A=
# Not all architectures require this. But if yours does (you'll know =
because=0A=
# this file will be created when you run Apache) then you *must* ensure =
that=0A=
# no two invocations of Apache share the same scoreboard file.=0A=
#=0A=
ScoreBoardFile /var/run/httpd.scoreboard=0A=
=0A=
#=0A=
# In the standard configuration, the server will process httpd.conf =
(this =0A=
# file, specified by the -f command line option), srm.conf, and =
access.conf =0A=
# in that order. The latter two files are now distributed empty, as it =
is =0A=
# recommended that all directives be kept in a single file for =
simplicity. =0A=
# The commented-out values below are the built-in defaults. You can =
have the =0A=
# server ignore these files altogether by using "/dev/null" (for Unix) or=0A=
# "nul" (for Win32) for the arguments to the directives.=0A=
#=0A=
#ResourceConfig conf/srm.conf=0A=
#AccessConfig conf/access.conf=0A=
=0A=
#=0A=
# Timeout: The number of seconds before receives and sends time out.=0A=
#=0A=
Timeout 300=0A=
=0A=
#=0A=
# KeepAlive: Whether or not to allow persistent connections (more than=0A=
# one request per connection). Set to "Off" to deactivate.=0A=
#=0A=
KeepAlive On=0A=
=0A=
#=0A=
# MaxKeepAliveRequests: The maximum number of requests to allow=0A=
# during a persistent connection. Set to 0 to allow an unlimited amount.=0A=
# We recommend you leave this number high, for maximum performance.=0A=
#=0A=
MaxKeepAliveRequests 100=0A=
=0A=
#=0A=
# KeepAliveTimeout: Number of seconds to wait for the next request from =
the=0A=
# same client on the same connection.=0A=
#=0A=
KeepAliveTimeout 15=0A=
=0A=
#=0A=
# Server-pool size regulation. Rather than making you guess how many=0A=
# server processes you need, Apache dynamically adapts to the load it=0A=
# sees --- that is, it tries to maintain enough server processes to=0A=
# handle the current load, plus a few spare servers to handle transient=0A=
# load spikes (e.g., multiple simultaneous requests from a single=0A=
# Netscape browser).=0A=
#=0A=
# It does this by periodically checking how many servers are waiting=0A=
# for a request. If there are fewer than MinSpareServers, it creates=0A=
# a new spare. If there are more than MaxSpareServers, some of the=0A=
# spares die off. The default values are probably OK for most sites.=0A=
#=0A=
MinSpareServers 5=0A=
MaxSpareServers 10=0A=
=0A=
#=0A=
# Number of servers to start initially --- should be a reasonable =
ballpark=0A=
# figure.=0A=
#=0A=
StartServers 5=0A=
=0A=
#=0A=
# Limit on total number of servers running, i.e., limit on the number=0A=
# of clients who can simultaneously connect --- if this limit is ever=0A=
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.=0A=
# It is intended mainly as a brake to keep a runaway server from taking=0A=
# the system with it as it spirals down...=0A=
#=0A=
MaxClients 150=0A=
=0A=
#=0A=
# MaxRequestsPerChild: the number of requests each child process is=0A=
# allowed to process before the child dies. The child will exit so=0A=
# as to avoid problems after prolonged use when Apache (and maybe the=0A=
# libraries it uses) leak memory or other resources. On most systems, =
this=0A=
# isn't really needed, but a few (such as Solaris) do have notable leaks=0A=
# in the libraries. For these platforms, set to something like 10000=0A=
# or so; a setting of 0 means unlimited.=0A=
#=0A=
# NOTE: This value does not include keepalive requests after the initial=0A=
# request per connection. For example, if a child process handles=0A=
# an initial request and 10 subsequent "keptalive" requests, it=0A=
# would only count as 1 request towards this limit.=0A=
#=0A=
MaxRequestsPerChild 0=0A=
=0A=
#=0A=
# Listen: Allows you to bind Apache to specific IP addresses and/or=0A=
# ports, in addition to the default. See also the <VirtualHost>=0A=
# directive.=0A=
#=0A=
#Listen 3000=0A=
#Listen 12.34.56.78:80=0A=
=0A=
#=0A=
# BindAddress: You can support virtual hosts with this option. This =
directive=0A=
# is used to tell the server which IP address to listen to. It can either=0A=
# contain "*", an IP address, or a fully qualified Internet domain name.=0A=
# See also the <VirtualHost> and Listen directives.=0A=
#=0A=
#BindAddress *=0A=
=0A=
#=0A=
# Dynamic Shared Object (DSO) Support=0A=
#=0A=
# To be able to use the functionality of a module which was built as a =
DSO you=0A=
# have to place corresponding `LoadModule' lines at this location so the=0A=
# directives contained in it are actually available _before_ they are =
used.=0A=
# Please read the file http://httpd.apache.org/docs/dso.html for more=0A=
# details about the DSO mechanism and run `httpd -l' for the list of =
already=0A=
# built-in (statically linked and thus always available) modules in your =
httpd=0A=
# binary.=0A=
#=0A=
# Note: The order in which modules are loaded is important. Don't change=0A=
# the order below without expert advice.=0A=
#=0A=
# Example:=0A=
# LoadModule foo_module libexec/mod_foo.so=0A=
LoadModule vhost_alias_module lib/apache/mod_vhost_alias.dll=0A=
LoadModule env_module lib/apache/mod_env.dll=0A=
LoadModule config_log_module lib/apache/mod_log_config.dll=0A=
LoadModule mime_magic_module lib/apache/mod_mime_magic.dll=0A=
LoadModule mime_module lib/apache/mod_mime.dll=0A=
LoadModule negotiation_module lib/apache/mod_negotiation.dll=0A=
LoadModule status_module lib/apache/mod_status.dll=0A=
LoadModule info_module lib/apache/mod_info.dll=0A=
LoadModule includes_module lib/apache/mod_include.dll=0A=
LoadModule autoindex_module lib/apache/mod_autoindex.dll=0A=
LoadModule dir_module lib/apache/mod_dir.dll=0A=
LoadModule cgi_module lib/apache/mod_cgi.dll=0A=
LoadModule asis_module lib/apache/mod_asis.dll=0A=
LoadModule imap_module lib/apache/mod_imap.dll=0A=
LoadModule action_module lib/apache/mod_actions.dll=0A=
LoadModule speling_module lib/apache/mod_speling.dll=0A=
LoadModule userdir_module lib/apache/mod_userdir.dll=0A=
LoadModule alias_module lib/apache/mod_alias.dll=0A=
LoadModule rewrite_module lib/apache/mod_rewrite.dll=0A=
LoadModule access_module lib/apache/mod_access.dll=0A=
LoadModule auth_module lib/apache/mod_auth.dll=0A=
LoadModule anon_auth_module lib/apache/mod_auth_anon.dll=0A=
LoadModule dbm_auth_module lib/apache/mod_auth_dbm.dll=0A=
LoadModule digest_module lib/apache/mod_digest.dll=0A=
LoadModule proxy_module lib/apache/libproxy.dll=0A=
LoadModule cern_meta_module lib/apache/mod_cern_meta.dll=0A=
LoadModule expires_module lib/apache/mod_expires.dll=0A=
LoadModule headers_module lib/apache/mod_headers.dll=0A=
LoadModule usertrack_module lib/apache/mod_usertrack.dll=0A=
LoadModule unique_id_module lib/apache/mod_unique_id.dll=0A=
LoadModule setenvif_module lib/apache/mod_setenvif.dll=0A=
=0A=
# Reconstruction of the complete module list from all available modules=0A=
# (static and shared ones) to achieve correct module execution order.=0A=
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]=0A=
ClearModuleList=0A=
AddModule mod_vhost_alias.c=0A=
AddModule mod_env.c=0A=
AddModule mod_log_config.c=0A=
AddModule mod_mime_magic.c=0A=
AddModule mod_mime.c=0A=
AddModule mod_negotiation.c=0A=
AddModule mod_status.c=0A=
AddModule mod_info.c=0A=
AddModule mod_include.c=0A=
AddModule mod_autoindex.c=0A=
AddModule mod_dir.c=0A=
AddModule mod_cgi.c=0A=
AddModule mod_asis.c=0A=
AddModule mod_imap.c=0A=
AddModule mod_actions.c=0A=
AddModule mod_speling.c=0A=
AddModule mod_userdir.c=0A=
AddModule mod_alias.c=0A=
AddModule mod_rewrite.c=0A=
AddModule mod_access.c=0A=
AddModule mod_auth.c=0A=
AddModule mod_auth_anon.c=0A=
AddModule mod_auth_dbm.c=0A=
AddModule mod_digest.c=0A=
AddModule mod_proxy.c=0A=
AddModule mod_cern_meta.c=0A=
AddModule mod_expires.c=0A=
AddModule mod_headers.c=0A=
AddModule mod_usertrack.c=0A=
AddModule mod_unique_id.c=0A=
AddModule mod_so.c=0A=
AddModule mod_setenvif.c=0A=
=0A=
#=0A=
# ExtendedStatus controls whether Apache will generate "full" status=0A=
# information (ExtendedStatus On) or just basic information =
(ExtendedStatus=0A=
# Off) when the "server-status" handler is called. The default is Off.=0A=
#=0A=
#ExtendedStatus On=0A=
=0A=
### Section 2: 'Main' server configuration=0A=
#=0A=
# The directives in this section set up the values used by the 'main'=0A=
# server, which responds to any requests that aren't handled by a=0A=
# <VirtualHost> definition. These values also provide defaults for=0A=
# any <VirtualHost> containers you may define later in the file.=0A=
#=0A=
# All of these directives may appear inside <VirtualHost> containers,=0A=
# in which case these default settings will be overridden for the=0A=
# virtual host being defined.=0A=
#=0A=
=0A=
#=0A=
# If your ServerType directive (set earlier in the 'Global Environment'=0A=
# section) is set to "inetd", the next few directives don't have any=0A=
# effect since their settings are defined by the inetd configuration.=0A=
# Skip ahead to the ServerAdmin directive.=0A=
#=0A=
=0A=
#=0A=
# Port: The port to which the standalone server listens. For=0A=
# ports < 1023, you will need httpd to be run as root initially.=0A=
#=0A=
Port 80=0A=
=0A=
#=0A=
# If you wish httpd to run as a different user or group, you must run=0A=
# httpd as root initially and it will switch. =0A=
#=0A=
# User/Group: The name (or #number) of the user/group to run httpd as.=0A=
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".=0A=
# . On HPUX you may not be able to use shared memory as nobody, and the=0A=
# suggested workaround is to create a user www and use that user.=0A=
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)=0A=
# when the value of (unsigned)Group is above 60000; =0A=
# don't use Group #-1 on these systems!=0A=
#=0A=
#User nobody=0A=
#Group #-1=0A=
=0A=
#=0A=
# ServerAdmin: Your address, where problems with the server should be=0A=
# e-mailed. This address appears on some server-generated pages, such=0A=
# as error documents.=0A=
#=0A=
ServerAdmin you AT localhost DOT localdomain=0A=
=0A=
#=0A=
# ServerName allows you to set a host name which is sent back to clients =
for=0A=
# your server if it's different than the one the program would get =
(i.e., use=0A=
# "www" instead of the host's real name).=0A=
#=0A=
# Note: You cannot just invent host names and hope they work. The name =
you =0A=
# define here must be a valid DNS name for your host. If you don't =
understand=0A=
# this, ask your network administrator.=0A=
# If your host doesn't have a registered DNS name, enter its IP address =
here.=0A=
# You will have to access it by its address (e.g., http://123.45.67.89/)=0A=
# anyway, and this will make redirections work in a sensible way.=0A=
#=0A=
# 127.0.0.1 is the TCP/IP local loop-back address, often named =
localhost. Your =0A=
# machine always knows itself by this address. If you use Apache =
strictly for =0A=
# local testing and development, you may use 127.0.0.1 as the server =
name.=0A=
#=0A=
ServerName 127.0.0.1=0A=
=0A=
#=0A=
# DocumentRoot: The directory out of which you will serve your=0A=
# documents. By default, all requests are taken from this directory, but=0A=
# symbolic links and aliases may be used to point to other locations.=0A=
#=0A=
DocumentRoot "/var/www/htdocs"=0A=
=0A=
#=0A=
# Each directory to which Apache has access, can be configured with =
respect=0A=
# to which services and features are allowed and/or disabled in that=0A=
# directory (and its subdirectories). =0A=
#=0A=
# First, we configure the "default" to be a very restrictive set of =0A=
# permissions. =0A=
#=0A=
<Directory />=0A=
Options FollowSymLinks=0A=
AllowOverride None=0A=
</Directory>=0A=
=0A=
#=0A=
# Note that from this point forward you must specifically allow=0A=
# particular features to be enabled - so if something's not working as=0A=
# you might expect, make sure that you have specifically enabled it=0A=
# below.=0A=
#=0A=
=0A=
#=0A=
# This should be changed to whatever you set DocumentRoot to.=0A=
#=0A=
<Directory "/var/www/htdocs">=0A=
=0A=
#=0A=
# This may also be "None", "All", or any combination of "Indexes",=0A=
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".=0A=
#=0A=
# Note that "MultiViews" must be named *explicitly* --- "Options All"=0A=
# doesn't give it to you.=0A=
#=0A=
Options Indexes FollowSymLinks MultiViews=0A=
=0A=
#=0A=
# This controls which options the .htaccess files in directories can=0A=
# override. Can also be "All", or any combination of "Options", =
"FileInfo", =0A=
# "AuthConfig", and "Limit"=0A=
#=0A=
AllowOverride None=0A=
=0A=
#=0A=
# Controls who can get stuff from this server.=0A=
#=0A=
Order allow,deny=0A=
Allow from all=0A=
</Directory>=0A=
=0A=
#=0A=
# UserDir: The name of the directory which is appended onto a user's home=0A=
# directory if a ~user request is received.=0A=
#=0A=
<IfModule mod_userdir.c>=0A=
UserDir public_html=0A=
</IfModule>=0A=
=0A=
#=0A=
# Control access to UserDir directories. The following is an example=0A=
# for a site where these directories are restricted to read-only.=0A=
#=0A=
#<Directory /home/*/public_html>=0A=
# AllowOverride FileInfo AuthConfig Limit=0A=
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec=0A=
# <Limit GET POST OPTIONS PROPFIND>=0A=
# Order allow,deny=0A=
# Allow from all=0A=
# </Limit>=0A=
# <LimitExcept GET POST OPTIONS PROPFIND>=0A=
# Order deny,allow=0A=
# Deny from all=0A=
# </LimitExcept>=0A=
#</Directory>=0A=
=0A=
#=0A=
# DirectoryIndex: Name of the file or files to use as a pre-written HTML=0A=
# directory index. Separate multiple entries with spaces.=0A=
#=0A=
<IfModule mod_dir.c>=0A=
DirectoryIndex index.html=0A=
</IfModule>=0A=
=0A=
#=0A=
# AccessFileName: The name of the file to look for in each directory=0A=
# for access control information.=0A=
#=0A=
AccessFileName .htaccess=0A=
=0A=
#=0A=
# The following lines prevent .htaccess files from being viewed by=0A=
# Web clients. Since .htaccess files often contain authorization=0A=
# information, access is disallowed for security reasons. Comment=0A=
# these lines out if you want Web visitors to see the contents of=0A=
# .htaccess files. If you change the AccessFileName directive above,=0A=
# be sure to make the corresponding changes here.=0A=
#=0A=
# Also, folks tend to use names such as .htpasswd for password=0A=
# files, so this will protect those as well.=0A=
#=0A=
<Files ~ "^\.ht">=0A=
Order allow,deny=0A=
Deny from all=0A=
Satisfy All=0A=
</Files>=0A=
=0A=
#=0A=
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with =
each=0A=
# document that was negotiated on the basis of content. This asks proxy=0A=
# servers not to cache the document. Uncommenting the following line =
disables=0A=
# this behavior, and proxies will be allowed to cache the documents.=0A=
#=0A=
#CacheNegotiatedDocs=0A=
=0A=
#=0A=
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever=0A=
# Apache needs to construct a self-referencing URL (a URL that refers =
back=0A=
# to the server the response is coming from) it will use ServerName and=0A=
# Port to form a "canonical" name. With this setting off, Apache will=0A=
# use the hostname:port that the client supplied, when possible. This=0A=
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.=0A=
#=0A=
UseCanonicalName On=0A=
=0A=
#=0A=
# TypesConfig describes where the mime.types file (or equivalent) is=0A=
# to be found.=0A=
#=0A=
<IfModule mod_mime.c>=0A=
TypesConfig /etc/apache/mime.types=0A=
</IfModule>=0A=
=0A=
#=0A=
# DefaultType is the default MIME type the server will use for a document=0A=
# if it cannot otherwise determine one, such as from filename extensions.=0A=
# If your server contains mostly text or HTML documents, "text/plain" is=0A=
# a good value. If most of your content is binary, such as applications=0A=
# or images, you may want to use "application/octet-stream" instead to=0A=
# keep browsers from trying to display binary files as though they are=0A=
# text.=0A=
#=0A=
DefaultType text/plain=0A=
=0A=
#=0A=
# The mod_mime_magic module allows the server to use various hints from =
the=0A=
# contents of the file itself to determine its type. The MIMEMagicFile=0A=
# directive tells the module where the hint definitions are located.=0A=
# mod_mime_magic is not part of the default server (you have to add=0A=
# it yourself with a LoadModule [see the DSO paragraph in the 'Global=0A=
# Environment' section], or recompile the server and include =
mod_mime_magic=0A=
# as part of the configuration), so it's enclosed in an <IfModule> =
container.=0A=
# This means that the MIMEMagicFile directive will only be processed if =
the=0A=
# module is part of the server.=0A=
#=0A=
<IfModule mod_mime_magic.c>=0A=
MIMEMagicFile /etc/apache/magic=0A=
</IfModule>=0A=
=0A=
#=0A=
# HostnameLookups: Log the names of clients or just their IP addresses=0A=
# e.g., www.apache.org (on) or 204.62.129.132 (off).=0A=
# The default is off because it'd be overall better for the net if people=0A=
# had to knowingly turn this feature on, since enabling it means that=0A=
# each client request will result in AT LEAST one lookup request to the=0A=
# nameserver.=0A=
#=0A=
HostnameLookups Off=0A=
=0A=
#=0A=
# ErrorLog: The location of the error log file.=0A=
# If you do not specify an ErrorLog directive within a <VirtualHost>=0A=
# container, error messages relating to that virtual host will be=0A=
# logged here. If you *do* define an error logfile for a <VirtualHost>=0A=
# container, that host's errors will be logged there and not here.=0A=
#=0A=
ErrorLog /var/log/apache/error_log=0A=
=0A=
#=0A=
# LogLevel: Control the number of messages logged to the error_log.=0A=
# Possible values include: debug, info, notice, warn, error, crit,=0A=
# alert, emerg.=0A=
#=0A=
LogLevel warn=0A=
=0A=
#=0A=
# The following directives define some format nicknames for use with=0A=
# a CustomLog directive (see below).=0A=
#=0A=
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" =
combined=0A=
LogFormat "%h %l %u %t \"%r\" %>s %b" common=0A=
LogFormat "%{Referer}i -> %U" referer=0A=
LogFormat "%{User-agent}i" agent=0A=
=0A=
#=0A=
# The location and format of the access logfile (Common Logfile Format).=0A=
# If you do not define any access logfiles within a <VirtualHost>=0A=
# container, they will be logged here. Contrariwise, if you *do*=0A=
# define per-<VirtualHost> access logfiles, transactions will be=0A=
# logged therein and *not* in this file.=0A=
#=0A=
CustomLog /var/log/apache/access_log common=0A=
=0A=
#=0A=
# If you would like to have agent and referer logfiles, uncomment the=0A=
# following directives.=0A=
#=0A=
#CustomLog /var/log/apache/referer_log referer=0A=
#CustomLog /var/log/apache/agent_log agent=0A=
=0A=
#=0A=
# If you prefer a single logfile with access, agent, and referer =
information=0A=
# (Combined Logfile Format) you can use the following directive.=0A=
#=0A=
#CustomLog /var/log/apache/access_log combined=0A=
=0A=
#=0A=
# Optionally add a line containing the server version and virtual host=0A=
# name to server-generated pages (error documents, FTP directory =
listings,=0A=
# mod_status and mod_info output etc., but not CGI generated documents).=0A=
# Set to "EMail" to also include a mailto: link to the ServerAdmin.=0A=
# Set to one of: On | Off | EMail=0A=
#=0A=
ServerSignature On=0A=
=0A=
# EBCDIC configuration:=0A=
# (only for mainframes using the EBCDIC codeset, currently one of:=0A=
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!=0A=
# The following default configuration assumes that "text files"=0A=
# are stored in EBCDIC (so that you can operate on them using the=0A=
# normal POSIX tools like grep and sort) while "binary files" are=0A=
# stored with identical octets as on an ASCII machine.=0A=
#=0A=
# The directives are evaluated in configuration file order, with=0A=
# the EBCDICConvert directives applied before EBCDICConvertByType.=0A=
#=0A=
# If you want to have ASCII HTML documents and EBCDIC HTML documents=0A=
# at the same time, you can use the file extension to force=0A=
# conversion off for the ASCII documents:=0A=
# > AddType text/html .ahtml=0A=
# > EBCDICConvert Off=3DInOut .ahtml=0A=
#=0A=
# EBCDICConvertByType On=3DInOut text/* message/* multipart/*=0A=
# EBCDICConvertByType On=3DIn application/x-www-form-urlencoded=0A=
# EBCDICConvertByType On=3DInOut application/postscript model/vrml=0A=
# EBCDICConvertByType Off=3DInOut */*=0A=
=0A=
=0A=
#=0A=
# Aliases: Add here as many aliases as you need (with no limit). The =
format is =0A=
# Alias fakename realname=0A=
#=0A=
<IfModule mod_alias.c>=0A=
=0A=
#=0A=
# Note that if you include a trailing / on fakename then the server =
will=0A=
# require it to be present in the URL. So "/icons" isn't aliased in =
this=0A=
# example, only "/icons/". If the fakename is slash-terminated, =
then the =0A=
# realname must also be slash terminated, and if the fakename omits =
the =0A=
# trailing slash, the realname must also omit it.=0A=
#=0A=
Alias /icons/ "/var/www/icons/"=0A=
=0A=
<Directory "/var/www/icons">=0A=
Options Indexes MultiViews=0A=
AllowOverride None=0A=
Order allow,deny=0A=
Allow from all=0A=
</Directory>=0A=
=0A=
# This Alias will project the on-line documentation tree under =
/manual/=0A=
# even if you change the DocumentRoot. Comment it if you don't want =
to =0A=
# provide access to the on-line documentation.=0A=
#=0A=
Alias /manual/ "/var/www/htdocs/manual/"=0A=
=0A=
<Directory "/var/www/htdocs/manual">=0A=
Options Indexes FollowSymlinks MultiViews=0A=
AllowOverride None=0A=
Order allow,deny=0A=
Allow from all=0A=
</Directory>=0A=
=0A=
#=0A=
# ScriptAlias: This controls which directories contain server =
scripts.=0A=
# ScriptAliases are essentially the same as Aliases, except that=0A=
# documents in the realname directory are treated as applications and=0A=
# run by the server when requested rather than as documents sent to =
the client.=0A=
# The same rules about trailing "/" apply to ScriptAlias directives =
as to=0A=
# Alias.=0A=
#=0A=
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"=0A=
=0A=
#=0A=
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased=0A=
# CGI directory exists, if you have that configured.=0A=
#=0A=
<Directory "/var/www/cgi-bin">=0A=
AllowOverride None=0A=
Options None=0A=
Order allow,deny=0A=
Allow from all=0A=
</Directory>=0A=
=0A=
</IfModule>=0A=
# End of aliases.=0A=
=0A=
#=0A=
# Redirect allows you to tell clients about documents which used to =
exist in=0A=
# your server's namespace, but do not anymore. This allows you to tell =
the=0A=
# clients where to look for the relocated document.=0A=
# Format: Redirect old-URI new-URL=0A=
#=0A=
=0A=
#=0A=
# Directives controlling the display of server-generated directory =
listings.=0A=
#=0A=
<IfModule mod_autoindex.c>=0A=
=0A=
#=0A=
# FancyIndexing is whether you want fancy directory indexing or =
standard=0A=
#=0A=
IndexOptions FancyIndexing=0A=
=0A=
#=0A=
# AddIcon* directives tell the server which icon to show for =
different=0A=
# files or filename extensions. These are only displayed for=0A=
# FancyIndexed directories.=0A=
#=0A=
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip=0A=
=0A=
AddIconByType (TXT,/icons/text.gif) text/*=0A=
AddIconByType (IMG,/icons/image2.gif) image/*=0A=
AddIconByType (SND,/icons/sound2.gif) audio/*=0A=
AddIconByType (VID,/icons/movie.gif) video/*=0A=
=0A=
AddIcon /icons/binary.gif .bin .exe=0A=
AddIcon /icons/binhex.gif .hqx=0A=
AddIcon /icons/tar.gif .tar=0A=
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv=0A=
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip=0A=
AddIcon /icons/a.gif .ps .ai .eps=0A=
AddIcon /icons/layout.gif .html .shtml .htm .pdf=0A=
AddIcon /icons/text.gif .txt=0A=
AddIcon /icons/c.gif .c=0A=
AddIcon /icons/p.gif .pl .py=0A=
AddIcon /icons/f.gif .for=0A=
AddIcon /icons/dvi.gif .dvi=0A=
AddIcon /icons/uuencoded.gif .uu=0A=
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl=0A=
AddIcon /icons/tex.gif .tex=0A=
AddIcon /icons/bomb.gif core=0A=
=0A=
AddIcon /icons/back.gif ..=0A=
AddIcon /icons/hand.right.gif README=0A=
AddIcon /icons/folder.gif ^^DIRECTORY^^=0A=
AddIcon /icons/blank.gif ^^BLANKICON^^=0A=
=0A=
#=0A=
# DefaultIcon is which icon to show for files which do not have an =
icon=0A=
# explicitly set.=0A=
#=0A=
DefaultIcon /icons/unknown.gif=0A=
=0A=
#=0A=
# AddDescription allows you to place a short description after a =
file in=0A=
# server-generated indexes. These are only displayed for =
FancyIndexed=0A=
# directories.=0A=
# Format: AddDescription "description" filename=0A=
#=0A=
#AddDescription "GZIP compressed document" .gz=0A=
#AddDescription "tar archive" .tar=0A=
#AddDescription "GZIP compressed tar archive" .tgz=0A=
=0A=
#=0A=
# ReadmeName is the name of the README file the server will look for =
by=0A=
# default, and append to directory listings.=0A=
#=0A=
# HeaderName is the name of a file which should be prepended to=0A=
# directory indexes. =0A=
#=0A=
# If MultiViews are amongst the Options in effect, the server will=0A=
# first look for name.html and include it if found. If name.html=0A=
# doesn't exist, the server will then look for name.txt and include=0A=
# it as plaintext if found.=0A=
#=0A=
ReadmeName README=0A=
HeaderName HEADER=0A=
=0A=
#=0A=
# IndexIgnore is a set of filenames which directory indexing should =
ignore=0A=
# and not include in the listing. Shell-style wildcarding is =
permitted.=0A=
#=0A=
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t=0A=
=0A=
</IfModule>=0A=
# End of indexing directives.=0A=
=0A=
#=0A=
# Document types.=0A=
#=0A=
<IfModule mod_mime.c>=0A=
=0A=
#=0A=
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) =
uncompress=0A=
# information on the fly. Note: Not all browsers support this.=0A=
# Despite the name similarity, the following Add* directives have =
nothing=0A=
# to do with the FancyIndexing customization directives above.=0A=
#=0A=
AddEncoding x-compress Z=0A=
AddEncoding x-gzip gz tgz=0A=
=0A=
#=0A=
# AddLanguage allows you to specify the language of a document. You =
can=0A=
# then use content negotiation to give a browser a file in a language=0A=
# it can understand. =0A=
#=0A=
# Note 1: The suffix does not have to be the same as the language =0A=
# keyword --- those with documents in Polish (whose net-standard =0A=
# language code is pl) may wish to use "AddLanguage pl .po" to =0A=
# avoid the ambiguity with the common suffix for perl scripts.=0A=
#=0A=
# Note 2: The example entries below illustrate that in quite=0A=
# some cases the two character 'Language' abbreviation is not=0A=
# identical to the two character 'Country' code for its country,=0A=
# E.g. 'Danmark/dk' versus 'Danish/da'.=0A=
#=0A=
# Note 3: In the case of 'ltz' we violate the RFC by using a three =
char =0A=
# specifier. But there is 'work in progress' to fix this and get =0A=
# the reference data for rfc1766 cleaned up.=0A=
#=0A=
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)=0A=
# French (fr) - German (de) - Greek-Modern (el)=0A=
# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk =
(nn)=0A=
# Portugese (pt) - Luxembourgeois* (ltz)=0A=
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)=0A=
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)=0A=
# Russian (ru)=0A=
#=0A=
AddLanguage da .dk=0A=
AddLanguage nl .nl=0A=
AddLanguage en .en=0A=
AddLanguage et .ee=0A=
AddLanguage fr .fr=0A=
AddLanguage de .de=0A=
AddLanguage el .el=0A=
AddLanguage he .he=0A=
AddCharset ISO-8859-8 .iso8859-8=0A=
AddLanguage it .it=0A=
AddLanguage ja .ja=0A=
AddCharset ISO-2022-JP .jis=0A=
AddLanguage kr .kr=0A=
AddCharset ISO-2022-KR .iso-kr=0A=
AddLanguage nn .nn=0A=
AddLanguage no .no=0A=
AddLanguage pl .po=0A=
AddCharset ISO-8859-2 .iso-pl=0A=
AddLanguage pt .pt=0A=
AddLanguage pt-br .pt-br=0A=
AddLanguage ltz .lu=0A=
AddLanguage ca .ca=0A=
AddLanguage es .es=0A=
AddLanguage sv .sv=0A=
AddLanguage cz .cz=0A=
AddLanguage ru .ru=0A=
AddLanguage zh-tw .tw=0A=
AddLanguage tw .tw=0A=
AddCharset Big5 .Big5 .big5=0A=
AddCharset WINDOWS-1251 .cp-1251=0A=
AddCharset CP866 .cp866=0A=
AddCharset ISO-8859-5 .iso-ru=0A=
AddCharset KOI8-R .koi8-r=0A=
AddCharset UCS-2 .ucs2=0A=
AddCharset UCS-4 .ucs4=0A=
AddCharset UTF-8 .utf8=0A=
=0A=
# LanguagePriority allows you to give precedence to some languages=0A=
# in case of a tie during content negotiation.=0A=
#=0A=
# Just list the languages in decreasing order of preference. We have=0A=
# more or less alphabetized them here. You probably want to change =
this.=0A=
#=0A=
<IfModule mod_negotiation.c>=0A=
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru =
ltz ca es sv tw=0A=
</IfModule>=0A=
=0A=
#=0A=
# AddType allows you to tweak mime.types without actually editing =
it, or to=0A=
# make certain files to be certain types.=0A=
#=0A=
AddType application/x-tar .tgz=0A=
=0A=
#=0A=
# AddHandler allows you to map certain file extensions to "handlers",=0A=
# actions unrelated to filetype. These can be either built into the =
server=0A=
# or added with the Action command (see below)=0A=
#=0A=
# If you want to use server side includes, or CGI outside=0A=
# ScriptAliased directories, uncomment the following lines.=0A=
#=0A=
# To use CGI scripts:=0A=
#=0A=
#AddHandler cgi-script .cgi=0A=
=0A=
#=0A=
# To use server-parsed HTML files=0A=
#=0A=
#AddType text/html .shtml=0A=
#AddHandler server-parsed .shtml=0A=
=0A=
#=0A=
# Uncomment the following line to enable Apache's send-asis HTTP file=0A=
# feature=0A=
#=0A=
#AddHandler send-as-is asis=0A=
=0A=
#=0A=
# If you wish to use server-parsed imagemap files, use=0A=
#=0A=
#AddHandler imap-file map=0A=
=0A=
#=0A=
# To enable type maps, you might want to use=0A=
#=0A=
#AddHandler type-map var=0A=
=0A=
</IfModule>=0A=
# End of document types.=0A=
=0A=
#=0A=
# Action lets you define media types that will execute a script whenever=0A=
# a matching file is called. This eliminates the need for repeated URL=0A=
# pathnames for oft-used CGI file processors.=0A=
# Format: Action media/type /cgi-script/location=0A=
# Format: Action handler-name /cgi-script/location=0A=
#=0A=
=0A=
#=0A=
# MetaDir: specifies the name of the directory in which Apache can find=0A=
# meta information files. These files contain additional HTTP headers=0A=
# to include when sending the document=0A=
#=0A=
#MetaDir .web=0A=
=0A=
#=0A=
# MetaSuffix: specifies the file name suffix for the file containing the=0A=
# meta information.=0A=
#=0A=
#MetaSuffix .meta=0A=
=0A=
#=0A=
# Customizable error response (Apache style)=0A=
# these come in three flavors=0A=
#=0A=
# 1) plain text=0A=
#ErrorDocument 500 "The server made a boo boo.=0A=
# n.b. the single leading (") marks it as text, it does not get output=0A=
#=0A=
# 2) local redirects=0A=
#ErrorDocument 404 /missing.html=0A=
# to redirect to local URL /missing.html=0A=
#ErrorDocument 404 /cgi-bin/missing_handler.pl=0A=
# N.B.: You can redirect to a script or a document using =
server-side-includes.=0A=
#=0A=
# 3) external redirects=0A=
#ErrorDocument 402 http://some.other-server.com/subscription_info.html=0A=
# N.B.: Many of the environment variables associated with the original=0A=
# request will *not* be available to such a script.=0A=
=0A=
#=0A=
# Customize behaviour based on the browser=0A=
#=0A=
<IfModule mod_setenvif.c>=0A=
=0A=
#=0A=
# The following directives modify normal HTTP response behavior.=0A=
# The first directive disables keepalive for Netscape 2.x and =
browsers that=0A=
# spoof it. There are known problems with these browser =
implementations.=0A=
# The second directive is for Microsoft Internet Explorer 4.0b2=0A=
# which has a broken HTTP/1.1 implementation and does not properly=0A=
# support keepalive when it is used on 301 or 302 (redirect) =
responses.=0A=
#=0A=
BrowserMatch "Mozilla/2" nokeepalive=0A=
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 =
force-response-1.0=0A=
=0A=
#=0A=
# The following directive disables HTTP/1.1 responses to browsers =
which=0A=
# are in violation of the HTTP/1.0 spec by not being able to grok a=0A=
# basic 1.1 response.=0A=
#=0A=
BrowserMatch "RealPlayer 4\.0" force-response-1.0=0A=
BrowserMatch "Java/1\.0" force-response-1.0=0A=
BrowserMatch "JDK/1\.0" force-response-1.0=0A=
=0A=
</IfModule>=0A=
# End of browser customization directives=0A=
=0A=
#=0A=
# Allow server status reports, with the URL of =
http://servername/server-status=0A=
# Change the ".your-domain.com" to match your domain to enable.=0A=
#=0A=
#<Location /server-status>=0A=
# SetHandler server-status=0A=
# Order deny,allow=0A=
# Deny from all=0A=
# Allow from .your-domain.com=0A=
#</Location>=0A=
=0A=
#=0A=
# Allow remote server configuration reports, with the URL of=0A=
# http://servername/server-info (requires that mod_info.c be loaded).=0A=
# Change the ".your-domain.com" to match your domain to enable.=0A=
#=0A=
#<Location /server-info>=0A=
# SetHandler server-info=0A=
# Order deny,allow=0A=
# Deny from all=0A=
# Allow from .your-domain.com=0A=
#</Location>=0A=
=0A=
#=0A=
# There have been reports of people trying to abuse an old bug from =
pre-1.1=0A=
# days. This bug involved a CGI script distributed as a part of Apache.=0A=
# By uncommenting these lines you can redirect these attacks to a =
logging =0A=
# script on phf.apache.org. Or, you can record them yourself, using the =
script=0A=
# support/phf_abuse_log.cgi.=0A=
#=0A=
#<Location /cgi-bin/phf*>=0A=
# Deny from all=0A=
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi=0A=
#</Location>=0A=
=0A=
#=0A=
# Proxy Server directives. Uncomment the following lines to=0A=
# enable the proxy server:=0A=
#=0A=
#<IfModule mod_proxy.c>=0A=
# ProxyRequests On=0A=
=0A=
# <Directory proxy:*>=0A=
# Order deny,allow=0A=
# Deny from all=0A=
# Allow from .your-domain.com=0A=
# </Directory>=0A=
=0A=
#=0A=
# Enable/disable the handling of HTTP/1.1 "Via:" headers.=0A=
# ("Full" adds the server version; "Block" removes all outgoing Via: =
headers)=0A=
# Set to one of: Off | On | Full | Block=0A=
#=0A=
# ProxyVia On=0A=
=0A=
#=0A=
# To enable the cache as well, edit and uncomment the following =
lines:=0A=
# (no cacheing without CacheRoot)=0A=
#=0A=
# CacheRoot "/var/cache/apache"=0A=
# CacheSize 5=0A=
# CacheGcInterval 4=0A=
# CacheMaxExpire 24=0A=
# CacheLastModifiedFactor 0.1=0A=
# CacheDefaultExpire 1=0A=
# NoCache a-domain.com another-domain.edu joes.garage-sale.com=0A=
=0A=
#</IfModule>=0A=
# End of proxy directives.=0A=
=0A=
### Section 3: Virtual Hosts=0A=
#=0A=
# VirtualHost: If you want to maintain multiple domains/hostnames on your=0A=
# machine you can setup VirtualHost containers for them. Most =
configurations=0A=
# use only name-based virtual hosts so the server doesn't need to worry =
about=0A=
# IP addresses. This is indicated by the asterisks in the directives =
below.=0A=
#=0A=
# Please see the documentation at =
<URL:http://www.apache.org/docs/vhosts/>=0A=
# for further details before you try to setup virtual hosts.=0A=
#=0A=
# You may use the command line option '-S' to verify your virtual host=0A=
# configuration.=0A=
=0A=
#=0A=
# Use name-based virtual hosting.=0A=
#=0A=
#NameVirtualHost *=0A=
=0A=
#=0A=
# VirtualHost example:=0A=
# Almost any Apache directive may go into a VirtualHost container.=0A=
# The first VirtualHost section is used for requests without a known=0A=
# server name.=0A=
#=0A=
#<VirtualHost *>=0A=
# ServerAdmin webmaster AT dummy-host DOT example DOT com=0A=
# DocumentRoot /www/docs/dummy-host.example.com=0A=
# ServerName dummy-host.example.com=0A=
# ErrorLog logs/dummy-host.example.com-error_log=0A=
# CustomLog logs/dummy-host.example.com-access_log common=0A=
#</VirtualHost>=0A=
------=_NextPart_000_0000_01C3338C.A50A9CC0
Content-Type: text/plain; charset=us-ascii
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
------=_NextPart_000_0000_01C3338C.A50A9CC0--
- Raw text -