Category: <b>BIOS</b>
<p>
<pre><b>INT 13 - DISK - RESET DISK SYSTEM</b>

	AH = 00h
	DL = drive (if bit 7 is set both hard disks and floppy disks reset)
Return: AH = status (see <a href=../../it/34/2.html>#00234</a>)
	CF clear if successful (returned AH=00h)
	CF set on error
Note:	forces controller to recalibrate drive heads (seek to track 0)
	for PS/2 35SX, 35LS, 40SX and L40SX, as well as many other systems,
	  both the master drive and the slave drive respond to the Reset
	  function that is issued to either drive
SeeAlso: AH=0Dh,AH=11h,INT 21/AH=0Dh,INT 4D/AH=00h"TI Professional"
SeeAlso: INT 56"Tandy 2000",MEM 0040h:003Eh
</pre>