Category: <b>other operating systems</b>
<p>
<pre><b>INT 15 - VMiX - "sys_chanreq" - I/O CHANNEL OBJECT MANAGER</b>

	AH = 01h
	STACK:	WORD	object ID of requestor
		DWORD	pointer to ASCIZ name of requested method
			"assign" assign channel to object
			"deassign" deassign channel
			"cursor" set cursor on/off
			"init" initialize comm port
			"open" open I/O channel
			"position" set cursor position
			"receive" get buffered packet from comm port
			"send" send buffered packet to comm port
			"vio" set current virtual I/O to specified channel
			"window" make window at cursor position
		---if "assign"---
		 WORD	object UID
		 WORD	caller UID/PID
		 DWORD	CSL with port
		---if "deassign"---
		 WORD	channel ID
		---if "cursor"---
		 WORD	channel ID (must be a SRCSINK)
		 WORD	new state (0000h off, 0001h on)
		---if "init"---
		 WORD	channel ID (must be a SRCSINK)
		 WORD	comm port number (00h-03h)
		 WORD	UART init code
		---if "open"---
		 WORD	channel ID
		---if "position"---
		 WORD	channel ID (must be a SRCSINK)
		 WORD	position (high byte = row, low byte = column)
		---if "receive"---
		 DWORD	pointer to buffer
		---if "send"---
		 WORD	length of buffer
		 DWORD	pointer to buffer
		---if "vio"---
		 WORD	channel ID (must be a SRCSINK)
		---if "window"---
		 WORD	top left (high byte = row, low byte = column)
		 WORD	bottom right (high byte = row, low byte = column)
Return: DX:AX -&gt; IRP structure or 0000h:0000h
SeeAlso: AH=00h"VMiX",AH=02h"VMiX"
</pre>