From: Hans-Bernhard Broeker <broeker AT physik DOT rwth-aachen DOT de>
Newsgroups: comp.os.msdos.djgpp
Subject: Re: cant MAKE or RUN in RHIDE
Date: 17 Feb 2003 12:59:29 GMT
Organization: Aachen University of Technology (RWTH)
Lines: 13
Message-ID: <b2qmbh$s05$1@nets3.rz.RWTH-Aachen.DE>
References: <oQi3a.341928$HG DOT 57358048 AT news4 DOT srv DOT hcvlny DOT cv DOT net> <99vr4vkkmq25kbrrddd41vmbk40akl8a8a AT 4ax DOT com> <eEu3a.352752$HG DOT 59631227 AT news4 DOT srv DOT hcvlny DOT cv DOT net>
NNTP-Posting-Host: acp3bf.physik.rwth-aachen.de
X-Trace: nets3.rz.RWTH-Aachen.DE 1045486769 28677 137.226.32.75 (17 Feb 2003 12:59:29 GMT)
X-Complaints-To: abuse AT rwth-aachen DOT de
NNTP-Posting-Date: 17 Feb 2003 12:59:29 GMT
Originator: broeker@
To: djgpp AT delorie DOT com
DJ-Gateway: from newsgroup comp.os.msdos.djgpp
Reply-To: djgpp AT delorie DOT com

Mr. Newb <mrnewb AT sc DOT com> wrote:
> i ran rhide from the C:\ prompt, compiling didnt work.

> then i ran it when the prompt was C:\DJGPP. now it works

Unless you put your source files directly in the c:\djgpp directory,
this almost certainly means something in your configuration is still
broken, most likely because you didn't really follow the instructions
of the ZIP picker and/or README.1st.

-- 
Hans-Bernhard Broeker (broeker AT physik DOT rwth-aachen DOT de)
Even if all the snow were burnt, ashes would remain.