Category: <b>network</b>
<p>
<pre><b>INT 7A - Novell NetWare - SPX Driver - ESTABLISH SPX CONNECTION</b>

	BX = 0011h
	AL = retry count
	AH = watchdog flag
	ES:SI -&gt; Event Control Block (see <a href=../../it/10/38.html>#03810</a> at BX=0003h)
Return: AL = status (00h,EFh,FDh,FFh) (see <a href=../../it/25/38.html>#03825</a>)
	DX = assigned connection ID number
Desc:	attempt to establish a connection with a listening socket
Notes:	there should always be at least two SPX ECB's listening to a socket, so
	  that NetWare can perform its internal packet exchanges
	the first fragment should start with a SPX header (see <a href=../../it/26/38.html>#03826</a>).	Fill
	  in all destination addresses.
	this function is supported by Advanced NetWare 2.1+
SeeAlso: BX=0000h,BX=0012h,BX=0013h,BX=0014h,BX=0015h

</pre>