Category: <b>serial I/O</b>
<p>
<pre><b>INT 14 - Digiboard - CCB COMMAND - SET BREAK COUNT</b>

	AX = 164Ah
	BL = break count
	CL = byte 1
	DX = port number (00h-03h) (04h-43h for XAPCM232.SYS)
Return: AH = status
	    00h successful
	    80h error
	    FFh error
SeeAlso: AH=16h"Digiboard",AX=1649h,AX=164Bh
</pre>