Category: <b>DOS extenders</b>
<br>Flags: available only in protected mode<p>
<pre><b>INT 31 - DPMI 0.9+ - SET SEGMENT BASE ADDRESS</b>

	AX = 0007h
	BX = selector
	CX:DX = linear base address
Return: CF clear if successful
	CF set on error
	    AX = error code (DPMI 1.0+) (8022h,8025h) (see <a href=../../it/43/31.html>#03143</a>)
Notes:	only modify descriptors allocated with INT 31/AX=0000h
	only the low 24 bits of the address will be used by 16-bit DPMI
	  implementations even on a 386 or higher
	DPMI 1.0+ automatically reloads any segment registers containing the
	  selector being modified
	not supported by MS Windows 3.0 in Standard mode
SeeAlso: AX=0006h,AX=0008h,AX=0009h,AX=000Ch,INT 21/AX=3503h
SeeAlso: INT 21/AH=E9h"OS/286",INT 2C/AX=0002h
</pre>