Mail Archives: cygwin/2000/05/15/17:47:02
------=_NextPart_000_000D_01BFBE8D.F60DA9E0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Just d/l and installed the newer .dll. Now having even more problems
building from source. I d/l the src for the new .dll along with it. Put the
source as a peer to my CVS copy of the source. Ran windiff on both
directories, other than CVS specific files and a few checkins from late last
night, all appear to be equal.
Tried to build from both the CVS sources and the tarball source that was
with the new .dll . No luck, appears now configure is running into various
problems with exported functions not being present. Along with some sed
errors.
Please find attached cygcheck -s -v -r and config.logs from both my obj
directory and libiberty sub-dir under obj.
One suggestion that might alleviate all these problems... switch the
snapshot builds to use the newer .dll. IIRC I saw a build log that showed
the snapshots being built with B20.
All help appreciated, obviously I can make use of the cygwin environment,
but very difficult to make changes or submit patches if it will not build
itself?
GBS
------=_NextPart_000_000D_01BFBE8D.F60DA9E0
Content-Type: application/octet-stream;
name="configure_obj.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="configure_obj.log"
Configuring for a i686-pc-cygwin host.
Created "Makefile" in /c/cvs/obj using "mh-frag"
Configuring libiberty...
creating cache ../config.cache
checking host system type... i686-pc-cygwin
checking build system type... i686-pc-cygwin
checking for ar... ar
checking for ranlib... ranlib
checking for gcc... gcc
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking for POSIXized ISC... no
checking for a BSD compatible install... /usr/bin/install -c
checking how to run the C preprocessor... gcc -E
checking for sys/file.h... yes
checking for sys/param.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for unistd.h... yes
checking for strings.h... yes
checking for sys/time.h... yes
checking for sys/resource.h... yes
checking for sys/stat.h... yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking whether the C compiler (gcc -g -O2 ) works... yes
checking whether the C compiler (gcc -g -O2 ) is a cross-compiler... no
checking for asprintf... no
checking for atexit... yes
checking for basename... no
checking for bcmp... yes
checking for bcopy... yes
checking for bzero... yes
checking for calloc... yes
checking for clock... yes
checking for getcwd... yes
checking for getpagesize... yes
checking for index... yes
checking for insque... no
checking for memchr... yes
checking for memcmp... yes
checking for memcpy... yes
checking for memmove... yes
checking for memset... yes
checking for mkstemps... no
checking for putenv... yes
checking for rename... yes
checking for rindex... yes
checking for setenv... yes
checking for sigsetmask... no
checking for strcasecmp... yes
checking for strchr... yes
checking for strdup... yes
checking for strncasecmp... yes
checking for strrchr... yes
checking for strstr... yes
checking for strtod... yes
checking for strtol... yes
checking for strtoul... yes
checking for tmpnam... yes
checking for vasprintf... no
checking for vfprintf... yes
checking for vprintf... yes
checking for vsprintf... yes
checking for waitpid... yes
checking for working alloca.h... no
checking for alloca... yes
checking for ANSI C header files... yes
checking for pid_t... yes
checking for vfork.h... no
checking for working vfork... yes
checking for sys_errlist... no
checking for sys_nerr... no
checking for getrusage... yes
checking for on_exit... no
checking for strerror... yes
checking for sysconf... yes
checking for times... yes
checking for sbrk... yes
checking for gettimeofday... yes
updating cache ../config.cache
creating ./config.status
sed: file conftest.hdr line 1: Unknown option to 's'
creating Makefile
sed: file conftest.s1 line 3: Unknown option to 's'
creating testsuite/Makefile
sed: file conftest.s1 line 3: Unknown option to 's'
creating config.h
sed: file conftest.frag line 1: Unknown option to 's'
Configuring etc...
loading cache ../config.cache
checking for a BSD compatible install... (cached) /usr/bin/install -c
updating cache ../config.cache
sed: file conftest.defs line 1: Unknown option to 's'
creating ./config.status
creating Makefile
sed: file conftest.s1 line 3: Unknown option to 's'
------=_NextPart_000_000D_01BFBE8D.F60DA9E0
Content-Type: application/octet-stream;
name="cygcheck.out"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="cygcheck.out"
Cygnus Win95/NT Configuration Diagnostics
Current System Time: Mon May 15 16:46:44 2000
WinNT Ver 5.0 build 2195=20
Path: /usr/bin
/usr/local/bin
/d/WINNT/system32
/d/WINNT
/d/WINNT/System32/Wbem
/d/Program Files/Support Tools/
/d/Platform SDK/BIN/WINNT
/d/Platform SDK/BIN
/d/Program Files/Microsoft Visual Studio/Common/Tools/WinNT
/d/Program Files/Microsoft Visual Studio/Common/MSDev98/Bin
/d/Program Files/Microsoft Visual Studio/Common/Tools
/d/Program Files/Microsoft Visual Studio/VC98/bin
SysDir: D:\WINNT\System32
WinDir: D:\WINNT
HOME =3D `/c/GordonS'
MAKE_MODE =3D `unix'
PWD =3D `/c/cvs/obj'
TCL_LIBRARY =3D `D:\Program Files\Tcl'
!:: =3D `::\'
!C: =3D `C:\GordonS'
ALLUSERSPROFILE =3D `D:\Documents and Settings\All Users'
APPDATA =3D `D:\Documents and Settings\Gordon Sadler\Application Data'
BASEMAKE =3D `D:\Platform SDK\INCLUDE\BKOFFICE.MAK'
BKOFFICE =3D `D:\Platform SDK\'
COMMONPROGRAMFILES =3D `D:\Program Files\Common Files'
COMPUTERNAME =3D `HOME-DESKTOP'
COMSPEC =3D `D:\WINNT\system32\cmd.exe'
CPU =3D `i386'
DXSDKROOT =3D `D:\Platform SDK'
HOMEDRIVE =3D `D:'
HOMEPATH =3D `\'
HOSTNAME =3D `HOME-DESKTOP'
HOSTTYPE =3D `i686'
INCLUDE =3D `D:\Platform SDK\INCLUDE;D:\Program Files\Microsoft Visual =
Studio\VC98\atl\include;D:\Program Files\Microsoft Visual =
Studio\VC98\mfc\include;D:\Program Files\Microsoft Visual =
Studio\VC98\include'
INETSDK =3D `D:\Platform SDK'
LIB =3D `D:\Platform SDK\LIB;D:\Program Files\Microsoft Visual =
Studio\VC98\mfc\lib;D:\Program Files\Microsoft Visual Studio\VC98\lib'
LOGONSERVER =3D `\\HOME-DESKTOP'
MACHTYPE =3D `i686-pc-cygwin'
MSDEVDIR =3D `D:\Program Files\Microsoft Visual Studio\Common\MSDev98'
MSSDK =3D `D:\Platform SDK'
MSTOOLS =3D `D:\Platform SDK'
NUMBER_OF_PROCESSORS =3D `1'
OLDPWD =3D `/c/GordonS'
OS2LIBPATH =3D `D:\WINNT\system32\os2\dll;'
OS =3D `Windows_NT'
OSTYPE =3D `cygwin'
PATHEXT =3D `.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH'
PROCESSOR_ARCHITECTURE =3D `x86'
PROCESSOR_IDENTIFIER =3D `x86 Family 6 Model 6 Stepping 0, GenuineIntel'
PROCESSOR_LEVEL =3D `6'
PROCESSOR_REVISION =3D `0600'
PROGRAMFILES =3D `D:\Program Files'
PROMPT =3D `$P$G'
SHELL =3D `/bin/sh'
SHLVL =3D `1'
SYSTEMDRIVE =3D `D:'
SYSTEMROOT =3D `D:\WINNT'
TEMP =3D `D:\DOCUME~1\GORDON~1\LOCALS~1\Temp'
TERM =3D `cygwin'
TMP =3D `D:\DOCUME~1\GORDON~1\LOCALS~1\Temp'
USERDOMAIN =3D `HOME-DESKTOP'
USERNAME =3D `Gordon Sadler'
USERPROFILE =3D `D:\Documents and Settings\Gordon Sadler'
WINDIR =3D `D:\WINNT'
_ =3D `/usr/bin/cygcheck'
TZ =3D `CST6CDT5,M4.1.0/2,M10.5.0/2'
HKEY_CURRENT_USER\Software\Cygnus Solutions
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2
(default) =3D `/cygdrive'
cygdrive flags =3D 0x00000020
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/
(default) =3D `c:\cygwin'
flags =3D 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/c
(default) =3D `C:\'
flags =3D 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/cdrom
(default) =3D `e:/'
flags =3D 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/d
(default) =3D `d:/'
flags =3D 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/bin
(default) =3D `c:\cygwin\bin'
flags =3D 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/lib
(default) =3D `c:\cygwin\lib'
flags =3D 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts =
v2\/usr/local/bin
(default) =3D `C:\Cygwin\usr\local\bin'
flags =3D 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts =
v2\/usr/local/lib
(default) =3D `C:\Cygwin\usr\local\lib'
flags =3D 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\00
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\01
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\02
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\03
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\04
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\05
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\06
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\07
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\08
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\09
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0A
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0B
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0C
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0D
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0E
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0F
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\10
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\11
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\12
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\13
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\14
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\15
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\16
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\17
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\18
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\19
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\1A
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\1B
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\1C
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\1D
HKEY_CURRENT_USER\Software\Microsoft\Ftp\Accounts\sourceware.cygnus.com
(default) =3D `anonymous'
Login Attributes =3D 0x00000002
HKEY_CURRENT_USER\Software\Microsoft\Ftp\Accounts\sourceware.cygnus.com\a=
nonymou
(default) =3D `'
HKEY_CURRENT_USER\Software\Microsoft\Ftp\Accounts\sourceware.cygnus.com\a=
nonymous
(default) =3D `'
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Menu=
Order\Start Menu\Programs\Cygnus Solutions
(default) =3D (unsupported type)
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Installed Components
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Installed =
Components\C:/cygwin
(default) =3D `0001.0001.0001'
gcc =3D `0002.0095.0002.0001'
binutils =3D `19990818.0001'
ash =3D `20000510'
findutils =3D `0000'
make =3D `0000'
fileutils =3D `0000'
bash =3D `0000'
shellutils =3D `0000'
textutils =3D `0000'
bison =3D `0000'
bzip =3D `0000'
diff =3D `0000'
gawk =3D `0000'
grep =3D `0000'
gzip =3D `0000'
less =3D `0000'
m =3D `0000'
sed =3D `0000'
tar =3D `0000'
time =3D `0000'
man =3D `0001.005g.0002'
patch =3D `0000'
texinfo =3D `0000'
flex =3D `0000'
byacc =3D `0000'
clear =3D `0001.0000'
dejagnu =3D `0000'
expect =3D `0000'
termcap =3D `0002'
groff =3D `0001.011a.0001'
gdb =3D `20000415'
gperf =3D `0000'
tcltk =3D `0000'
zlib =3D `0001.0001.0003.0001'
libpng =3D `0001.0000.0006.0001'
automake =3D `0001.0004'
autoconf =3D `0002.0013'
tk =3D `0003.0001'
tcl =3D `0003.0001'
perl =3D `latest'
libelf =3D `0000.0006.0004'
eli =3D `0004.0003.0000'
lclint =3D `guide'
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\00
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\01
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\02
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\03
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\04
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\05
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\06
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\07
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\08
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\09
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0A
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0B
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0C
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0D
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0E
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\0F
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\10
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\11
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\12
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\13
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\14
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\15
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\16
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\17
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\18
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\19
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\1A
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\1B
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\1C
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL =
setup\b15.0\mounts\1D
a: fd N/A N/A =20
c: hd FAT 3011Mb 57% CP UN NEW VOLUME
d: hd FAT32 4125Mb 57% CP UN =20
e: cd CDFS 360Mb 100% CS W2PEVL_EN
C:\Cygwin\usr\local\bin /usr/local/bin user binmode
C:\Cygwin\usr\local\lib /usr/local/lib user binmode
c:\cygwin\bin /usr/bin user binmode
c:\cygwin\lib /usr/lib user binmode
c:\cygwin / user binmode
C: /c user textmode
e: /cdrom user textmode
d: /d user textmode
Found: c:\cygwin\bin\bash.exe
Found: c:\cygwin\bin\cat.exe
Found: c:\cygwin\bin\cpp.exe
Found: c:\cygwin\bin\find.exe
Found: c:\cygwin\bin\gcc.exe
Found: c:\cygwin\bin\gdb.exe
Found: c:\cygwin\bin\ld.exe
Found: c:\cygwin\bin\ls.exe
Found: c:\cygwin\bin\make.exe
Found: c:\cygwin\bin\sh.exe
115k 1999/09/14 c:\cygwin\bin\cygitcl30.dll - os=3D4.0 img=3D1.0 =
sys=3D4.0
"cygitcl30.dll" v0.0 ts=3D1999/9/13 21:46
63k 1999/09/14 c:\cygwin\bin\cygitk30.dll - os=3D4.0 img=3D1.0 =
sys=3D4.0
"cygitk30.dll" v0.0 ts=3D1999/9/13 21:47
474k 1999/09/14 c:\cygwin\bin\cygtcl80.dll - os=3D4.0 img=3D1.0 =
sys=3D4.0
"cygtcl80.dll" v0.0 ts=3D1999/9/13 21:31
19k 1999/09/14 c:\cygwin\bin\cygtclpip80.dll - os=3D4.0 img=3D1.0 =
sys=3D4.0
24k 1999/09/14 c:\cygwin\bin\cygtclreg80.dll - os=3D4.0 img=3D1.0 =
sys=3D4.0
"cygtclreg80.dll" v0.0 ts=3D1999/9/13 21:31
768k 1999/09/14 c:\cygwin\bin\cygtk80.dll - os=3D4.0 img=3D1.0 =
sys=3D4.0
"cygtk80.dll" v0.0 ts=3D1999/9/13 21:36
569k 2000/05/15 c:\cygwin\bin\cygwin1.dll - os=3D4.0 img=3D1.0 =
sys=3D4.0
"cygwin1.dll" v0.0 ts=3D2000/5/14 22:48
Use -h to see help about each section
------=_NextPart_000_000D_01BFBE8D.F60DA9E0
Content-Type: application/octet-stream;
name="config_libiberty.log"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="config_libiberty.log"
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
configure:591: checking host system type
configure:614: checking build system type
configure:640: checking for ar
configure:672: checking for ranlib
configure:750: checking for gcc
configure:829: checking whether we are using GNU C
configure:838: gcc -E conftest.c
configure:854: checking whether gcc accepts -g
configure:884: checking for POSIXized ISC
configure:922: checking for a BSD compatible install
configure:983: checking how to run the C preprocessor
configure:1004: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1066: checking for sys/file.h
configure:1076: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1066: checking for sys/param.h
configure:1076: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1066: checking for stdlib.h
configure:1076: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1066: checking for string.h
configure:1076: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1066: checking for unistd.h
configure:1076: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1066: checking for strings.h
configure:1076: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1066: checking for sys/time.h
configure:1076: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1066: checking for sys/resource.h
configure:1076: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1066: checking for sys/stat.h
configure:1076: gcc -E conftest.c >/dev/null 2>conftest.out
configure:1103: checking for sys/wait.h that is POSIX.1 compatible
configure:1124: gcc -c -g -O2 conftest.c 1>&5
configure:1752: checking whether the C compiler (gcc -g -O2 ) works
configure:1768: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1794: checking whether the C compiler (gcc -g -O2 ) is a =
cross-compiler
configure:1801: checking for asprintf
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
/tmp/ccXU1nKB.o: In function `main':
/c/cvs/obj/libiberty/configure:1823: undefined reference to `asprintf'
collect2: ld returned 1 exit status
configure: failed program was:
#line 1806 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char asprintf(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char asprintf();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_asprintf) || defined (__stub___asprintf)
choke me
#else
asprintf();
#endif
; return 0; }
configure:1801: checking for atexit
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for basename
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
/tmp/ccezU4JI.o: In function `main':
/c/cvs/obj/libiberty/configure:1823: undefined reference to `basename'
collect2: ld returned 1 exit status
configure: failed program was:
#line 1806 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char basename(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char basename();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_basename) || defined (__stub___basename)
choke me
#else
basename();
#endif
; return 0; }
configure:1801: checking for bcmp
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for bcopy
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for bzero
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for calloc
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for clock
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for getcwd
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for getpagesize
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for index
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for insque
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
/tmp/ccsh9Hib.o: In function `main':
/c/cvs/obj/libiberty/configure:1823: undefined reference to `insque'
collect2: ld returned 1 exit status
configure: failed program was:
#line 1806 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char insque(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char insque();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_insque) || defined (__stub___insque)
choke me
#else
insque();
#endif
; return 0; }
configure:1801: checking for memchr
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for memcmp
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1813: warning: conflicting types for built-in function =
`memcmp'
configure:1801: checking for memcpy
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1813: warning: conflicting types for built-in function =
`memcpy'
configure:1801: checking for memmove
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for memset
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1813: warning: conflicting types for built-in function =
`memset'
configure:1801: checking for mkstemps
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
/tmp/cci6XN9N.o: In function `main':
/c/cvs/obj/libiberty/configure:1823: undefined reference to `mkstemps'
collect2: ld returned 1 exit status
configure: failed program was:
#line 1806 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char mkstemps(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char mkstemps();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_mkstemps) || defined (__stub___mkstemps)
choke me
#else
mkstemps();
#endif
; return 0; }
configure:1801: checking for putenv
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for rename
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for rindex
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for setenv
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for sigsetmask
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
/tmp/ccYmr6Y2.o: In function `main':
/c/cvs/obj/libiberty/configure:1823: undefined reference to `sigsetmask'
collect2: ld returned 1 exit status
configure: failed program was:
#line 1806 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char sigsetmask(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char sigsetmask();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_sigsetmask) || defined (__stub___sigsetmask)
choke me
#else
sigsetmask();
#endif
; return 0; }
configure:1801: checking for strcasecmp
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for strchr
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for strdup
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for strncasecmp
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for strrchr
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for strstr
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for strtod
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for strtol
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for strtoul
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for tmpnam
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for vasprintf
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
/tmp/cchrg1i4.o: In function `main':
/c/cvs/obj/libiberty/configure:1823: undefined reference to `vasprintf'
collect2: ld returned 1 exit status
configure: failed program was:
#line 1806 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vasprintf(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char vasprintf();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_vasprintf) || defined (__stub___vasprintf)
choke me
#else
vasprintf();
#endif
; return 0; }
configure:1801: checking for vfprintf
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for vprintf
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for vsprintf
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1801: checking for waitpid
configure:1829: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1876: checking for working alloca.h
configure:1888: gcc -o conftest -g -O2 conftest.c 1>&5
configure:1882: alloca.h: No such file or directory
configure: failed program was:
#line 1881 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p =3D alloca(2 * sizeof(int));
; return 0; }
configure:1909: checking for alloca
configure:1942: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2111: checking for ANSI C header files
configure:2124: gcc -E conftest.c >/dev/null 2>conftest.out
configure:2191: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2215: checking for pid_t
configure:2249: checking for vfork.h
configure:2259: gcc -E conftest.c >/dev/null 2>conftest.out
configure:2255: vfork.h: No such file or directory
configure: failed program was:
#line 2254 "configure"
#include "confdefs.h"
#include <vfork.h>
configure:2284: checking for working vfork
configure:2435: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2462: checking for sys_errlist
configure:2474: gcc -o conftest -g -O2 conftest.c 1>&5
/tmp/cchRREL4.o: In function `main':
/c/cvs/obj/libiberty/configure:2470: undefined reference to =
`sys_errlist'
collect2: ld returned 1 exit status
configure: failed program was:
#line 2467 "configure"
#include "confdefs.h"
int *p;
int main() {
extern int sys_errlist; p =3D &sys_errlist;
; return 0; }
configure:2462: checking for sys_nerr
configure:2474: gcc -o conftest -g -O2 conftest.c 1>&5
/tmp/cc5y3kjh.o: In function `main':
/c/cvs/obj/libiberty/configure:2470: undefined reference to `sys_nerr'
collect2: ld returned 1 exit status
configure: failed program was:
#line 2467 "configure"
#include "confdefs.h"
int *p;
int main() {
extern int sys_nerr; p =3D &sys_nerr;
; return 0; }
configure:2500: checking for getrusage
configure:2528: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2500: checking for on_exit
configure:2528: gcc -o conftest -g -O2 conftest.c 1>&5
/tmp/ccVCu7iq.o: In function `main':
/c/cvs/obj/libiberty/configure:2522: undefined reference to `on_exit'
collect2: ld returned 1 exit status
configure: failed program was:
#line 2505 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char on_exit(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char on_exit();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_on_exit) || defined (__stub___on_exit)
choke me
#else
on_exit();
#endif
; return 0; }
configure:2500: checking for strerror
configure:2528: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2500: checking for sysconf
configure:2528: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2500: checking for times
configure:2528: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2500: checking for sbrk
configure:2528: gcc -o conftest -g -O2 conftest.c 1>&5
configure:2500: checking for gettimeofday
configure:2528: gcc -o conftest -g -O2 conftest.c 1>&5
------=_NextPart_000_000D_01BFBE8D.F60DA9E0
Content-Type: text/plain; charset=us-ascii
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe AT sourceware DOT cygnus DOT com
------=_NextPart_000_000D_01BFBE8D.F60DA9E0--
- Raw text -